partition 'Windows cannot delete the active system partition on this disk.

Similar Questions

• cannot delete the activity led

  Hello

  I use an activity indicator while a thread is processing data

  before you begin the task, there is no visible activity indicator-

  I insert the Acticvity indicator in a Manager successfully

  and put a red background

  then after completing the task, I'll put the green background and want to emove the activity indicator

  but I always get an illegal state Exception

  any ideas?

  if (!running) {
          activity.getModel().cancel();
          if (statusManager.getField(0) == activity) {
              try {
                  statusManager.delete(activity);
              } catch (IllegalArgumentException e) {
                  //
              }
          }
          statusManager.setBackground(greenBackground);
  } else {
          if (statusManager.getField(0) != activity) {
              statusManager.insert(activity, 0);
          }
          statusManager.setBackground(redBackground);
          activity.getModel().resume();
      }
  

  What part gives you the IllegalStateException? My first look at this leads me to think that it is probably a problem with trying to change the user interface of a thread without obtaining the lock of the event. In addition, it may be useful to know what are your objects.

• Cannot delete the backup files to external HARD disk

  I tried to remove most of the backup sets on an external HARD drive, but always free poster of 465 GB file Explorer only 213 GB.  I chose the drive in "Disk Clean-up, but which showed no files to delete.  I had a virus on the disk scan to see what files have been on this subject, and so there are hundreds of thousands of them, starting by ' $RECYCLE. BIN... ".  Anyone know how to remove these?  Operating system is Windows Vista SP2.

  Hi John

  Some of the files that you see (as the trash) are system files and do not need to be deleted.

  Before taking other measures, what volume of personal files is on the external hard drive? Did you direct copies of music/photos etc.? -"Free 465 GB only 213 GB" is not quantify how many do you think should be free!

  Also - what the drive and were records of backup performed using embedded software of the player?

  The best solution here is perhaps simply reformat the drive (after making sure that you have an exact replica of all personal files on your pc that you can then copy to it) but give us a little more detail the first.

  Thank you - R

• I get a message saying "Windows cannot open the file...". »

  I had a lot of problems with infections, so I was running many scanning programs.

  After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program.  We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).

  Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:

  "Windows cannot open the file.  To open this file, Windows needs to know what kind of program has created.  Windows can go online to search automatically, or you can manually select from a list of programs.

  When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing.  I am also very scared that I can also get another infection from these sites.

  I hope someone can help me solve this problem.

  StanEp

  Yes, each method is a set of measures to try and then go ahead and try each one separate.

  2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.

  Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

  Hello

  Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

  No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

  Thanks for your response

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot delete the file - Windows 7 cannot check location

  Hello all,.

  After the upgrade to Windows 7, I tried to delete the Windows.old folder. However, I encountered a problem; There are two files in this folder that Windows 7 can not remove. When I try to delete them, I get an error message stating that Windows cannot locate the two files and it asks me to check their location. Is there a way to get around this?

  Thank you

  Garrick

  When the above does not work, try this:

  1. click on windows orb
  2. type cmd in the search box
  3. right click on cmd in the results menu and click on run as administrator
  4. control windows opens, must be in the directory c:\windows\system32
  5. go into c:\ do this type cd... until you reach c:\
  6 goto directory where the file to be deleted. example c:\windows.old\users
  7 type rd /s (directory name)
  8 get invites to delete y/n type y and press on enter

  After successful removal, you can check the windows Explorer and see that the file is missing.

  Example, I have a directory on my c drive named windows.old, under windows.old that I have a user directory and then several subdirectories, 1 directory happens to be named bill. For some reason any windows can not find this place and will not delete the folder. I then who follow the previous steps and remove this directory.

  So, in step 6, I would like to c:\windows.old\users goto, I then head to step 7 and enter the rd/s Bill and enter. Follow step 8 and the file is missing.

  Let us know if that helps.

• Activation of Windows 7 - Windows cannot access the specified device

  I enter a new key in my computer, it says that it is not genuine now.

  When I try and and activate by clicking on the link activate it says:

  S read - C:\Windows\system32\slui.exe pop-up box, with following information inside the box:

  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am the only user on the system and I am an administrator.

  When I tried to run slui.exe 4 cmd prompt increased from I got access denied.

  Thank you

  Thank you for your help. In fact, I could solve the problem of installing the SP1, and then uninstall Windows Genuine Advantage was an option of front.

  Thank you once again

• Upgrade CPU, system does not boot, winload.exe "Windows cannot verify the digital signature for this file.

  Subject pretty much said it all.  I got a new CPU, shut down the computer, installed, and now Win7 does not start.  It hangs on a black screen gripe on a signature file.  Here is the full text:

  "A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source."

  If you have a Windows installation disc, insert the disc and restart your computer.  Click 'Repair your computer' and choose a recovery tool.

  Otherwise, to start Windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, select last known good configuration.  If you understand why the digital signature file cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  File: \Windows\system32\winload.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file. »

  Well, the first thing I did was put in the installation CD and reboot to try the thing "repair your computer".  Charge, said he found a problem, said he has fixed the problem and restarted.  But it always hangs on the same screen of the error.

  So I tried to hit Enter and then F8 as it said to do, but brings me right to the error screen.  I'm stuck, there is nothing that I can do, and I need this computer to work tomorrow.

  Another interesting note is that the recovery on the installation CD tool identifies my system installed Windows Vista... wtf.

  Help?

  I don't know if this post will solve your problem, but it can give you new ideas or angles to try.

  http://www.lifeworldblog.com/computers/Windows-7/Windows-cannot-verify-the-digital-signature-for-Winload-exe

• In my report of diagnostic systems that it establishes that there is an error indicating the symptom is "device is not working properly." Windows cannot load the required device drivers. "I don't know what to do.

  Windows cannot load the required device drivers.  It shows the details like Microsoft ISATAP adapter reports "tv_ConfigMgrErr31.  This device won't be available until the problem is resolved.  The Plug-and-Play ID is 17.  What this mean and how can I make the correction of this error and operate?

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  Y at - it no devices work not?

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot delete the data and source ERPI loading system rules 11.1.1.3

  Hello

  I am trying to remove the source system screen ERPI in the workspace (what of more, we use in our application UAT), but it throws to up and say error message "could not delete the Source System. There are Applications associated with this Source system targets. Please remove all associated target Applications. »

  I tried to delete the data load rules, but are all not valid and deletion icon (trash) is disabled.

  Can someone help me how to clean these invalid instances?

  Version: 11.1.1.3

  Thank you

  Jehanne

  Figured out, remove the application of "Target Application Registartion" and your rules of metadata and loading data are deleted.

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded