passage png to excel

I'm trying to understand how to move a png file for display in excel. I have the report generation package. Examples would be greatly appreciated.

Thank you

TCjr,

You should be able to use the Image add to Report.vi to do.

Tags: NI Software

Similar Questions

  • Windows 7 Aero and Office 2013 incompatibility

    I originally asked this question in the Community Forum of Windows, but it occurs to me that it could be related to VMware Tools and how they treat of Aero Windows 7, if I copy the thread here.

    So, I would like to run a windows on my MacBook Pro image for backward compatibility.  Here is the image I created.

    MBP OSX 11.8.2 with VMware Fusion 5.0.1

    Windows 7 SP1 64-bit 6.1.7601

    Office 2013 15.0.4420.1017 64-bit (Final)

    VMware Tools 9.2.1.818201

    From any application with active Aero, Office 2013 creates a white screen where you can see a few artifacts when you hover over them and you can close the application by clicking on the upper right (no doubt the 'X' would be expected normally).


    Disabling Aero product of the normal and of course desktop features, applications is as ugly as the new office.

    Given the direction that MS has taken on the reduction feature, I understand if the answer to my question is that MS wants that disable you Aero.  no doubt, so I'll get used to less features and be more willing to downgrade to Windows 8.  But the white screen appears like a bug.

    Have I not this wrong?  Is there a way to keep active Aero and always use Win7/Office15?

    What I write is a screenshot of the screen of my MBP, so you can see exactly what I see.

    Office 2013 is the only program that has this problem.
    I said on two virtual machines running on the same laptop, both using Windows 7.

    Here is the word off Aero.
    http://ironbravo.com/public/20121027/Off%20Aero%201.png

    Here is my active desktop with Aero.
    http://ironbravo.com/public/20121027/On%20Aero%20Desktop%201.png

    Here's the word on Aero.  Note the search engine for artifacts when I mouse over it.
    The application is also black.
    http://ironbravo.com/public/20121027/Word%20on%20Aero%201.png

    I also tried to use an Aero feature of failover to an application with the preview showing.  It shows as black.  Here is the image.
    http://ironbravo.com/public/20121027/Word%20on%20Aero%202.png

    Excel on Aero has the same problem.
    http://ironbravo.com/public/20121027/Excel%20on%20Aero%201.png

    Does PowerPoint
    http://ironbravo.com/public/20121027/PowerPoint%20on%20Aero%201.png

    On Excel and PowerPoint, I wriggle on the Find dialog box when I took the screenshot.

    What is potentially interesting, is when the application starts I see the splash screen and when he closes by selecting the hidden in the upper right corner X, I see an animation to minimize the screen.  It is very remarkable because you see the colors of the theme of the application, like Word blue, green for Excel, or red for PowerPoint.

    So, I'm not sure how useful screenshots of a black screen can be, but they are.


    Your question about compatibility mode, I checked the Windows 7 App compatibility is not enabled for this application, and I do not remember having enabled for all applications in the image.  I've done was by viewing the application settings of the dialog box Word 2013 icon properties on the Compatibility tab.

    My laptop has a screen of 2880 x 1800, so I reduced the size of the images here.
    When running in full screen, rather than a window, the results are the same.
    All files are stored here if you want to than the original images.

    http://ironbravo.com/public/20121027/

    Thanks for your thoughts.

    http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-office_install/Office-2013-Windows-7-Aero/af3323ac-11e0-4f62-AC4B-6d6171645baa#LastReply

    My reasoning is that this feature seems to be only a problem for the virtualized image.

    So, I'm curious to know if others have seen problems with Aero in this configuration.

    Instead of disable 3d acceleration in vm settings have tried to disable hardware acceleration in individual office applications?   activate the acceleration on vm.

  • Pixelation png in the document and the passage to a specific layer

    I am wanting a JavaScript which will focus on the active document and find images (.png files) and rasterize each graph for RGB 150 ppi.

    Then move the files to an already existing in the name of the document layer: 1 data

    The 1st layer of data is inside a layer more in the document if it makes a difference.

    Can anyone advise as to whether it's possible to do something?

    Any help would be greatly appreciated!

    Windows 7 64-bit and Illustrator CS4

    Your script should find a way to pass the rasterItems permit in your layer.

    var myLayer = myDoc.layers.getByName('1st Data');
    for ( var i=0; i < myDoc.rasterItems.length ; i++ )
    {
      var thisItem = myDoc.rasterItems[i];
      thisItem.move(myLayer, ElementPlacement.PLACEATEND);
    }
    
  • Received a message that my user profile cannot be loaded and it is maybe damaged. He received after the passage of a user to my profile. Lost access to Excel, Word, etc., with the Favorites

    No new hardware or softfware added lately. No change to all programs.  Error message says contract system administrator.  That would be me and I have no idea what to do

    Hello RogerAW,

    Thank you for visiting the Microsoft answers community.

    This problem can occur if the current user profile is damaged. To resolve this problem, create a new user profile.

    Take a look at the article for more information: click here

    Here you can find information about creating a user profile and copy your data from your old profile.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to open a png file using firefox with windows 7

    In Windows XP, I could save an image in png format, and then open it using firefox, copy and paste into an excel spreadsheet. But I can't do this in Windows 7. Has anyone else encountered this problem and found a solution?

    Kind regards

    You should be able to select another program to open the PNG image and then find the Firefox program folder and select the firefox.exe program.

    If it does not the Firefox program appears in the Windows "Open with" list next time temporarily to set Firefox by default, then replace it at a later date to the preferred program.

  • Creation of Refnum Automation to Excel

    Hello

    So I've worked to read Excel documents with report generation tool, but realized the document I was trying to read is password protected and requires an update link (PivotTable).

    Searching I found an accessory useful toolkit Joe_H (post #2) http://forums.ni.com/t5/BreakPoint/Excel-Board/m-p/379682 . I try to recreate its VI, but there are some things I don't understand. (I started only working with refnums & variants)

    My Questions:

    1. referring to my 'refnum.png' attachment, black refum automation is copied from example VI and purple is what I tried to do. They have the same ActiveX class, but purple throws an exception error 3005. I can't find the refnum of the black arrow.

    Googling this error, gives a solution, but I can not understand how to use or if it applies to me. http://forums.NI.com/T5/LabVIEW/error-3005-occurred-at-Automation-open-using-ActiveX-RichText-box/TD-...

    2 referring to 'excel.png' for the node invoke - workbooks, how is a person knows how to use the data types variant? For example, WriteResPassword I just tried to use a string and it worked. I noticed that the help info gets thinner when working with property/Invoke nodes.

    Thanks for your time.

    I don't know why the difference in colors between the refnums, but I doubt that's the problem. Looks like it's just an artifact weird opening a VI from an earlier version of LabVIEW. If you convert this refnum control to a constant and then again to a control, it will turn pink, but I guess it will always work. Can you show the code showing you how you use this refnum?

    As mentioned nyc, you refer to the Microsoft documentation to determine what kind of data for wire entry variant. There is no documentation of LabVIEW because it is not a component of LabVIEW.

  • Save chart as image (activeX) excel

    Hello community,

    I generate files xls to couple of thousands who have some data, and a chart on the first sheet. Once the files are generated, I would like to sweep through all of them and save the chart as an image (BMP, GIF, PNG, whatever).

    I have however without success. I guess I'm pretty close, using the export method, but in fact nothing happens, the file is not created. (the worksheet selection is good, and array index must be one, such as 0 or 2 gives me an error message even if it is OK.)

    Any ideas?

    THX.

    PS: I know how to export an image of a labview diagram, but I want to export without excel...

    Instead to get a reference to the collection of worsheets workbook, you need to get a reference to the collection of workbook (which is the collection of all the workbook chartsheets). You select the chart sheet by using its index and convert the element resulting in an Excel._Chart object (this is where you use this object). You can then export it.

    Ben64

  • LabVIEW 2015, some of the Excel worksheet data moving to another Excel sheet

    Hi, guys.

    I want to achieve functional on the transfer of data between the Excel sheet.

    For example I get addresses of the cell, then the data in the passage of the address to the other Excel sheet a particular cell.

    What can I do? Thank you.

    Report generation Toolkit a buit in VI you can use for your fact condition, but its an add we toolkit to separate license.

    ActiveX doesn't require external tools, but need to create your own LabVIEW Code using properties and methods.

    Look at this thread which will be useful for creating custom code using Activex.

    http://forums.NI.com/T5/breakpoint/Excel-Board/m-p/379682/message-UID/379682#U379682

  • Control of data rows Excel (write on a file of measure)

    Hi all

    Objective:

    Get a bit of a live waveform of two pressure sensors, as well as calculate the differential pressure. The LabVIEW VI is intended for students for an exercise in module, in which data are exported to an excel file for the students to perform other calculations. Excel file must contain data from the beginning to the end of a race.

    Problem:

    Pressure sensors work well, waveform table works well, but when you stop the collection of data, the amount of lines in the file Excel output will reflect the number of samples per channel of the DAQmx Read Block (10 = 10 rows of data, 100 = 100 lines, etc.).

    I would appreciate some advice on how to conduct the data collection in the part worksheet from start to finish, without this affecting the aesthetic experience of the student (by that I mean the number of channels of the > 10 sample will cause some lag in the waveform, jerky). I tried to resolve this issue with something in the sense of Tank1Solution.png without success. I've included a photo of the original block (Tank2Block.png) and so I worked the file VI.  Once more, any help would be much appreciated, I'm not well versed in LabVIEW and I do not know how to address this problem effectively.

    Some guys are always doing things the hard way

    Of course, you need a son to ai0 - ai2 and ai1 - ai9.  This linear scale DAQmx is of course very convenient! and hey, the TDMS files import beautifully into Excel! the addon is there then why not just open a session data?  TDMS is much more portable than xlsx.

    A few additional remarks. (a) you can't stop this vi before you press Go-who needs a fix. (b) Create scale is likely to return an error as it is the name being illegal. I named it that to show the source of the scale and offset values.

  • How to measure the difference in time between the passage by zero of a sine wave and the rise time of a pulse on a same graphic?

    I have a sine wave of 50 Hz and a pulse of the signal on the same chart. The difference in phase between the two is between 0-90 degrees.

    Now I need to calculate the time difference between (when the sinusoidal wave passes through zero volts) and (when the pulse increases). The frequency will remain about even for the two signals.

    The request is for a three-phase generator. In simple terms, when the difference in time between the passage to zero of the sine wave and pulse increases increases, it means that the load on the generator has increased.

    I am a novice user of LabView (version 9, 2009), maybe it's a very simple problem but I was pulling on my hair for the past few days and couldn't understand anything. Any help would be greatly appreciated. I use DAQ USB-6008 to measure these tensions and the impulse of the generator and a sensor

    I have attached a jpg file (a graphic that I just did with excel to explain). The time 't' is what I'm trying to measure

    See you soon

    Zdzislaw

    Awais.h,

    For problems of this kind I recommend start writing the granular steps you would take to manually fix this problem.  You can't say LabVIEW (or any programming language) If you can't succinctly describe the solution to your problem.

    The I want to address this problem is to:

    1. find all the zero crossing points and edges on the rise
    2. for every rising edge find the difference between the timestamp and previous passage by zero

    Here is an implementation of this algorithm LabVIEW:

  • How to write a single value in an excel spreadsheet

    Hello

    I use an excel spreadsheet, as if it were an external code module. He does a lot of calculations, all I do is write an individual value, let calculate what it should only then read a return value from this.

    I already have a structure able to read a table, but could someone help me with a piece of code that could write a single value?

    (To read a value unique too may be practical)

    Also, I have the new LabVIEW 2009, so while a fancy to drop some code here as one. PNG, it would be nice to see if this new feature works!

    Thank you, Alec

    Try this. There are 2 point methos (get) and point (put) to read and write the value respectively to a cell in excel.

    Good luck

  • How to keep the window Excel always on top in this particular case?

    Hello world

    I have Windows 7 64 bit and Excel 2010 32-bit (Dell XPS 15z). I want to keep Excel 2010 always above other windows/programs/applications after race/start Excel "as Administrator". How to do this?

    Question in details:
    I have only a single administrator login account and I've logged on as administrator. I need to keep Excel always on top. So I tried Office Pin, window On Top, software etc. but it does work because I open/running Excel 2010 (32-bit) as administrator due to need particular.
    I open/running Excel after changing the Excel.exe file "property > compatibility > privilege level" by selecting "Run this program as an administrator", as shown in this picture http://i.imgur.com/iEmyz.png. I get live market of software to Excel data, now I have to keep my Excel always above other windows all I can work on other applications/windows/browsers while still keeping the Excel on top.
    Someone help me how to keep Excel always on top?
    Thank you much in advance.

    Fact. Problem solved.
    Control Panel > user accounts > change user account control settings > never notify (downstairs bar selection at least never notify) > OK (click OK).
    Restart the computer. Open Excel and PIN with DeskPins and now its works well.
    DeskPins earlier did not work for Excel (because the compatibility of Excel.exe has been amended as indicated in the previous/top of the post) but now its working fine after that changing the settings in the user account control settings and then restarting the computer.
    See you soon!
  • The dashed lines in my Illustrator file deform when I copy/paste the in Excel. Otherwise, the image is fine. What I am doing wrong?

    The dashed lines in my Illustrator file deform when I copy/paste the in Excel. Otherwise, the image is fine. What I am doing wrong?

    The lines end up looking much bigger than they were initially.

    I am using the paste special option in Excel and it works fine for all parts of the image, but this.

    Someone suggested I try to use the Mode plotted, but who has not made a difference when I tried.

    The map view wouldn't make any difference, so more clarification is needed on your workflow.

    Why it's not working for you save the image as a png image in Illustrator and then insert it correctly as a picture in Excel?

    What are you trying to make to it after that's in Excel? If the PNG workflow does not work for you, then explain your workflow. It might help to know if you're Mac or Windows and the version numbers and maybe screenshots.

  • How to export a transparent background as a PNG sequence

    I am currently working on a project of special effects editing and I want to remove the black background behind it. I used the screen blending mode to remove the black background and then exported as a PNG sequence (I need in this format), taking care to tick the box of alpha layers before you export. However, when I look at the rendered result, the images still have a black background. Can't export as a PNG with transparency? If there is a box for allowing alpha channels then shouldn't I power? I'm doing something wrong?

    Hello

    To my knowledge, you can't knock out black with a screen blend mode unless you are compositing it on another element. If you need information on what is generally referred to as "Unmult,' (black unmultiplying to be used for a visual effect) you can read this excellent article from Rich Young on PVC: 'Unmult" with and without plug-ins special by Rich Young - ProVideo Coalition

    In the future, I recommend that you check to see if you create an alpha channel. Check it out by switching on the transparency grid in the program monitor. You can also put the Composite Alpha to check the alpha before export. See screenshots.

    Thank you

    Kevin

  • Office of the Publisher bi 10 do not work in Excel?

    I have a problem with BI Publisher Desktop 10.1.3.4.2 for Windows . It will not be displayed in Excel Add-ins, but it works in Word. Why is this? and how can I solve this problem?

    Use: I tried to install office 2010 and 2007. Have java 7 in 55, jre8 and .NET 3.5 include 2.0 right? So, it should work.



    Update:


    4.1.4 oracle BI Option disappears in the Excel Menu

    This problem applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, 10.1.3.4.1 and 10.1.3.4.2.

    If the Oracle BI menu disappears from the Excel 2003 or Excel 2007 menu bar, try the following steps to restore:

    • For Excel 2003: Select Help on Microsoft Excel, then disabled.
    • For Excel 2007: Select Excel Options, and then click Add-ins. If the Oracle BI Add - in for Microsoft Office is listed as an element off, then you can activate it in the disabled items dialog box by selecting the item and clicking Activate. "


    I checked it, there is nothing to turn.


    http://S12.postimg.org/q3fqxl8ot/capture.PNG



    not sure about beep office 10 on Excel models

    do not remember exactly but

    -Model Viewer works with excel model for 10.1.3.4.2

    -template for excel generator does not work

    so for Excel to move to 11 models

    ADD:

    found mos id for my statements

    How to obtain the latest Version of Oracle BI Publisher Desktop? (Doc ID 1362518.1)

    Post edited by: Alexandr

Maybe you are looking for