Pass Variables through case

Hello! I'm writing a VI to control the material through a GPIB communication. The communication goes well. However, I would change that control vi is enabled for the user based on 'mode', the user selects. This mode is 1 in 3, and it would be determined by the user who clicks on a Boolean switch. My plan is for the passage to a single control of the LED, and when one of the three is on, the other two are turned off. If you click on a new LED, lights up and the others will be off. I have trouble doing this. I was planning on using a structure of the case, but I can't find a way to determine who has been selected and has that effect, because I can not change the values of each control in all cases to the structure. I thought using local variables and pass them through the structure of the case, but I can't seem to get this to work either. I appreciate any help to solve this. Thank you in advance!

You can simply use the radio button control.

Tags: NI Software

Similar Questions

  • Passing variables between LabVIEW and TestStand

    Hello

    I'm just learning how to use TestStand and although there are a multitude of resources available, I always find me at a loss on how to pass variables between TS and LV, leaving me to think that there is one fundamental thing that I'm missing which is likely, given that I have a weeks experience with LabVIEW and a days of experience with TestStand.

    I took a glance to the example of 'Clusters' to the Code Modules in TestStand examples (I use TS 2016 if it matters) because I thought it would be quite ideal for what I hope. In this case, I hope to be able to pass a string (a file path) to LabVIEW and VI power take this string and use it as part of an order for the Exec.VI system.  Then, I would be able to pass strings back to TestStand to show the user if an error occurred, but I thought I should get the first part of work.

    I guess my question is what do I have to wait to see in clusters to the example of the Modules of Code? The Watch window displays all defined variables premise on which has the ContainerOut in the Variables pane, but I don't see any kind of update on facades (VI1.vi and VI2.vi) LabVIEW code. Should I be?

    I looked at a few other discussions of the forum here and here, as well as the document of the basis of knowledge here, but could not recreate their solutions. It seems that the connector pane would be a viable way to go, but I'm not sure on how we create and use effectively. According to this document , it makes it seem like it should be simple enough to makes these terminals, but I am still missing a key step. I was able to follow all the steps on the knowledge base document and run the sequence, but then had no idea if it worked or not; I have the report show me the values of the variables I put, but I have no idea whether or not he actually did anything with the LabVIEW VI, or how I could see that.

    Please let me know if you need further information or clarifaction everything I ask.

    Thank you for your time,
    JColvin

    Digilent, a company of National Instruments

    If you want to enter values, you must create a vi for instance dialog box

    The OK button will allow new values to pass to the output terminals.

    A Cancel button will pass just the original through the output values without alteration. The VI will close when either the OK button or cancel were pressed.

    Concerning

    Ray

  • How to pass variables to the basket to your fund information?

    Here's what I have to do.

    I have a site that sells the same products to several groups of people.

    When a customer enters our site that they need to choose what 'group', they belong to.

    Based on this selection of some of the images, text and links on the pages are customizable (I can do this without problems using a combination of passing parameters through the URL, and writing based on cookies).

    My problem is when I get the extraction are the cookies that I wrote do not give because the url changes to the worldsecuresystems.com.

    I tried everything I can think of to try to get the information stored in the basket page to transfer to the payment page.

    I basically need to spend the 2 pieces of data based on {{globals.cookie.creditunion}} and {{globals.cookie.group}} in the cart at checkout it is added to the CMS or order somewhere.

    I hope that makes sense.

    James

    Hi James,

    Just like Mihai said, pass variables by using the url in the payment button.

    Use the liquid version to create a payment button, here is an example:

    Checkout

    Afterwards, you should be able to go to globals.get.creditunion or globals.get.group

    Good luck

    Stoiky

  • pass variables between classes

    Hello! I'm new to flash actionscript and I make a small game right now. I thought to create separate movieclips for each level of play and their assigned separate classes is cleaner and easier to code.

    for example: -.

    level 1 - level1.as

    level 2 - level2.as

    Level3 - level3.as

    My problem is how to pass variables (such as health, score, etc.) to a higher level?

    Please help I'm stuck on this and I have searched a lot but couldn't get the right answer...

    Oh, and I use cs3 flash with actionscript 3.0

    I don't think you really understand what are classes and movieclips.

    MovieClips are display objects; your character, the enemy, elements, platforms< these="" will="" be="">

    Classes can be used to define new elements or extend those which already exist, such as an object or a MovieClip.

    For the purposes of making a game, I would separate levels of executives.

    do level 1 on a frame labeled "level 1".

    and level 2 on a frame labeled "level 2".

    variables will carry an image to the image.

    Use gotoAndStop (frame_label) to switch between levels

    * Make sure you use stop(); on the first image to prevent bike between the frames.

    * You can make the frames between each level that has the code "gotoAndStop(previous level)" to prevent people to hit 'play' on the swf file and the cycling through your levels.

    You can also search for SharedObjects as a method of storage of variables even after that the swf file is closed.

  • passing variables between the pop-up windows

    I'm moving one popup to the other variables. It works fien if I spend bvariable of main application as soon as I'm moving from variable popup to popup window it does not work here is what I am trying ro:

    That works fine

    hand. MXML

    private function launchMoreInfo (): void {}
    var win: view = PopUpManager.createPopUp (this, opinion, true) as point of view;
    //

    victory. AccountNum = list1.selectedItem.accountNum;
    Win.User = user;

    }

    But if I try to pass variables to the pop-up window, created from popup component, is not ' work

    View.MXML

    private function dsclientevents (): void {}
    var win2:view = PopUpManager.createPopUp (Thi, dsclienteventlog, true) like point of view;
    //

    win2. AccountNum = 'test ';

    }

    AccountNum is declared in dsclienteventlog.mxml

    Is it possible to pass variables between the pop-up windows?

    I would much apreciate your help

    Thank you

    Hi friend!

    I have faced this kind of problem and solved using 'Public static var '.

    Just, you declare a public static variable in your class Popup. Then you can directly set the value to this variable as,

    ClassName.StaticVariableName = value;

    In your case,.

    say PopUp2.mxml or PopUp2.as

    =======

    In the PopUp1 script:

    OnItemSelectionChange (event): void

    {

    PopUp2.m_iSelectedID = DatagridID.selectedItem.AccountID; It will change the value of this variable, even if the popup2 is open.

    your stuff here...

    }

    Try this, I hope this will help you.

    Thank you

    Merlina.

  • Passing variables between Forms

    Hi, I am currently working on a rock, paper, scissors project in my class oracle. I was wondering if an oracle form to pass variables between them. I created a login form, and I would once a user logs on to change his user name to one opponent text fields username in the form of game. Is it possible and in this case you may be able to show me an example of passing variables between Forms? Thank you

    You can use the Globals for this purpose. I mean in your login form when your will enter its correct information then and it press OK to the newspaper by so you can for example store their username in the GLOBAL variable

    :GLOBAL.USERNAME:=:FORM.FIELD_NAME;
    

    This global variable, you can access a form any of the current session.

    -Clément

  • Is it possible to pass variables in FledgeController?

    We have some environment variables that change instance of Simulator, and it would be better that we could transmit in the Simulator, rather than having to write them to a file in the application to read running. Is it possible to pass variables in the FledgeController so they can be used as the app system environment variables?

    I don't think it's possible to pass via a command line.  But you can store this value in a file on your hard disk, Simulator one card micro SD and read the file in your application (although you mentioned that you do not want to).

    If you install via a JAD file, you can add the parameter to your JAD file and access them from your application.  But it's probably more complicated than to write a file.

  • Impossible to pass traffic through the VPN tunnel

    I have an ASA 5505 9.1 running.   I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.

    Here is my config

    LN-BLF-ASA5505 > en
    Password: *.
    ASA5505-BLF-LN # sho run
    : Saved
    :
    : Serial number: JMX1216Z0SM
    : Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
    :
    ASA 5,0000 Version 21
    !
    LN-BLF-ASA5505 hostname
    domain lopeznegrete.com
    activate the password
    volatile xlate deny tcp any4 any4
    volatile xlate deny tcp any4 any6
    volatile xlate deny tcp any6 any4
    volatile xlate deny tcp any6 any6
    volatile xlate deny udp any4 any4 eq field
    volatile xlate deny udp any4 any6 eq field
    volatile xlate deny udp any6 any4 eq field
    volatile xlate deny udp any6 any6 eq field
    passwd
    names of
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.116.254 255.255.255.0
    OSPF cost 10
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP 50.201.218.69 255.255.255.224
    OSPF cost 10
    !
    boot system Disk0: / asa915-21 - k8.bin
    passive FTP mode
    DNS server-group DefaultDNS
    domain lopeznegrete.com
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    the LNC_Local_TX_Nets object-group network
    Description of internal networks Negrete Lopez (Texas)
    object-network 192.168.1.0 255.255.255.0
    object-network 192.168.2.0 255.255.255.0
    object-network 192.168.3.0 255.255.255.0
    object-network 192.168.4.0 255.255.255.0
    object-network 192.168.5.0 255.255.255.0
    object-network 192.168.51.0 255.255.255.0
    object-network 192.168.55.0 255.255.255.0
    object-network 192.168.52.0 255.255.255.0
    object-network 192.168.20.0 255.255.255.0
    object-network 192.168.56.0 255.255.255.0
    object-network 192.168.59.0 255.255.255.0
    object-network 10.111.14.0 255.255.255.0
    object-network 10.111.19.0 255.255.255.0
    the LNC_Blueleaf_Nets object-group network
    object-network 192.168.116.0 255.255.255.0
    access outside the permitted scope icmp any4 any4 list
    extended outdoor access allowed icmp a whole list
    outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
    inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
    LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 741.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    !
    network obj_any object
    NAT dynamic interface (indoor, outdoor)
    outside access-group in external interface
    !
    router ospf 1
    255.255.255.255 network 192.168.116.254 area 0
    Journal-adj-changes
    default-information originate always
    !
    Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    the ssh LOCAL console AAA authentication
    AAA authentication enable LOCAL console
    Enable http server
    http 192.168.2.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec pmtu aging infinite - the security association
    card crypto outside_map 1 match address outside_1_cryptomap
    peer set card crypto outside_map 1 50.201.218.93
    card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
    outside_map interface card crypto outside
    Crypto ca trustpoint _SmartCallHome_ServerCA
    no use of validation
    Configure CRL
    trustpool crypto ca policy
    Crypto ca certificate chain _SmartCallHome_ServerCA
    certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
    010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
    30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
    0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
    65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
    68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
    302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
    63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
    010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
    082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
    ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
    45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
    1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
    6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
    445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
    1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
    2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
    quit smoking
    crypto isakmp identity address
    Crypto isakmp nat-traversal 1500
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    preshared authentication
    aes-256 encryption
    sha hash
    Group 5
    life 86400
    IKEv1 crypto policy 65535
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH stricthostkeycheck
    SSH 0.0.0.0 0.0.0.0 inside
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 5
    SSH version 2
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    management-access inside

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    attributes of Group Policy DfltGrpPolicy
    Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
    username
    username
    tunnel-group 50.201.218.93 type ipsec-l2l
    IPSec-attributes tunnel-group 50.201.218.93
    IKEv1 pre-shared-key *.
    NOCHECK Peer-id-validate
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    Review the ip options
    !
    global service-policy global_policy
    context of prompt hostname
    call-home service
    anonymous reporting remote call
    call-home
    contact-email-addr [email protected] / * /
    Profile of CiscoTAC-1
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:e519f212867755f697101394f40d9ed7
    : end
    LN-BLF-ASA5505 #.

    Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:

     packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail

    (simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)

  • Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is most of time consu

    Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is the longest part of the process, then I would be able to automate it.  Any ideas?

    This is the worst absolute way to embed fonts for PostScript through deletes dynamic transparency, color management, bookmarks, hyperlinks, etc. Yucck!  You are in many ways to ruin the files, do not clean them.

    Acrobat Preflight has a correction for embedding fonts. Takes only a few seconds per file PDF. And if you have a bunch of these files, you can create an action to do this.

    -Dov

  • How to pass variable from bean to resourceID for the document map?

    Hello experts, I have added WebCenter workflow Microsoft document explore task in my ADF which as a parameter called resourceId.   I want to pass variable bean to this setting, because the content ID (doc name or ID) are determined dynamically.

    When I provide ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} as a resource in the expression ID, it works very well.    But samething if I attribute to a bean bean variable and entitlement in the form ${sessionScope.MyBean.docName}, it evaluates the variable bean in the form ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} and then below throws the exception:

    [2013-10 - T 02, 14: 34:50.369 - 04:00] [DefaultServer] [WARNING] [WCS-07219] [oracle.webcenter.doclib.internal.view.backing.ContentProvider] [tid: [ASSETS].] [ExecuteThread: '10' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: d50192415c689920:-7d97126c:1417a5d6a49: - 8000 - 000000000000008 a, 0] [APP: CreateContactWSProxy] invalid parameter combination: the login name specified by resourceId = ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} is not specified in the parameter connectionName = UCM57Server.

    Variable bean is defined as:

    private String Nomdoc = "${" UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI "} ;

    Please give me some advice on how to pass the value to resourceId dynamically via the variable of bean.

    Thank you.

    private String Nomdoc = "UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI";

    Without $ {}

  • passing variables with "ProgressEvent.PROGRESS.

    Hi all, I have this code:

    imgContainer.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, function() {loadProgress (charger)});

    function loadProgress (aa): void {}

    var percentLoaded:Number = Math.round ((event.bytesLoaded/event.bytesTotal) * 100);

    trace ("loading:" + percentLoaded + "%");

    percentCar = percentLoaded * 3;

    AA. Width = percentCar;

    AA.x =-percentCar/2;

    }

    but does not work because of the way in loadProgress no event is to calculate bytesLoaded ecc...

    How can I pass variables in this formula?

    Thank you very much

    use:

    imgContainer.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, loadProgress);

    function loadProgress(event:ProgressEvent):void {}

    var percentLoaded:Number = Math.round ((event.bytesLoaded/event.bytesTotal) * 100);

    trace ("loading:" + percentLoaded + "%");

    percentCar = percentLoaded * 3;

    Loader.Width = percentCar;

    Loader.x =-percentCar/2;

    }

    or, if there is a really good reason to spend charger in your use of function loadProgress:

    imgContainer.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, {function (e:ProgressEvent)}

    loadProgress (e, loader)

    });

  • How to pass variables by using the command line when starting from a native application ActionScript

    How to pass in variables or arguments to start using the command line when starting a native ActionScript application? For example, I have my app MySweetWidget call and it was compiled with Adobe AIR runtime in captivity so now I have MySweetWidget.exe.

    In the command line, I call MySweetWidget.exe and would like to pass in variables or properties of the application. I guess that these variables are read from the loaderInfo.parameters object.

    Please let me know if the Adobe AIR runtime supports passing the parameters to native execution. If so, I would like to help determine the correct format of how pass variables. So would you want to read those loaderinfo.parameters object?

    Thank you

    Jeff

    I found the answer to my own question:

    Yes, it's a feature supported. It is documented on the following page:

    http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/desktop/NativeApp lication.html #event:invoke

    When you subscribe to the event from the NativeApplication invoke it will subsequently send the event and you read the table of e.arguments object to get the start in the native application arguments.

  • Pass variables flash server - the best way?

    I use URLVariables right now to pass variables from flash to the server via the php script and update a database lines.

    var variables: URLVariables = new URLVariables();

    Currently about 9 variables are sent which are then updated in the mysql database.

    I read that the database via php calls are the main source of traffic, or at least one of them. I don't know from 100 to 500 concurrent users.

    Obvously I need expert help in the medium term, but I would like to give things a go myself.

    I've read about amfPHP, but I don't seem too well.

    Also, I can cut down the amount of php by user calls as I have anywhere for many games and mini exercises.

    BUT it is possible to get these nine variables in an object and pass the object. An object would be faster than going 9 variables and would this object placed in a cell in the mysql database.

    What would look like this? For now I can read my db easily, but if there is an object, how do you read that?

    -What is serializning? Passing an object and all data is converted to binary etc...

    As you can see, I'm a little lost.

    Thanks in advance.

    If you use a URLVariables object, then you are only passing an object even when that. I leave which, as you have. You can use Fiddler (I prefer Charles) or Charles to see all your data being passed - he did do this kind of stuff much more enjoyable.

    Serialization is simply the process of taking any Flash object, like a table and turn it into a format (such as plaintext) who can read the script on the server side.

  • Passing variables ActionScript 2 using javascript

    Hello

    I tried to pass variables to a flashdrive with on the page refreshes. In doing my research I fell I cross things like externalinterface and others.

    I found a javascript + actionscript who spent ariables flashing without updating the code page:

    I have therefore 8 flash with actionscript 2.0.

    HTML:

    <SCRIPT LANGUAGE=JavaScript>

    <!--

    function callJavascript() {}

    Mathias var = inputValue.vars.value

    window.document.myMovie.SetVariable ("testValue", Mathias);

    }

    ->

    < /SCRIPT>

    <object classid=' clsid:d27cdb6e-ae6d-11cf-96b8-444553540000 ' codebase="""http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8, 0,0,0" " " width="550" height="100" id="myMovie" align="middle"> "

    <param name="allowScriptAccess" value="sameDomain" />

    <param name="movie" value="setplay.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffcc00" /><embed src="setplay.swf" quality="high" bgcolor="#ffcc00" width="550" height="100" name="myMovie" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
    </object>
    </body>
    <p>
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<input type=button value="Pass the variable to Flash" onClick="callJavascript()">
    <form name="inputValue">

    <a href="javascript:callJavascript()"> flash one</a><input type="hidden" name="vars" value="1.flv"/>
      </form>
    </html>

    I have a flash drive with a movie player instance name of myVid:

    ActionScript:

    var testValue:String = "";

    watchCallback = function (id, oldval, newval): String {}

    result_txt. Text = newval;

    myVid.play (newval);

    return newval;

    };

    _root. Watch ("testValue", watchCallback);

    The code gets the variable var in the html page. Pass vars to actionscript using javascript, displays text on result_txt and play flv video with similar name to a variable passed.

    The problem is:

    I have several a href links that I would like to have the different variables that they would pass to the flash drive.

    < a href = "javascript:callJavascript ()" > flash < /a > < input type = "hidden" name = "var1" value = "1.flv" / >

    < a href = "javascript:callJavascript ()" > flash two < /a > < input type = "hidden" name = "var2" value = "2.flv" / >

    < a href = "javascript:callJavascript ()" > flash three < /a > < input type = "hidden" name = "var3" value = "3.flv" / >

    < a href = "javascript:callJavascript ()" > flash four < /a > < input type = "hidden" name = "var4" value = "4.flv" / >

    How can I change the code so that if someone clicks on a flash of the value of var1 is passed to flash.

    and if two flash is clicked var2 are passed to Flash.

    Thank you.

    http://circlecube.com/2008/02/ActionScript-JavaScript-communication/

  • Passing variables by reference

    Hello

    Is it possible to pass variables by reference as the arguments of a function?

    Thank you.

    All scalar values are passed by value. Anything else is passed by reference. There is no language syntax to control this behavior in AS3.

Maybe you are looking for