pass simple to easily save URL
Hello.
I have hp sleekbook envy6-1090, I have formatted my pc and I lost a programe called simple pass, I want to save and recall different URLS by clicking ctrl + number please helpe me reinstule it (is not simple col fore digital footprint certified)
What about parasites >
khjawabrah
I'm glad I could be of service. It's not too much to ask, could you mark my posts with congratulations and accepted Solution to show that I helped you? It would be very appreciated
If you have any other questions, feel free to ask!
Mario
Tags: Notebooks
Similar Questions
-
It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.
I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.
What alternative should I solve the problem?
Find a possible solution:
-Press ESC to HP connection icon
-Choose F11 and follow the instructions to start Windows in safe mode
You can then use the system restore to solve the problem.
-
My pass simple hp on my hp dm4 3000ex does not work after update of windows 7 this as I do about this problem?
jzamudio
Rules on "Order of Events.
- Install first driver - restart
- Install the following software
Go to the website of your computer.
- Download Driver validity sensor (category - keyboard, mouse...)
- Download SimplePass (category - security)
Driver & Software Downloads - HP Pavilion dm4-3000ex
Install the DRIVER FIRST validity - RESTART the computer and log in
Install the software SimplePass next - configure the software, and then restart the system, sign in.
-------------------------------------------------------------------------------------------------------------------------------------------------
If you wish, you can then download and install the latest version of the HP SimplePass of AuthenTec software.
SimplePass HPLite32_build_5.4.0.620
EC * 620 version can be installed on top of the previous version.
=====================================================================================
Before installing the latest version, at any TIME after making changes in SimplePass...
You should backup / EXPORT the webcard password database:
Export the Webcard database:
If you have working software SimplePass, export your Webcards before proceeding. In the case where you must remove the SimplePass software, your webcard backup can be used (imported) to restore your Web site login information.
Start SimplePass > parameters > export NOTE: file will be called *.tsd
====================================================================================
Later:
Whenever you make changes, you can expect the softwware to complain. One way around this problem is to go to programs, right-click on the SimplePass software and click on repair. This reinstalls the software without destroying the existing database Simple and solves many problems. Restart after the "repair".
=====================================================================================
A note more...
When the driver free...
You can go into your device manager > biometric devices > right click on your driver of validity, and then uninstall it. When you restart, reinstall the driver.
=====================================================================================
-
Fingerprint Reader not working - how to set the pass simple hpenvy?
Hello. I want to ask you how to set the pass simple hpenvy. Because my fingerprint was not detected. What should I do and how do to reset that? Thank you. God bless you
Hello
See the article:
A (Windows 8) fingerprint reader troubleshootinghttp://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&docName=c03718240
Note: Article also contains measures to make changes in the BIOS. I suggest that you
Contact HP support before making any change in the BIOS.
See also: using HP SimplePass Fingerprint Reader (Windows 8)
http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&docName=c03653209Hope this information helps.
-
Problem by passing the values in the url
Hai...
I have created a report region1, because I change the link to change the values, after clicking on the edit link region.2 will appear, im passing in the url of the region.2. My problem is that the values of a ': ' in that... so by passing the values in the url im not getting the onlu 'Region.2' for values that got ':' in it... How can I overcome the issue.
im passing value contains ':' in this example:-"petroleum products: Europe.
When I pass this URL im get like this
http://nypploratest.Platts.McGraw-Hill.com:7777 / pls/dews/f? p = 100:105:1304192021604971:NO:P105_NEWS_CODE,
P105_NEWS_DESCRIPTION, P105_NEWS_CODE_HIDDEN:PDD % 2COil % 20Products: % 20Europe, 2-1 colon is included in the url
Please help me...
Thank you
DavidYes, it's possible. Depends on what you are doing. Source value of the element can be a query, so if you have spent the value PK of a line in a table to the page, then the query source of this element could extract the line using this key and use the text value retrieved from another column to fill the text element.
Scott
-
23 - g013w: passes simple
I have simple pass on my computer and I like the concept, BUT when I read a page or just to think about what I read in as a minute my screen turns off and simple pass appears and I have to continue to put in my pass, I need to know is, if there is a way to do a long time before the screen turns off and the simple pass pop off. I managed to change my sleep 10 minute thing, but it doesn't seem to affect simple pass, now I can remember even how I changed that. None of my children are familiar with windows 10 enough to help me over the phone. Please keep in mind, I'm not too familiar with many terms that are used today, so if you could, please tell exactly what buttons to push to get to where ever I need to change the time on my simple pass. I hope someone out there can help you because I'm computer most of my entrepreneurial friends and they rely on me to help them. Thank you in advance.
Hello
The first thing I would check is the following.
Right-click on an empty area of the desktop and select Personalize.
In the next window, select the themes in the left pane, then theme settings link.
In the next window, select the screen saver link to the lower right.
In the screen saver settings window, you can adjust the time before the screensaver kicks in the menu drop-down 'Wait' and Remove the tick in the box next to "in»the logon screen curriculum vitae Click on apply, then Ok to save the change of the parameter.
Kind regards
DP - K
-
Leak memory in a simple loop to save data in the table?
Hello world
I'm trying to set up a simple code to read a certain amount of data in a table at a fixed sampling rate and put these data in a local variable. I'll put this on one OR cRIO-9073 using the scanning engine and the data comes from one NOR 9208 with a speed of approximately 250 Hz scanning, even if it is not really important at the moment.
I made this little test VI which I suspect contains a memory leak, but I'm not able to identify it. The reason for my suspicion is that when I run the vi on a VMWare virtual machine (LabVIEW 2010 on Windows XP) it claims soon that it is short-term memory. Of course, the problem is perhaps elsewhere, but I hope that someone more experienced with LabVIEW programming will be able to find all the bugs very easily because it is really a piece very simpel to code. :-)
I have included a copy of the VI with a screenshot to illustrate.
Regards, Martin
PS my code looks a bit awkward, so if anyone has a better solution, I'd be very happy to learn about it!
Hello Martin,
I would try a different approach to your problem. Currently you reshape your table each iteration of the loop. This means that the allocator memory of LV must find a new piece of contiguous memory each iteration of the loop. You're probably fragment your memory and so short of contiguous blocks of memory, leading to the release of messages from memory.
For these types of tasks, I recommend having an array of fixed size that you initialize outside the loop and then use the Replace table subset in the loop for updating the values. This avoids the problem of allocating memory you use in.
Alternatively, since I assume that you use the local variable to pass data to another loop, you can use a FIFO RT to manage data. A RT FIFO resembles a queue of LV, but it is designed so that you can keep determinism in your application. Set up an acquisition loop that exports data from the 9208 every 4ms in a RT FIFO. Then set up your processing loop to run at a slower pace - say every 200ms. The processing loop reads all the elements of the FIFO until it is empty every 200ms or a number of samples. The RT FIFO is fixed size, if you need to make it large enough to contain at least 200/4 = 50 samples. For more security, you should do several times bigger, maybe 200 samples. You can try different sizes of the FIFO and also to the different periods of your processing loop to your application's specifications.
Using this method you do not have to create a counter to track items, since the reading of FIFO function can tell you how many items is in the FIFO and also when it is empty.
I recommend you the example of Communication of FIFO of RT which comes with LabVIEW to get an idea of how to use these functions.
Gerardo
-
Pass simple don't connect screen locked HP DV6 P 605ea
Hello
I've been running Simple pass Windows 8.1 on my HP Pavilion DV6 6053ea for a while now and only in the last few days it has stopped working properly. It won't let me through the lock screen.
I don't want to enter a password every time win 8.1 starts so I disabled who. When the screen saver is on to the lock screen, if I slide my finger that I get a white light but it won't unlock but I can easy to use the mouse to move the drop to the bottom of the screen of the road and it brings back me in the deskop. Now if I press the WINDOWS and L and pass my finger it will bring me to the deskop...
What is going on? I would like to SimplePass recognize my finger when the phone is locked.
Hello
That would be the way that software is designed to work.
"A fingerprint reader is a safety device that uses a scanned image of your fingerprint to authenticate your identity. With the security of fingerprint software you can connect to the applications and secure Web sites by scanning your fingerprint instead of typing your user name and password on the keyboard. -
Pass simple - how to remove the conservation task bar it turned on?
Hello
I own a HP Pavilion DV6 6053ea and I had a few problems with simple pass. Before I installed it and it stuck on the taskbar in Windows 8. Someone gave me a new update of the driver that has removed from the bar spots.
For some time he acted a little (my fingerprint reader would take several swipes before he woke up) and I have installed the latest version of the driver HPLite32_build_6.0.100.252. It is not like I plan to work.
Anyway, he's back in the task bar and I would like to remove it. Also the fingerprint reader is off most of the time and allows quick access very slow. How can I solve these two problems?
The question might be one driver / software incompatibility. In the past, when this happened, the software would simply "does not work". I don't know where you came, that is the value which SimplePass version you were before and what validity driver version you have - the fact is that in this most recent version, there may be an error of "lesser" tangle, but not to destroy the facility. ???
For Windows 8
sp58900 validity sensor V4.4.234.0 Win8
sp58540 HP SimplePass V6.0.100.244 Win7-8
The above is an example of the 'Windows 8' and configured software SimplePass pilot that is currently in use on a large number of mobile phones. Note the version number similar to the SimplePass to your own version.
If your driver version of validity is late, in other words, if the driver that you have on your computer is OLDER one pictured here, then I suggest you download and update this driver (as shown). You are likely to have a better "match".
Next: It is highly unlikely, but you can also check to make sure that you have not inadvertently your driver to "allow the computer to turn off this device to save power".
Of your Deskop:
Control Panel > display icon > device management > biometric devices >
Validity Sensor right click > Properties >
Power management > make sure the box "allow the computer to turn off device" is DISABLED
When you make changes to SimplePass, expect not to complain (work stoppage). When you look at it, not expect to stop working...General rules for success:
- Installing the driver FIRST, RESTART
- Install / repair software second, setting up the bases... Reset.
======================================================================================
First of all, before EVERYTHING CHANGES, make a copy of your Webcards. The Webcards are similar to your 'Favorites' for your websites with passwords SimplePass attached. You should make periodic backups and always before making changes or try to repair the SimplePass software.
Export the Webcard database:
If you have working software SimplePass, export your Webcards before proceeding. In the case where you must remove the SimplePass software, your webcard backup can be used (imported) to restore your Web site login information.
Start SimplePass > settings > Export
NOTE: File will be called *.tsd
Don't forget to perform backups periodicals webcard when you change passwords and / or add Web sites!
=======================================================================================
To reset / repair software without deleting:
Fix SImplePass software:
Control Panel > programs and features >
Looking for this program:
Click on HP SimplePass
Select "repair".- After "fix it", RESTART / REBOOT your computer
===================================================================================
Remove it from the taskbar in Windows 8:
- You should be able to go to the new startup window,
- find the tile for SimplePass, right click on it,
- and then pull it out of the new taskbar.
If it is stuck, it can take a bit more work... the 'repair' above for the progam can help - try it if the simple "right click and delete" does not get this out of the way.
I hope this helps!
-
Can you help me I have some problems with my simple pass hp I just can't find the right extension for chrome
I remove internet Explorer because I only use google chrome when I put new passwords in simple pass that it does not open
Can you help me?
GRTS Tom
Hi Tom,
Welcome to the HP Forum!
You know... as much as you might regret using Internet Explorer, you could leave it on the computer as a failsafe browser. You can delete the desktop shortcut if you do not have to watch.
OK - Chrome will work with SimplePass, as long as you use the latest version of HP SimplePass.
When the SkyDrive opens, locate and open the file called:
Chrome and HP SimplePass V6.0.100.276 fix
Finally, you could benefit from the following:
Set default programs - File Associations
The value as much as you can without Chrome. Note that some options may be available through IE, hense the idea of having the browser on the system where it is necessary for one or more applications later.
Good luck!
Click on the star of congratulations !
It's a big 'thanks' for Experts who offer to help!
-
Fingerprint reader simple Pass stopped working. I used to be greeted by a flashing LED drive. That no nonger can't. Suggestions for the restoration of the features, please.
HI @vdolcourt,
Thank you for your query.
I seized you fingerprint reader was working fine but suddenly stopped.
You did it all change hardware or software because he worked? You did all your Windows updates?
You have the last validity sensor driver installed. The HP Support Assistant can help you in this process. Here is a link for HP Notebook PCs - troubleshooting a (Windows 8) fingerprint reader. The steps should be the same for Windows 10. Have you tried uninstalling and reinstalling the driver?
Looking forward to your update.
-
How to download pass Simple HP 2012
Model: HP Pavilion dv3500
No. FW721EA #ABU
Operating system: Windows7 Ultimate 64 bit
I downloaded UPEK Protector Suite, but I can't use my fingerprint reader. It is said was unable to open. I think that HP simple pass is the right software/driver for my HP DV3500ea. Can someone help me please! Thank you.
Amadz,
Your computer uses older security Digital Persona software. This is similar to the SimplePass software, a little more code and it works a little differently, but it does not work and it was written to run on the hardware in your computer.
The trick is to install the firstDRIVER, restart the computer.
then , install the software.
Go to the website of your computer:
Software downloads & Driver - HP Pavilion dv3505ea notebook PC
Click driver - keyboard, mouse and input devices
Select and download the "validity of fingerprints fingerprint driver' for your computer
Click software -Security
Select and download the software "Digital Persona"
- The installation files will be will probably ask in your downloads folder.
===================================================================================
- First install the DRIVER
- Reboot / restart the computer and log in
- Then, install the Digital Persona software
- Set up the basics of the software
- Update of the software
- Complete with configurations as you wish
Update software Persona digital Version 4.01 to 4.11.x
- There is an update in addition to D Persona digital. You will be able to update from within the 4.11.x program once the 4.0.1 version is installed on your computer and put in place.
- Open Ddigital Persona 4.01, all the bases to put in place: enter your windows password. Register for fingerprint (s)...
- Then, while DP is open, select / go to the ' "Get latest backups".
- Click 'Search now software updates' and let him go get the update. Click to install the update.
- It comes to update one (available from Digital Persona on the Internet); This update allows you to get up to version 4.11.x
- Once you have completed the update to 4.11.x, that's all: no more up-to-date as possible.
- If you have one, bring your last backup of your *. DPXD password file.
NOTE: This UPDATE should work - this is a pretty old software; the old link to the update may still be valid. If the update no longer works, know that you run what you have.
On the. File DPXD of password:
It is a password backup / export file you do once you have the software of DP of work implemented. You should do one of them from time to time - the backup is like your 'bookmarks', except that it has passwords attached to it.
Export the data base DP / make a backup:
Start/Open Digital Persona > scan your fingerprint to open > online accounts > Manage >
See import and export > Select export
> Export data online from this computer account >
Scan your fingerprint > type your password >
Navigate to your folder selected > type a name > Finish
Protect the export file. Re-export on a regular basis. If you need to reinstall your software, you will be able to use that file to restore your passwords.
=====================================================================================
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
See a Post that is useful - or who teaches you something you didn't know?
See something that makes you smile?
Click on the star of congratulations! It is a nice 'Thank You' for the author.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-
Navigation after passing parameters to ADF via URL
How you exit a page after passing parameters via a url as in the method in this link https://blogs.oracle.com/shay/entry/passing_parameters_to_adf_appl?
I tried to drop this delimited task flow on adfc-config and adding a flow of control to another opinion, but I can't seem to access my opinion of this workflow call.
In other words, I can call the workflow bounded through a url and pass it a parameter, but once it is posted I can't go to my other point of view.
How can I do this?
Thank you
If you use a wildcard of navigation in the unlimited workflow as shown here https://tompeez.wordpress.com/2013/06/18/jdeveloper-navigation-after-return-from-bounded-task-flow/
It should work.
Timo
-
Passing a value to the URL of a CFC
Hello.
I'm not very familiar with coldfusion CFCS but I could follow a few examples that allow me to perform selects related using cfc code.
Recently, I came across a problem and do not find the answer using Google, so I thought I would ask here.
I have a form and the URL of this form contains a variable that I need to go to the SWC but I don't know how.
Here's the URL... myform.cfm? type = normal
So on this page myform.cfm I a call to a cfc like this < cfselect multiple = "" name = 'test' bind = "SWC:test.test_func()" bindonload = "true" / > "
In the CFC, I need to be able to modify the query in the test_func based on the variable named 'type' in the form page URL string.
How can I pass this type = normal in the cfc with the link to the cfselect?
Thank you
OK, got it. "In shape, I've added a hidden field named field_val with value =" ' #URL.type # ', then past this value form like this bind = "cfc:test.test_func({field_val}).
Then in the cfc, I put an argument for find field_val and it works.
Probably not the most elegant, but its working for now.
-
Pass the user inserted the URL text box value
It can be simple. I have a text field by default with the values in the database table, and this table cannot be updated.
Now when the user enters a value in the text field and press the submit, url that generates the button should have the value that has been entered by the user, not the database table?
How can I make this possible?
Thank you
SanJust create a button which is to submit a (not the redirect URL type and not type 'page of this application').
Create a branch of the page that goes to the desired page and sets values on the page desitnation accordingly.
As long as the Send button really sends the page, it should end up being updated with the new values of items in session state, and then they must be considered by the management of the page.
Maybe you are looking for
-
Failure catastrophic error code 0x8000ffff
Windows XP Media Center Edition, Windows Live Installer cannot install Windows Live Messenger. The program has been installed and used before uninstalling Norton 360 and running Microsoft difficulty It Center. My computer has somehow lost a few other
-
It worked normally, I weppe away for a few meals and goes to a blue screen with these three words as my only clue. Someone at - it ideas.
-
Not found HKLM declined loading wire Frost and this pop-up java hklm not found
-
Monitor is dark on one side...
My relatively new Dell Inspiron 1721 with Windows Vista monitor went dark on the right side. The far left seems normal, but in the middle and on the right are much darker usual - I want my eyes to read things things/see the strain. I tried all the se
-
Worked with activation, then disappeared, in Win 7 under VirtualBox
I have a XPS 13 22 Linux Fedora running. Win 7 is installed as a guest under VirtualBox operating system. 2013 office is installed. I implemented this successfully and activated Windows 7 and Office 2013 a month ago. Win 7 activation was not automati