Pass arguments (Parameters) of the data form for HBR

Similar Questions

• data form for the opening of the conversion rate

  Hello
  I am trying to create a data form for entry of conversion rates. For example in the given line below, I want to create a data form to convert USD to euro and I want to enter into 1.05742 via the data form. I do not know how to select USD and EUR custom 1 and custom 2 members. where can I see this option?
  
  Actual spending; 2005; January; Periodic report; [None]; [None]; AverageRate; [ICP no]; USD; EUR; [None]; [None]; 1.05742
  
  I'm new to HFM and any help will be appreciated.
  
  
  Thank you

  This looks good to me. C1 will be USD and C2 will be EUR entity will be [none]. Choose USD and EUR in C1 and C2, make sure to change the 'Selector' drop-down list on the form of "currency".

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• a problem in passing multiple values in the loop settings for

  Hi all
  
  I am facing a problem in passing multiple values in the loop settings for.
  
  
  EX:
  
  CREATE or REPLACE PROCEDURE (pr_id OUT NUMBER) HAVE
  
  
  tab type is table of NUMBER;
  
  TEMP_TAB TAB;
  
  BEGIN
  
  Select the COLLECT LOOSE pr temp_tab pr_id;
  
  I'm in 1.TEMP_TAB. loop of COUNTING
  
  PR_ID: = temp_tab (i);
  
  end loop;
  
  END TEST;
  
  OUTPUT:-
  
  pr_id = 234578
  
  
  in the example above, I'm only a value as an out parameter. but I send you PR_ID of the loop.
  why I don't get all the values that the parameters.please offer a solution for me.
  
  Thank you my friend.

  More clarification, let's look at your code...

  -- create a procedure and have a single numeric out variable
  CREATE OR REPLACE PROCEDURE TEST ( pr_id OUT NUMBER ) AS
    -- declare a type as an array of numbers
    type tab is table of NUMBER;
    -- declare a varianble of that array type
    TEMP_TAB TAB;
  BEGIN
    -- query all the values from the table into the array
    select pr_id BULK COLLECT INTO temp_tab from pr;
    -- loop through each value in the array
    for i in 1..TEMP_TAB.COUNT loop
      -- set the value of the single OUT parameter, OVERWRITING any previous value it has
      PR_ID := temp_tab(i);
      -- loop around to the next value
    end loop;
    -- end the procedure with the final value of PR_ID
  END TEST;
  

• How can I re - attach the data files for the programs?

  Original title:

  reconnection of the files

  BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?

  Hello

  You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.

  Otherwise:

  "Changing programs by default by using Set Program Access and defaults of the computer"

  http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7

  "How to change file Associations in Windows 7 and Windows 8.

  http://www.7tutorials.com/how-associate-file-type-or-protocol-program

  See you soon.

• Use the stored procedure to create the data model for the bi publisher report

  Hi all
  
  Can we use stored procedure to create the data model for BI Publisher reports? I did find an example by using the stored procedure to complete the data model in the bi publisher report.
  
  Thank you
  
  Virat

  Check out these links

  BI publisher to use the stored procedure
  Re: Stored procedures and dynamic columns
  Re: Is it possible to use stored procedures in BI Publisher GUI?
  Re: PL/SQL stored w / model XML?

  If brand pls help

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• Unable to see the data as a percentage on the data form

  Hello
  
  I'm unable to see the data on the data form 10% but consider 0.10
  
  I created a few accounts hypothesis saved in the dimension of accounts with the data type %. I wonder what goes wrong?
  
  I have the columns 'Account' scenario, one custom dimension and lines I 'legal entity' and I expect to see the % of the form data, but without success.
  Wonder what goes wrong?
  
  This is version 11.1.2
  
  Ravi

  If it is a classic application, you will need to return to the Administration > Manage > Dimensions and click on the order of evaluation, move accounts in the left pane in the right pane and apply, try the forms.
  If it is an application of EPMA have a read of:-http://download.oracle.com/docs/cd/E17236_01/epm.1112/epma_admin/epma_data_type_eval.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• "Deploy the data model for LCD screens" period

  Hello

  My Jboss is time-consuming while deploying the data model for LCD screens and it's initially Flash Builder 4 to display the error "Read Timed" out. How can I increase this timeout value?

  Thank you

  Houda

  Hello

  Please follow the steps below and see if it helps:

  1. in your Flash Builder click on the item in window menu, click on Preferences

  2. in the Preferences window, select Adobe-> RDS configuration

  3. Select your configured server and change/set Timeout

  I hope this helps.

• Calculate the fastest path between 2 nodes with the data model for the Oracle network

  Hi all,
  
  I have Oracle 10 g 2.
  
  My problem is the following:
  
  I created a network named ITALIA_NET in the data model for the Oracle network.
  The table of links of this network is named: ITALIA_NET_LINK$.
  The table of the nodes of this network is named: ITALIA_NET_NODE$.
  
  The table ITALIA_NET_LINK$ contains a field named COST that contains links (in meters) lengths.
  
  I've already calculated the SHORTEST PATH between two nodes of the network, by using the method of shortestPath() (using the Java API) as shown on "Pro Oracle Spatial for Oracle Database 11 g" manual. Infact, this method makes reference to the COST field for $ ITALIA_NET_LINK to make this calculation.
  
  Now, I want to calculate the FASTER PATH between two nodes of the network. I have the links (in hours) travel time to make this calculation.
  
  My idea is to create a new field in ITALIA_NET_LINK$ named Cost2 containing the travel time from the links and then do the math by using the shorthestPath() method, referring to the Cost2 field to $ ITALIA_NET_LINK COST field instead.
  By default, I know that the shorthestPath() method returns the COST field for $ ITALIA_NET_LINK. Is possible to change this setting and do that this method refers to the Cost2 field?
  
  In the alternative, is another way for the calculation of the fastest way?
  I want to leave the creation of another network as last solution, because I will have other costs of field (Cost3, cos4t,...)
  
  Thank you much in advance.

  Your approach is good. You will have two networks and you can read them in memory and analyze of shortest path. The shortestPath method is static for the class of NetworkManager. You can use the same method for both networks, once they are read into memory.

  ...
  read the network with time as cost of link
  NetTime network = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_TIME');
  read the network length as cost of link
  Network netLength = NetworkManager.readNetwork (dbConnection, 'ITALIA_NET_LENGTH');

  calculate the quickest way
  PathTime path = NetworkManager.shortestPath (netTime, startNodeID, endNodeID);
  calculate the shortest path
  PathLength path = NetworkManager.shortestPath (netLength, startNodeID, endNodeID);
  ...

  In the future, if you upgrade to 11g, network data model provides a load on demand (LOD) API that loads only the scores of necessary network in memory during the analysis. This command removes the restriction of the memory of the 10g (in memory API you use) API. API of LOD can handle very large networks and offers more features analysis and modeling capabilities.

  The following link contains the tutorial of NDM LOD API ready for download. Just for your information.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  Kind regards
  Jack

• PHP Beginner: can the data values for the DW effect Html on pages form?

  I'm working on the creation of data form effect HTML pages, but I don't know how to run the whole thing. I have a php document, and I filled in a drop-down list with the names and the values I would like to be placed in a HTML page.  Oh I also was wondering on the forum code snippets are they copyrighted or anyone can use them?

  Dreamweaver has a lot of support for PHP, including a set of server behaviors to accelerate the development of Web sites that use a MySQL database. It also has a lot of code hints PHP (more than 2,000) and syntax coloring. So, Yes, Dreamweaver can help you work with PHP, but you need a solid knowledge of HTML, as well as a knowledge of the basics of PHP and SQL before you start.

  PHP is a language side server that processes the content of a web page on the server before sending the output as HTML in the browser. Unless your server is configured to manage HTML as PHP pages (most are not, and it is not recommended in any case), you must save the pages with a .php file name extension to use PHP.

  Data entered in a form can be used to assign the production on other pages. To give a very simple example, if a form contains a text called 'username' field, the value in this field can be displayed using a PHP variable. If the form is submitted using the POST method, you view the value in the page like this:

  Welcome, !
  

  This is a deliberately simple example; and in practice, you have to filter the value of the shape to make sure leave you vulnerable to multisite by scripts.

  If you want to start using PHP in Dreamweaver, I recommend that you take the time to learn the basics of PHP before using it in web pages. The PHP online documentation is very good, and it includes a simple tutorial. However, you might find that tried to browse through the documentation on your way your own is a little like trying to swallow a dictionary. This is more than a reference to a learning tool. There are a lot of PHP tutorials on the web, but many of them are old and do not necessarily follow best practices.

  If you want to learn more about PHP in a context of Dreamweaver, you may be interested in my books (more details on my Web site at http://foundationphp.com/).

  Finally, your question on copyright law. Copyright of the code remains with the person who wrote it, but any code posted in these forums is free to use, unless otherwise stated (but no one should view code here they don't want others to use). It goes the same for code in my books. It is there for you to learn and use freely in your own projects.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Conservation of data form for later use

  Hello, all,.

  I know that this question is not really belong here, but the general development forum is dead (I already asked a question-no answer), and users more intelligent that I interact with are in this forum, in any case.  So, please forgive the audacity to ask this question here and please do not move to another jurisdiction.

  I was responsible for establishing a form so that a user can check a checkbox that will save the form for reuse later.  The user can give it a name, and it will appear in a menu drop-down SELECT future visits.

  What I have in mind (and I did, so far) is to use jQuery.serializeArray () and JSON.stringify () to save form fields and string data in a column of a database table.  So far so good.

  However, on chain of such recovery, displaying in the browser and using JSON.parse () to turn this data into an object, I am facing some real difficulties in filling the data in the form.

  The code I have, so far, is not that I am working on the form - I created a dummy form just to get this code works and it will transfer to the form of production as soon as I have this job.

  I'll try to get the code of my dev environment (isolated from the internet) to power post it here.  I'll be right back.  (If I'm sitting here, the session will expire before I hit the 'Post' button on this message.)

  V/r,

  ^_^

  Select form elements is an attribute of type.  So, try to get this attribute would fail.  What I would do, is to add a data attribute to all fields to store the type.

  then update your code to get the field...

  var frminpt = datab [j], $el = $("[nom =" + frminpt.name + "]"), type = $el.data ('type'); Alert (frminpt.name + "is" + type)

  HTH,

  -Dave

• I try to run CC in a new computer products (the third argument: one of the two former stole) but I can't

  I try to run CC in a new computer product (the third argument: flew one of the two former) but I can not: when it asks me to try again or close the session on the other, I click on "continue", but nothing happens. What can I do? Thanks for any help on this matter.

  When you are prompted to sign out of your other two computers, do.

• The data forms Web site - how to display the dimensions of all the columns?

  Hello
  
  I'm working on a data form. I took accounts in lines and period, year and scenario in my columns. The first pass is displayed correctly-> P #JAN. Y#@CUR. S #ACTUAL
  But when I used the second col-> P #FEB. Y#@CUR. S #ACTUAL and save my data form. I can see the year and only col1 scenario dimension. Col2: Only FEB appears without year and scenario. How can I spread the year and the other columns scenario, rather than display only in col1. Your help will be greatly appreciated. Thank you.

  If you use the standard Web in the workspace form tool, you can bring up the form in edit mode, select the Details tab and there is an option "Repeat the headers", Just check the box and you should be good to go.

  JOINT TASK FORCE