Partition Windows 10 2013 MacPro (BootCamp) Installation problem

Similar Questions

• Streets & trips 2013 details download installation problems...

  The installation seems to work, but the program may not be running.  Control Panel verifies that the software is installed (1.8 GB) while the installer has not created an S & T normal ICON and the software cannot be loaded even by clicking on the executable file in the program directory files. I have installed/uninstalled the program several times.  Turned off Norton antivirus and firewall and Windows Firewall protection. Restarted again and again. Nothing has worked...

  -Error message: "cannot find a network share or removable device, the DVD is not in the drive or installing this application is damaged.  Make sure that the drive you installed is attached, the DVD is in the drive, your network is connected, or run the installation again from its original installed location. (5-40003-6) ".

  ANYONE KNOW IF THERE IS A FIX FOR THIS PROBLEM YET?

  Hello

  Looks like you've already discovered the streets and travel Forum.

  Streets & trips 2013 details download installation problems:
  http://social.Microsoft.com/forums/en-us/streetsandtrips/thread/a3c90cf2-ab59-4f82-9404-a8cc0a9b9a05

  Concerning

• Partition Windows 10 disappeared after the installation of El Capitan

  @Loner T - seems you have helped others on this question and hope you can help me through it too.  I have a MBP early in 2013 with a 500 GB SSD.  I allowed the upgrade to El Capitan, and like others, this is the boot camp partition disappear.   Holding the option key pressed when starting displays only the ability to boot into OS X.  Here's what I've done so far:

  -SIP is disabled.  Confirmed after restarting normally by typing csrutil status

  -Tried to do the other bootable partition using your instructions on

  -fdisk/dev/disk0-e

  -Pei

  -setpid 4

  -07

  -Pavilion 4

  -Pei

  -w

  -y

  After resigning, I restarted and press option.  Windows now appears when I press and hold option, but when selecting it I get the error "Missing Operating System".

  Here is the result of all other orders:

  diskutil list gives:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 300.0 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database 101,0 GB disk0s4

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 299,6 disk1

  Logical volume on disk0s2

  DAED883D-1E3E-48A7-A986-A2C2E5483BE7

  Unencrypted

  CS-diskutil list displays

  

  TPG - vv - r see the/dev/disk0 poster:

  

  sudo fdisk/dev/disk0 gives:

  
  

  
  

  I think all this means I have a lost partition as you described to others.  I downloaded Testdisk and gdisk.  Output of TestDisk:

  

  Run a quick scan on drive Test and see these unrecoverable partitions (stupid question this mean that they are lost for good or they are good and that they need not be recovered?) 。

  

  Prosecutor:

  

  Product selection P here:

  

  These are the values that I can use in steps 7 and 8 in this post?

  
  

  Step 7-587618304

  Step 8- + 388564992

  In the first series of markets Gdisk. The second set of rebuild MBR is the same for a standard installation of BC.

• Windows update KB 2686509 security installation problem (error code is 0X8007F0F4)

  original title: I'm having a problem installing to a KB 2686509 windows security update.  The update downloads but continues to do not settle.  The error code is 0X8007F0F4.  What can I do to solve to partition?

  This installation has "failed" to install several times.  I keep getting the security shield on the toolbar.

  Hello

  I suggest you follow the steps listed in this article and check if this may help.

  http://support.Microsoft.com/kb/958051

• Windows Vista Service Pack 2 installation problem

  I am having major problems installing service pack 2 on windows Vista on a Dell Inspiron from 32-bit. It returns the 8007000D error code.

  I tried the PC back to factory settings, removing the anti-virus and the deactivation of some things non-nessasary start up with msconfig. Also, I have disabled all the wireless devices using a switch on the side of the laptop - it seems that would enable me to install service pack 1.

  Even with all the foregoing it always fails and recommends the system "Update system tool" update running. I have run, restart the computer and run the SP2 and it does not always work with the same error message.

  The only other methods recommended to install must remove antiviris and other programs that I've done so I don't know what to do!

  Help, please!

  Thank you

  Matthew

  Robear,

  Thanks for your reply.

  I looked at the link (http://support.microsoft.com/kb/947366) and went through all the troubleshooting guide without success. With my current attempts to install SP2 (after the return to factory settings), I remove McAfee from the computer (that came with it as default) and then install the service pack SP1 and SP2 by using the stand-alone installation programs by downloading from another computer.

  Thank you for give me the Microsoft technical support link, that I had read on another thread that the free support is exhausted.

  I will try to sue microsoft and come back here if I have any luck!

  Thank you

  Matthew

• Windows 8 HP LJ2030 Driver installation problem

  I have a HP Laserjet P2035 printer and a brand new Windows 8 computer.  The printer was purchased several years ago and has been used with a Windows XP box. When I joined the printer to the new computer via a port USB<->USB cable, it was not recognized. Manually, I downloaded the driver on the HP website and tried to install it several times without success. I finally found the log associated with the installation procedure.  The following are entered during my last attempt to install the driver by clicking on the app "ljP2035-gdi-pnp-win64 - in .exe:

  [11/08/2013 13:51:35:112] - LOG (1110): PRODUCTInst -.
  [11/08/2013 13:51:35:112] - LOG (1110): InitProperties - retrieve the accessories of the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\properties.ini".
  [11/08/2013 13:51:35:112] - LOG (1110): the Installer version: 1.0.5.3
  [11/08/2013 13:51:35:127] - LOG (1110): - Language ID -
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI by default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): language of the UI system default = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): user language = 1033 default ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): language = 1033 default system ID, 0x409
  [11/08/2013 13:51:35:127] - LOG (1110): ID of the language to use = 1033, 0 x 409
  [11/08/2013 13:51:35:127] - LOG (1110): Is64BitWindows()
  [11/08/2013 13:51:35:127] - LOG (1110): compiled as app 64 bit so must be on 64-bit Windows.
  [11/08/2013 13:51:35:143] - LOG (1110): operating system is 64-bit
  [11/08/2013 13:51:35:143] - LOG (1110): cmdline "PRODUCTIVE."
  [11/08/2013 13:51:35:143] - LOG (1110):--/-/ \-proprietes-/------------------/.
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_INFNAME = HP2030. INF
  [11/08/2013 13:51:35:143] - LOG (1110): PRINT_VERNAME = HP2030SU. WORM
  [11/08/2013 13:51:35:143] - LOG (1110): SHORT_PRINTER_NAME = HP LaserJet P203
  [11/08/2013 13:51:35:143] - LOG (1110): PRINTER_SERIES_NAME = HP LaserJet P2030 series
  [11/08/2013 13:51:35:143] - LOG (1110): PRODUCT_VIDPID = vid_03f0 & pid_5d17
  [11/08/2013 13:51:35:158] - LOG (1110): REG_INSTALLKEY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110): ISRUNNING_MUTEX_NAME = HP2030Installexists
  [11/08/2013 13:51:35:158] - LOG (1110): INSTALL_DIRECTORY = HP LaserJet P2030 series
  [11/08/2013 13:51:35:158] - LOG (1110) :-/-/-/--properties-------------/------.
  [11/08/2013 13:51:35:158] - LOG (1110): PRODUCT installation program.
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer()
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() = 0 step
  [11/08/2013 13:51:35:158] - LOG (1110): InstallSequencer() step = 1
  [11/08/2013 13:51:35:158] - LOG (1110): - InitializeStep -
  [11/08/2013 13:51:35:174] - LOG (1110): GetLandDir - English
  [11/08/2013 13:51:35:174] - LOG (1110): printer inf: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\HP2030. INF
  [11/08/2013 13:51:35:174] - LOG (1110): file printer verion: C:\Users\ZekeAppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:35:174] - LOG (1110): name of the printer series: series HP LaserJet P2030
  [11/08/2013 13:51:35:174] - LOG (1110): GetPrinternamesFromINF()
  [11/08/2013 13:51:35:205] - LOG (1110): InstallSequencer() step = 3
  [11/08/2013 13:51:35:205] - LOG (1110): - LicenseStep -
  [11/08/2013 13:51:35:205] - LOG (1110): license file: "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:221] - LOG (1110): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog
  [11/08/2013 13:51:35:237] - LOG (1110): chaines(): stringsDllPath: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\strings.dll
  [11/08/2013 13:51:35:237] - LOG (1110): IDLCGenericTextDlg:nInitDialog - text to load the file "C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\\license.txt".
  [11/08/2013 13:51:35:237] - LOG (1110): text is clear
  [11/08/2013 13:51:39:141] - LOG (1110):-[IDLCGenericTextDlg 1 BUTTON pressed].
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() g_progressDlgRunning = 0
  [11/08/2013 13:51:39:141] - LOG (1110): StartProgressDialog() from dialog progress thread...
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:nInitDialog()
  [11/08/2013 13:51:39:141] - LOG(13A4): IDLCProgressDlg:oDataExchange
  [11/08/2013 13:51:39:156] - LOG(13A4): IDLCDialog:nInitDialog() m_positionOnBottom = 0, m_topmost = 1, m_followPosition = 0
  [11/08/2013 13:51:39:656] - LOG (1110): InstallSequencer() = 4 step
  [11/08/2013 13:51:39:656] - LOG (1110): - PreInstallStep -
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (List)
  [11/08/2013 13:51:39:656] - LOG (1110): IsDriverInstalled (HP LaserJet P2035)
  [11/08/2013 13:51:39:656] - LOG (1110): FindInstalledDrivers()
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft XPS Document Writer v4
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = Microsoft shared fax driver
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = drive compatibility point and print more Microsoft
  [11/08/2013 13:51:39:672] - LOG (1110): PrinterDriver?  HP LaserJet P2035? = HP LaserJet P2035
  [11/08/2013 13:51:39:688] - LOG (1110): found driver
  [11/08/2013 13:51:39:688] - LOG (1110): PrinterDriver?  HP LaserJet P2035? HP ePrint =
  [11/08/2013 13:51:39:703] - LOG (1110): current verion printer file: C:\windows\system32\spool\DRIVERS\x64\3\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): file Web bundle printer verion: C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM
  [11/08/2013 13:51:39:703] - LOG (1110): ===>>> (gle = 2, 0 x 2) ERROR: Msg: the system cannot find the specified file.

  Context: Could not open the file of version ' C:\Users\Zeke\AppData\Local\Temp\7zS2BFD\HP2030SU. WORM '
  [11/08/2013 13:51:39:703] - LOG (1110): Web bundle is older than the current 20120627 (3.0.1.52444)
  [11/08/2013 13:51:39:703] - LOG (1110): driver currently installed, but newer than the web package.  NEED NOT UPDATE!
  [11/08/2013 13:51:39:703] - LOG (1110): InstallSequencer() step = 7
  [11/08/2013 13:51:39:703] - LOG (1110): TerminateProgressThrd (0x44a110)
  [11/08/2013 13:51:39:719] - LOG (1110): _PostProgressMessage hWnd = 0x1402c2 msg = 1124, param = 0
  [11/08/2013 13:51:39:719] - LOG(13A4): IDLCProgressDlg:nTerminate()
  [11/08/2013 13:51:40:235] - LOG (1110): - FinishStep -

  The log entry indicates the driver already installed but the Windows Device Manager seems not to think (see attached image). By clicking on 'Properties', then on 'Events', I saw the following message (see second image). I have no idea what this error code means. Can anyone provide some ideas of what I can do next? I hate the idea of making a new printer, if there is a software solution. The printer still works fine.  For what it's worth, through the Windows Device Manager, I uninstalled the printer and driver once already in order to get a clean installation of the driver.

  Thanks for any help,

  Zeke

  Fixed. "Follow-up"clean boot"as described here: 'http://support.microsoft.com/kb/929135 ' Windows recognize it now and I can use my printer.".

• Authentication (Windows Server 2013) AD Cisco ISE problem

  Background:

  Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

  Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

  Problem:

  Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

  

  Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

  xxdc01.XX.com (10.21.3.1)

  Ping: 0 Mins Ago

  Status: down

  xxdc02.XX.com (10.21.3.2)

  Ping: 0 Mins Ago

  Status: down

  xxdc01.XX.com

  Last success: Thu Jan 1 10:00 1970

  March 11 failure: read 11:18:04 2013

  Success: 0

  Chess: 11006

  xxdc02.XX.com

  Last success: Fri Mar 11 09:43:31 2013

  March 11 failure: read 11:18:04 2013

  Success: 25

  Chess: 11006

  Domain controller: xxdc02.xx.com:389

  Domain controller type: unknown functional level DC: 5

  Domain name: xx.COM

  IsGlobalCatalogReady: TRUE

  DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  Action taken:

  Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

  (2) wireless authentication tested using EAP-FAST, but same problem occurs.

  (3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

  12304 extract EAP-response containing PEAP stimulus / response

  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity Store - AD1

  24430 Authenticating user in Active Directory

  24444 active Directory operation failed because of an error that is not specified in the ISE

  (4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

  (5) wireless tested on different mobile phones with the same error and laptos

  (6) delete and add new customer/features of AAA Cisco ISE and WLC

  (7) ISE services restarted

  (8) join domain on Cisco ISE

  (9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

  10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

  Other possibilities/action:

  1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

  (2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

  Did he experienced something similar to have ideas on why what is happening?

  Thank you.

  Update:

  (1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

  (2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

  This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

  
  

  
  

  Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

  External identity Source OS/Version

  Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

  Active Directory Microsoft Windows 2008 32-bit and 64-bit

  Microsoft Windows Active Directory 2008 R2 64-bit only

  Microsoft Windows Active Directory 2003 32-bit only

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF

• VDDK, Windows 7 and 2008 R2 installation problem or volumes

  With the ESX update we can snapshot Windows 7 and 2008 R2 system but try to mount the volumes snapshoted with VDDK return 24305 - the specified volume is already mounted.

  Is this a known issue? We use VDDK ' VMware-vix-disklib - 1.1.1 - 207031.

  Thank you

  -Ron

  When calling for the information of the OS, it is possible that internal one or several volumes can be mounted. So a call to MountVolume can return with the return code "Volume already mounted. This should not be considered a failure. You can call to remove the volume (and close the disk) when finished.

  Thank you

  Annick

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• Bootcamp partition Windows will not start since WinUpdate

  I'm working on a MacMini (mid 2011) on which a bootcamp partition has been installed. I had to work on windows update etc...

  So I did update from our wsus server, and then restart Windows, windows no longer starts. There was a line of white underscore flashing on a black screen.

  I tried to see if the Mac partition (10.7) was able to start. It has been altered too, but I was able to reinstall it.

  __

  on windows, I followed these instructions: https://discussions.apple.com/thread/4936761?tstart=0

  To do this, I created a USB bootable key WIN10 (regardless of the Version of the OS in this case), I started on it to access the repair menu. Here, I opened the CMD and had results of the thesis:

  
  x:\sources>cd c:\ 
  
  x:\sources>Bootrec.exe /Fixmbr 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /FixBoot 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /RebuildBcd 
  
  Number of windows installation identified : 1 Add the installation to boot list ? : O 
  
  Asked System Device not found. 
  

  I assumed it was due to drivers for windows compatibility. (something like record of $ $WinPEDriver), but no idea how to put them on my bootcamp partition, previously never worked with bootcamp.

  I should also mention, I tried a classic Windows repair, he told me that my windows partition has been locked. I assumed it was a problem of version of bootcamp. I've updated everything on my mac partition, but he found no update for bootcamp. Right now I'm preparing a bootable usb key with both 'iso' and 'windows compatibility modules' activated with bootcamp assistant.

  I don't know when it happens, but now, when I try to boot on my bootcamp partition, there are only blackscreen (not slider more). But also, my screen flashes as if he finally gets the signal just before the black screen.

  I need your help for:

  -Fixed problem starting Windows partition, OR...

  -Give me a way to get the activation key for the license of the installed windows (without starting it (if it exists)), so I can reinstall it correctly.

  Thanks for the kind help and forgive my bad English.

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  What version of Windows?

  DiskPart should be used to clear the readonly attributes.

  Bootrec.exe must be used that on C:, otherwise it is written to X:. CD C:\ should be replaced with C: only if you are on the C: drive.

  If you run Diskpart, please after the release of

  list disk

  partition from the list

  the list volume

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• (Redirected) 10 Windows installation problems.

  I'm having the problem of installation for Windows 10.  I have an Inspiron 15 3521.   I download Windows 10 and start the installation. Then download the message, it cannot update the reserved partition.  When I open the Disk Manager I can't find reserved partition. I tried several programs to extend the partition of the reserve, but in vain. Does anyone have any suggestions?

  Hi mr1woody,

  Please repost this in the software and the operating system, Windows 10 forum help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Update Vista Update Readiness Tool system for Windows Vista (KB947821) [September 2009] - Installation failed due to the error Code 09370001 - how can I solve this problem?

  I have the same error Code 09370001 which appears whenever my PC is trying to install the update: System Readiness Tool for Windows Vista KB947821... I have 7 failures of my PC, try to install this update.

  My system is:
  Windows Vista Premium Hm
  Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  3.00 GB RAM
  Mobile Intel (r) 965 Express Chipset Family

  Can someone guide me how I can get this update to install?

  Thank you so much in advance.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates