Pass property nodes / / Activation/deactivation to the off position

Similar Questions

• Hello, I need help.  in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Hello, I need help. in photoshop / editing / color / color / RGB management rules, it is impossible to change this point. Is in the "off" position and I would choose "preserve embedded profiles' I'm on windows 8 and creative cloud for photoshop.

  Policies automatically goes to "off" If you have your screen as working RGB profile - what is something that you should never do. Always have a standard space like RGB work.

  And Yes, "preserve embedded profiles" is the only sensitive parameter. Others are best for special purposes where you really know what you are doing - at worst they will transform your archive in a unrecoverable mess.

  

• N200 registration / activation / deactivation of the internal & external microphone

  Hi 3000 N200 support

  I accidentally turned off/disabled the device Microphone internal / external.

  Unfortunately, now I'm not able to activate / reactivate the microphone device.

  Please, help me to reactivate the device internal microphone / external.

  When I open the control panel-> Sound-> record (tab), everything is "grayed out".

  and it says no audio device is installed.

  I guess it's Realtek High Definition Audio device driver 6.0.1.5391 version.

  Thanks in advance

  Carsten

  Under Windows Vista

  If you have accidentally disabled the device interanal external microphone, you should try to go to Contral Panel > hardware and audio > Sound > recording.

  Right-click on an empty area, and then check the "show disabled devices". Activate the internal microphone / external device you want.

• Change the graph of mulit-field in front of Subvi - property node does not accept the cluster

  Hello

  I try to make a graph of multi-terrain waveform on the façade of a under VI.  I have created a command reference and fed in a cluster to sub - VI.  When I try to connect to a cluster of data for the façade, I get a broken wire:

  

  Can someone tell me what I am doing wrong?

  Thank you

  If you want the chart to accept a cluster in the Subvi, son first a cluster in the main VI in the table and then re-create the reference.

• problem with the activation/deactivation of the form field

  Hello, I tried to find and use various methods to turn a group of radio form html with javascript, but nothing seems to work good for me.
  < td width = "60" >
  < input type = "radio" name = "status" id = 'status' disabled = "disabled" value = "" < cfif #getfollowups.finalized # NEQ "YES" > verified < / cfif > >
  < table >
  < td >
  < input name = "status" type = "radio" id = 'State' disabled = "disabled" value = "YES" < cfif #getfollowups.finalized # EQ "YES" > verified < / cfif > >
  < table >
  
  What is the method of using javascript to activate these? Thank you.

  http://www.irt.org/script/1712.htm

• Ringtone continues gushing back to the off position

  All seen this?

  The switch that activates the ring is permanently off. When I try to turn on, it is clear. Didn't even know that it was spring loaded. Y at - it a setting of software that can create this State?

  Thank you very much.

  Are you talking about the switch on the upper left side?  If so, you have a hardware problem.  You ned to contact Apple.

• Hang objects - seems to be in the off position

  Hello

  I have CS6.

  After returning from vacation, it's my nod to the functionality of objects and "green lines" (something I do somehow... who knows) are disabled. This is when an object is close to the line of another object that he used to snap / click in place, instead of going me through the manual line upward on zoom-in super.

  Does anyone know how to reactivate it?

  In addition, I was never able to align themselves on the margins, this another feature I turn on?

  To get your green rear lines ("guides intelligent"): Ctrl-U (or Cmd - U on a Mac)

  To align with the margins: view > grids & Guides > snap to guides.

  Ariel

• How to set the property node maximum xscale for several scale XY Chart

  Hello

  I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.

  What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.

  So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?

  Thank you for your help, any suggestions are appreciated!

  Hello

  After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.

  This solved my problem.

  I hope someone else can save themselves a few hours with this thread!

  Thank you

• The property node reference

  Hello guys,.

  Using the property node, I confused with the terminal of reference there. Can we establish a special reference to the control (button, for example), but obviouly I couldn't connect the button directly to the point of reference. I find an example about which attached in attachment. How can I creat something like that? So enjoy!

  Phyyu,

  VI server references follow the structure of object-oriented class. A VI server reference can refer to a wide range of objects, such as a control, etc. variable indicator, VI. Server of VI References can be as strict or not strictly typed as you wish. A control/light specifically made reference refers to a command that you pass to it. You can request to be more rigorous by right clicking on the reference, and using menus to select the class that you want to reference. A tree of possible class might look like this: Server VI > generic > G object > control > Array. Now this reference requires a pointer to a table control and will not accept any other type of control. If you use this reference control to create a property node, the properties will be specific to the array class.

  A refnum is simply a numeric value that refers to a place in memory. Reference and refnum are used somewhat interchangeably in LabVIEW.

  I hope that answers your questions! See the help files of LabVIEW for VI server references to learn more about them.

  Kind regards

  Alexandra Valiton

  Technical sales engineer

  National Instruments

• Class property node information not stored in the class file

  Hello

  did happen to you that you add a property (accessor get/set of an attribute) in a class node, Save the project, move the project to another location and it open and that the property node is missing in the project, although that the file VI is there in the file system? Unfortunately, it causes other screws using the property node is broken after moving the project to new place.

  The class file is some sort of XML and I checked: property node information is missing indeed, that seems to be lost when you save the project to the original location.

  Any idea?

  Peter

  Peter,

  If the content about the VI for the property URL is indeed missing in the file lvclass, it should not be a problem of relatively/absolute path.

  So what I want to know to clear:

  -PC 1 is used to develop the project, including the class (file lvclass and a few screws). You save the project using project explore everything back up?

  -Then you copy EVERYTHING used in the project manually to 2 PC (a unique project directory?).

  -Open the copy on the new machine shows the issue: the lvclass file does not include the entry for the node property accessor get/set screw option, but the screws are in the space provided (in the project folder).

  Is this correct?

  If so, the file lvclass on PC 1 contains about property nodes?

  If the parameter is there, please compare the original file and the copy of the timestamp and size. It seems that the lvclass file is not copied correctly.

  If the parameter is missing on 1 PC, the question must also be enabled on the developer's computer. When you try to save the lvclass file: it overwrites the file and create a new stamp/size for her?

  Otherwise, wait for the lvclass file to be write protected...

  Norbert

  EDIT: We're talking marked yellow question type, do we?

  

• The XY graph Plot.LineWidth Property node problem

  Hello!

  I have a loop, where I repeatedly putting curves in a XY Chart. In the first iteration of the loop, after the first corner appears on the graph (I send data from the graphical indicator), I use a Plot.LineWidth Property node to align the thicker. However, in the next iteration, when the second plotted curve appears on the graph, and the property node is pulled again, the second curve remains thin. I guess what I've done wrong, that this property node defines only the first curve? How can I set the width of the line of all the curves of the XY graph on the same value? When I directly on the properties of XY graph, I can set the width of the curve, but only one by one...

  Suggestions how set the widths of the ground on a specific chart XY?

  Thank you!

  If it is a multiplot XY, you must set each plots properties by using the property activeplot (index of the new lot), then by setting the thickness.

• Activation deactivation iCloud, photo sharing

  On my iPhone I have iCloud library & My Photo off steam but iCloud Photo Sharing turned on.  To be honest, I don't know how iCloud Photo Sharing turned on - I do not use it.  I would like to disable now iCloud, photo sharing and return to the way it was with my own storage original iPhone.  When I go to disable the button from iCloud on my iPhone photo sharing it says that it will remove pictures of Commons of my camera (which is now all the photos I have on my iPhone).  My question is, is this really the case? Can't I just go back to the way (I think) is on the device before icloud, photo sharing has been enabled?

  It must just be better worded. It references only the shared albums as separate from your actual film association. It removes nothing of your camera by activating / deactivating it turned off.

• [] DisabledItems property node

  Hello

  I use a couple of controls of the ring to allow the user to my GUI to make certain choices.  I want the options available in a ring of control depend on the selection made using it.  I do this using the [] DisabledItems property node.

  See the attached example.  The selection is made by using the 'Commission' control affects items that are disabled in the "Image Type" control.  However, it is still possible for the user to select an invalid option (which would cause significant dysfunction of the overall GUI) indirectly.

  For example, in the attached VI, select 'CBS' in control of "Board", then select "Initial start-up" in control "Type of Image.  Then change the jury selected in "ACB".  The type of image remains as "Initial Boot" (although gray)-a scenario that is not allowed.

  Is it possible to prevent the disabled items in remaining selected?  Otherwise, is it possible to report when a disabled element is selected, so that the user can be prompted to change their choice?

  Any advice greatly appreciated.

  Dan

  I find that the Structure of event helps out a lot in situations like this.  See my attached VI... in the case of change of value for the control of the Board of Directors, I see if the current Type of the Image is one of the newly disabled... and if so, I change its value (in my case simple, I put it to "Operational" since this seems to be a correct value for all types of room).  I hope this helps...

• Graphic property node indicator position

  Hello! I have several graphic indicators and I want them to appear on certain positions, so I created property nodes where I define their exact position. I have a tab control in my design to separate the 2 pages front and the problem is that indicators are displayed on both pages. I want them to appear only on one page, how do I solve this problem?

  Thank you for your time.

  Hi cocopa.

  On the front panel, if you drag the graphical indicator in the appropriate page then it should stay there. If the graphical indicator has a shadow, it is on the top of the tab rather than inside a page control. In the block diagram, you must have a business controlled by the tab control structure. When you want to adjust the graphic position, have the indicator and the property node in the box to the right page. That should allow you to move the chart inside your tab control page.

  Kind regards

  Daniel H.

• LabVIEW 7.1 IVI - C Wrappers and VISA property node do not work together?

  Hello world

  I want to use the property node VISA with LabVIEW 7.1 Wrapper of two companies different well known instrument, Rodhe-Schwarz and Agilent Technologies.
  The two companies releasead their IVI - C for NI LabVIEW 7.1 drivers version NI Instrument Driver network and they are ready to be installed and used.

  I found a bug manifested that the LabVIEW 7.1 version that the bug is not present in whhen versions 8.0 LabVIEW or LabVIEW 8.6 than these IVI LabVIEW of LabVIEW 7.1 wrappers are used.

  Everyone could exeperience this bug if they have LabVIEW 7.1 installed and are trying to use the version of LabVIEW 7.1 of these wrappers which are published in NI Instrument Driver Network under the links below.

  Agilent ag81150ni IVI Driver for LabVIEW 7.1 install from here. Used in simulation that by definition simulate = 1

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=55798957B1A633BDE0440003BA7CCD...

  Rodhe Schwarz rsngpt IVI Driver for LabVIEW 7.1 install from here. Used in simulation that by definition simulate = 1

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E91D6659CE034080020E748...

  After the installation of these two complete drivers close LabVIEW 7.1, if it was open, and then restart LabVIEW 7.1. You can see two new ready to be used as LabVIEW 7.1 IVI drivers in the LabVIEW Instrument Driver pallet wrappers in a LabVIEW 7.1 VI test.

  Open a new white VI and of the use of the Instrument Driver Palette two VI known, initialized with Options.vi and Close.vi adding them on the block diagram, connect all THMs. Accept all default settings except simulate parameter which must be defined as = 1 simulation.

  The two VI run OK mode of simulation without errors.

  Now select a property in the advanced Panel of VISA node and press this node between 'Initialize them with Options' and 'Close' VI and make all necessary in-out connections and error.

  Run these two simple screws of simulation

  1. When I run pilot Rodhe Schwarz IVI the property node going OK until the end. No error
  2. Whne I run Agilent IVI driver the property node is always out of the error Code 7.

  Question is why they behave different with regard to the property of node when it is used with the LabVIEW 7.1 envelopes? BTW, the failing VI of wrappers Agilent LabVIEW 7.1 works very well in labVIEW 8.0 and 8.6. That means that this problem is limited only the version of LabVIEW 7.1.

  I posted the same question on the set of LabVIEW and nobody chose their interest in there so I decided to post here. As this question is also linked to IVI, VISA drivers, it is possible the person of this group to get a clue about this annoying behavior.

  I've attached screenshots of the PNG files that show the difference of different behavior of VISA property between these two drivers node.

  ScreenTestShots.zip (152 kb)

  Thank you

  Sorin