passes the Add problem

Similar Questions

• Pass the continuous problem N200

  Hello

  I have build a systems that need constantly transmit packets containing only zeros and at certain time interval (for example every 2 seconds) pass a package valid ofdm. "" My problem is that the transmission vi ' niUSRP writing Tx Data "is too fast. If I want to send 10000 samples with a rate of 1 MS/s IQ my time forward must be 10 ms but in Labview, the VI takes only about 1 ms to transmit the data to the buffer of the usrp boards and then jumps back and already transmit the next packet. For this reason I can't pass my ofdm packet to some a timestamp as I have no idea on the amount of data is buffered to the usrp currently, etc.. If I use the "end of data = true" property of the "Tx Data niUSRP writing" - VI the time is much greater than 10 ms.

  Someone at - it an idea?

  Thank you

  I think the best way to ensure that no value is lost is the architecture of the producer consumer.

  Maybe you should give it a try

  If you do not know, you can read a few items here:

  http://www.NI.com/white-paper/3023/en/

  This should do what you want, I think

• Extension cuevana problem, does not appear in the add-ins preferences

  Everytime I open Firefox displays a window that says: cuevanatv.asia, I have read articles where they say I have to remove cuevana extension but preferably is not the add-ins tab.

  Also, I can't open Firefox in SafeMode because when I try to open Help appears again the cuevanatv.asiatab.

  I already remove Firefox and installed again, but it does not work.

  You can use one of them to start Firefox in Safe Mode:

  • On Windows, hold down the SHIFT key while starting Firefox with a double click on the shortcut to the desktop Firefox
  • On Mac, hold the Options key when starting Firefox
  • Help > restart with disabled modules
  • https://support.Mozilla.org/KB/safe+mode

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I have a problem with a toolbar called searchqu I remember not install, it does not allow me to have MSN as my home page, I removed the add on but still have the problem. Thoughts?

  had an add on searchqu somehow called installed. He does not think I have msn as my homepage. I removed add it on and still have the same problem.

  See the pages on searchqu and these discussions:

  • [816181/questions/816181]
  • [790833/questions/790833]
  • http://bit.LY/searchqutoolbar
  • http://www.ilivid.com/FAQ.htm#8

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• Director of the UCS, problem add UCS C-series

  Hello

  I have problem with UCS Manager 5.0, ocurr of problem when you add the server UCS C200 M3, the error is as follows, the MMIC version is 2.0 (3d).

  print_ucs.PNG

  

  connectivity issues are rejected as UCS UCS Director & MMIC are in the same network, have been tested with different servers for the same problem.

  Thank you!

  Hi,Cristobal

  Take a look at the compatibility table for Cisco UCS Manager, version 5.0

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/UCS-Director/...

  It is said that UCSD supports MMIC from 1.4 to 1.5.

  So, try to level UCSD 5.2 or 5.3.

• Number of product Version of the Add-ons Adobe problem

  Hello

  I'm a producer by downloading a patch on my product page: https://creative.adobe.com/addons/products/2465.

  
  

  The problem is that the producer Portal auto - increments the version number for each patch downloaded. It makes sense, if the product is only ever seen through the portal of the add-on. But for us, it is a big problem since the product is distributed in a number of other ways and it is important to keep the version number the same across all channels, otherwise, our customers become confused. For Juicebox, we have up to 4 version numbers (currently on 1.4.4.2)

  
  

  If the demand is to allow producers to specify their own version number when downloading the patches. I don't know I'm not the only add-on producer with this issue.

  
  

  Thanks for listening.

  
  

  Kind regards
  

  Felix Turner

  Founder and CEO

  SimpleViewer Inc.

  www.SimpleViewer.net

  Hi Alexander, I believe that the version of the hotfix number is picked up in the manifesto/MXI if file you specify in there.

• Problem with passing the values in a report to the other

  Hello
  
  I am Agnes, I have developed 2 reports. Summary of the first high level, Mithraeum is detailed. First report is developed using Union (4 union), I have 4 columns. The report generates data. I used the Navigation option on customer column to go to the second report. In the second report with filter I use the easier option. Due to a problem, the customer value of the first report is failed per second. The second report is getting generated for all customers.
  
  Normally, I have used this option to navigate through other reports and which works very well. I even tested with Union, it works. This time is to give some difficulties.
  
  Please, let me know what goes wrong.
  
  Thanks for the help.

  If your Union pivot source then by a simple navigation that you can not pass clicked value to the second report.

  With the help of GoNaV you can pass the selected value source union pivot report to the non-Union target report. If the target report is also union pivot, then it won't pass filters using GoNav.Not sure that because someone talked about a few days back that with the help of GoNav possible to pass the value of a union pivot query to pivot anothet union report.

  Kind regards
  Sandeep

• Problem by passing the values in the url

  Hai...
  
  I have created a report region1, because I change the link to change the values, after clicking on the edit link region.2 will appear, im passing in the url of the region.2. My problem is that the values of a ': ' in that... so by passing the values in the url im not getting the onlu 'Region.2' for values that got ':' in it... How can I overcome the issue.
  
  im passing value contains ':' in this example:-"petroleum products: Europe.
  
  When I pass this URL im get like this
  
  http://nypploratest.Platts.McGraw-Hill.com:7777 / pls/dews/f? p = 100:105:1304192021604971:NO:P105_NEWS_CODE,
  P105_NEWS_DESCRIPTION, P105_NEWS_CODE_HIDDEN:PDD % 2COil % 20Products: % 20Europe, 2-1 colon is included in the url
  
  
  Please help me...
  
  Thank you
  
  David

  Yes, it's possible. Depends on what you are doing. Source value of the element can be a query, so if you have spent the value PK of a line in a table to the page, then the query source of this element could extract the line using this key and use the text value retrieved from another column to fill the text element.

  Scott

• I have a second hand I pad problem is Ir won't let me pass the authorization page and maintains have turned off every 2 minutes, anyone has any suggestions please

  I have a second hnd I pad that won't let me pass the authorising officer page and although his full load it continues to go off after every 2 minutes

  Help, please

  Thank you

  Do you mean that you need Apple ID from the previous owner to enter the iPad?

  If so, bring her back. There is no way to get around that. It is called locking activation and is not something that a user can bypass

• How can I fix the problem of my HP Photosmart D7160 showing a message this cartridge has passed the expiration date?

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  Contact HP?

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dynamic L2L Tunnel - the Tunnel is up, will not pass the LAN traffic

  Hello everyone. I am repurposing an ASA for my business at a remote site and must use a dynamic Configuration of L2L with Split tunneling active. We used these in the past and they work a lot, and I've referenced Cisco official documentation for the implementation. Currently, I am having a problem where I am unable to pass traffic on the local remote network over the VPN tunnel (it does even not raise the tunnel of form). However, if I run the following command in the ASA remote:

  Ping inside the 192.168.9.1

  I receive the ICMP responses. In addition, this traffic causes the VPN Tunnel to be created as indicated by show ISA SA:

  1 peer IKE: xx.xx.xx.xx

  Type: L2L role: initiator

  Generate a new key: no State: MM_ACTIVE

  Here is the IP addressing scheme:

  Network remotely (with the ASA problem): 192.168.12.0/24

  Basic network (Hub): 192.168.9.0/24

  Other rays: 192.168.0.0/16

  Config:

  ASA Version 8.2 (1)
  !
  hostname xxxxxxxxx
  domain xxxxxxxxxxx.local
  activate the xxxxxxxx password
  passwd xxxxxxxxx
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.12.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT
  DNS server-group DefaultDNS
  domain xxxxxxxx.local
  permit same-security-traffic intra-interface
  to_hq to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  inside_nat0_outbound to access extended list ip 192.168.12.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.0.0 255.255.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto outside_map 10 correspondence address to_hq
  crypto outside_map 10 card game CORE peers. ASA. WAN. INTELLECTUAL PROPERTY
  outside_map crypto 10 card value transform-set ESP-3DES-SHA
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd 192.168.9.2 dns 208.67.222.222
  !
  dhcpd address 192.168.12.101 - 192.168.12.131 inside
  rental contract interface 86400 dhcpd inside
  dhcpd xxxxxxxxx.local area inside interface
  dhcpd ip interface 192.168.9.50 option 66 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  tunnel-group basis. ASA. WAN. Type of IP ipsec-l2l
  tunnel-group basis. ASA. WAN. IPSec-attributes of intellectual property
  pre-shared key xxxxxxxxxxxx
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname

  Once the tunnel is in place, LAN to the Remote Site traffic won't pass through the VPN Tunnel any upward. On the side of ASA Core, I was able to Telnet in the ASA distance very well, but could not ping the Remote Access Point.

  Someone at - it a glimpse of my problem?

  Hello

  Add:

  NAT (inside) 0-list of access inside_nat0_outbound

• How to pass the value of a column to a variable to be used in another analysis

  Hello

  I'm on OBIEE 11.1.1.7.1.

  I have the following problem.

  I have DISCOVERED called analysis. It has just a column with the result. Simple. Assume that the answer is 2500

  I have another scan which has two other columns, namely GOLD and LOANS. I want to calculate the total DISCOVERED + GOLD + READY.

  That's why I need to pass the value of 2500 of the first analysis of the second analysis via a variable.

  I can not add all three of them in the same analysis there are various filters for OVERDRAFT, and the application of these filters on the GOLD and LOANS gives the desired result. I tried to add filters in the column of the overdraft, but that doesn't seem to work.

  Any help will be greatly appreciated.

  I'll give you an example. I hope that you will mark for my time...

  Hope that you will be aware of how to combine a similar request.

  in the first criterion you have

  Goldprice Loanamount year 0

  Second criterion

  Year 0 0 Overdraftamount

  the two maintain the necessary filters.

  Add a column of result (option you can see in the topic area pane) that add all three columns. You can choose the columns. formula will come something like below

  saw_1 + saw_2 + saw_3

  Thank you

  AJ

• Passing the params to the method AMImp to support bean

  Hello. I am a Jdeveloper/ADF Noob and I have a requirement where I created an AM method below and exposed to my view controller.
  
  I use this Jdeveloper 11.1.1.4 Doe.
  
  
  In AM
  ' public boolean createSRTask (String sourceName, number sourceRow)
  {
  Insert the new row in the object of the entity.
  EntityDefImpl SRTaskDef = MassSrImportEOImpl.getDefinitionObject ();
  MassSrImportEOImpl newSRTask = (MassSrImportEOImpl) SRTaskDef.createInstance2 (getDBTransaction (), null);
  newSRTask.setSourceName (sourceName);
  newSRTask.setSourceRow (sourceRow);
  Return (true);
  }
  
  I have a text file that I read and I get the parameters of the transformation of this file when the user press the upload button... I can loop through the contents of the file etc with no problems, but I still
  to understand how the bean support to call the AMImp method with the parameters that I read in the code.
  
  Thanks in advance for any help.
  
  Published by: 832187 on January 16, 2012 06:51
  
  Published by: 832187 on January 16, 2012 07:01

  In this case, you need to build a VO which is built on EO, add it to the data model of the module of the application. You can either implement the service method in the original Version or the module of the application. Suppose that you put in the AOS (application module) as you once did. the method it would look

  //In AM
      public boolean createSRTask(String sourceName, Number sourceRow) {
          ViewObjectImpl massView = (ViewObjectImpl)findViewObject("MassSrImportView1");
          Row row =  massView.createRow();
          row.setAttribute("Source", sourceName);
          row.setAttribute("SRCNR", sourceRow);
          massView.insertRow(row);
          return true;
      }
  

  Some note on this:
  1. the rows are not inserted in the comic book, as long as you do not post the transaction
  2. it doesn't look like your point of view is not a PK. The framework works best if you have a
  3. If you always return true, you can omit the return value completely
  4. If you plan to insert several lines, you should consider passing the file to the am method and a bulk insert in there it would reduce round trips.

  I highly recommend the that read the http://docs.oracle.com/cd/E25054_01/web.1111/b31974/bcintro.htm for more knowledge about the business layer.

  Timo