passing the value of the item to another page

Similar Questions

• Pass the value of the item to another page of link

  Dear,
  
  I would like to pass a value of item to another page.
  I use:

  http://xxxxx:7777/pls/apex/f?p=200:46:80254239052108::NO::P46_TEST,P46_TABLE:#LABEL#,&P56_HW

  # is wel #label moves to the next page but no P56_HW.
  
  Could someone help me?
  
  THX.
  
  Celio

  Hello

  You are missing the point in the end, it should be & P56_HW. (with the full stop), which is part of the syntax of substitution.

  See you soon

  Ben

• Copy the value of the item to another page of the apex in a field

  I have a main table and adds a new button.

  In my master table, there is a client code.

  If I press this button again, I will be referred to another form on another page where I can create log files.

  For the moment, I have to insert the client code in this form.

  How is it possible to copy the customer ID, if I press the new button in the main table, if this customer code (value) will be copied

  in another article on my other page?

  Hello

  What version of APEX are you using?

  Solution for this should be simple.

  Just edit the button element. Assign it "Action when the button is clicked" "redirect to the page of this application.

  "Then set: Set on these elements ' with the name of the target element and the 'with these values" with the name of the source element.

  The same works also for reports. But instead of the nom_element, you must add the column name as: #COLUMN_NAME # for 'with these values.

  Concerning

  J

• passing the parameter through links page (navigation)

  Hello

  suggest me the way to pass the parameter through links in the page navigation.

  I tried it in EL, I'm not able to get on the page.

  is it a right approach or any other.

  Thank you

  A

  After showing the steps in the similar thread, I found this thread then re-post here.
  

  Pass the connection parameter to connected in portal Builder page

  
  

  Here are the steps to pass the parameter in a URL to another page:

  • Add a custom attribute to the attributes of the current portal (say MyPortal1) page [link Direct: http://127.0.0.1:8888 / webcenter, portal, MyPortal1, attributes ]

  OR

  Sign in to your personalized Portal (say MyPortal1)

  http://127.0.0.1:8888 / webcenter/Portal/MyPortal1

  Click the settings (e.g. Pages & portals Actions)-> manage-> all settings

  It will take you to the page view of all of the current portal (i.e. MyPortal1).

  Then click attributes in the left pane, and you can create/edit/delete the custom attributes for the current portal on the right side.

  • Click Add an attribute and specify the following information:

  Attribute name = myvar

  This is the attribute that we will refer to any page using the EL "MyVar".

  Attribute value = #{param.myvarval}

  "Myvarval" is the name of the query parameter (i.e. suffix query param & myvarval = TestSuccess will be passed as part of the URL later)

  • Now, create a new page "TestPage" and add the element of HTML markup on the page using the composer.
  • In the Properties window, change the HTML markup element.

  Replace the existing value

  #{componentExtensionBundle.OUTPUT_TEXT_TEXT}

  with

  #{spaceContext.currentSpace.metadata.customAttributes ['myvar']}

  • Click apply and then click OK to close the pop-up window.
  • Click on save and view Portal

  
  

  • CHECK: Replace/change the URL the following OR open in a new tab in the browser

  Http://127.0.0.1:8888 / webcenter, portal, MyPortal1, TestPage ? myvarval = TestSuccess

  and you will see "TestSuccess' message in the"TestPage"rendered using the HTML markup component.

  This confirms passing the parameter to a page URL works as expected.

  Now, to add a link to the "TestPage" passing a parameter in the URL of the page in another page (Home Page say).

  • Now goto homepage, correct it in composer and add the hyperlink element. Click change to set the hyperlink in the Properties window.
  1. Set the title to display (i.e. the value of the title TestPage)
  2. Set the Destination URL by clicking on the search icon and choose "TestPage".

  Destination is defined with values that resembles

  /faces/Oracle/WebCenter/page/scopedMD/sf5926dd1_9e6a_45ab_a99c_d79fabb362c0/Page1.JSPX

  Add a suffix '& myvarval = TestWorks' to him.

  • Click apply & OK.
  • Click on save and view Portal
  • CHECK: Since your home portal or the home page, click on the link "TestPage" which brings you to the TestPage and you will see "TestWorks' message in the"TestPage"rendered using the HTML markup component.

  I hope it helps.

  References:

  How to pass a parameter of argument the query URL to a parameter input workflow? (Doc ID 1545808.1)

  https://mosemp.us.Oracle.com/epmos/faces/DocumentDisplay?ID=1545808.1

  Works with the global attributes in portals

  http://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_attrib.htm#WCADM11701

• How can I move these indicator and the control to another page?

  How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

  Or I want to hide them Kontrol page, how can I do

  Thank you

  Hi q8.

  move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

  Hide: Terminal controls (!) right click, select "hide"...

• Run the report to PL/SQL with the branch to another page

  I have an application which, at various times, I run a PL/SQL procedure to perform an action, and then we must run a report while also navigating away from the current page. The actions are performed on a button click.
  
  I tried several methods, but for the life of me cannot get the system to do the two things (ie. run the report and the direction to another page). I tried to put in page 0 (to be executed after the treatment on the click of a button) a branch with a request line to print the report, followed by a branch to the other page (also to run after the treatment on the button click) - and only the branch page 0 runs in fact. Also tried a branch to the other page only, with the print in the request parameter request - but only runs the report, do not create a branch to the other page.
  
  I also tried to put the call to run the report in the PL/SQL code, using utl_http.start_request (url), but that came with a "Bad Request" error. Also tried to use the owa_util.redirect_url call, but also no chance.
  
  I'm pulling my hair out at this time, especially because I am under pressure to get the system in very short time.
  
  Any suggestion would be appreciated.

  You can run queries report of their URL (f? p = & APP_ID.: 0: & SESSION.: PRINT_REPORT =)

  So one approach would be to
  The button click, call a JS function which
  

• 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
  
• 2 open the report in a popup (from your IR page)
  
• 3 redirect leaves the IR page to another page?
  ------
  Another approach:
  
• 1. IR report submits the page
  
• 2. in the PLSQL block, you do the treatment
  
• 3. the branch redirects to a URL that would point to the report URL.
  OR
  
• 3. do you have a JS onload which runs only when demand is demand for BUTTON and opens a page that points to the report.
  ------

  Still another way is to use htp.p in PLSQL block which made the treatment of workflow
  So your code PLSQL

  BEGIN
    --Do the workflow processing here
    --End workflow processing
    htp.p('');
  END;
  

• An undeclared as global element value can be used in another page?

  4.2.1
  
  Hello
  
  If I have an P1_Select element that is a selection list. When the user selects a value, it runs a classic report in the same page that has a hyperlink to another page. When the user clicks on the hyperlink, it opens a new page that has a report and will use the value of P1_Select.
  
  My question is can I just use this value as a variable binding to Page 2? Or should I pass this value to an item hidden in two page when you set the link on the column of the report?
  
  The element P1_SELECT maintains state on several pages?
  
  Thank you
  Ryan

  When you set an item session state value and move to other pages, you can use this value.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Passing a value of item to another page via the button set to redirect to the page

  Hello

  I'm new to APEX and I develop an application to manage Oracle database user accounts.  I have a (8) page that has text elements for the user name and the database name.  I have a submit button (this works very well) who deliver... the ALTER USER statement to reset his password and unlock the account.  I have another button that if:

  1. get the value of username - P8_USERNAME
  2. assign to an element of application - FIND_USER_IN_DB
  3. redirect the page application - page 11

  The issue is that FIND_USER_IN_DB does not get filled and page 11 which is a simple report with the following query:

  SELECT *.

  OF valid_db

  WHERE username =: FIND_USER_IN_DB;

  How to achieve this?

  Thanks for your help.

  Steve
  

  A page redirect is actually nothing more than the rendering of an anchor tag or call apex.navigation.redirect. The link provided by these is generated when the page is rendered. Thus, when the page is rendered (in charge) and P8_USERNAME session state is NULL, then the link will be an empty value. There is nothing sad about the fact that when you change the value of the element on a page that session state will not change automatically and it's just about understanding session state.

  Let's say that you will present the session before the redirection if status point. Would it change anything? N ° the link, as I pointed out, has already been made, and no substitution of session state not be made on a redirect.

  You'd better be off by submitting the page via the button instead of a redirect. This will set the session state of your object to the desired value. You can then use a branch to redirect to the correct page setting the value of an element whose state of session of P8_USERNAME. You can even choose to use a process or a calculation to set the value of the application instead of by a link element, so that you can keep the application not manipulable by the user element.

• Passing the value with coma inside to another page

  Hi all, need your help.

  I have trouble to clarify how to pass value with coma to another page.

  For example, I have a P2_NAME field: with the current value: Test, name

  When I'm passing this on page 3 I get only from Test. I do not understand why, but I do not know how to deceive the APEX?

  var url = ' f? p = & APP_ID.:3: & SESSION.: NO::P2_NAME: "+ $v ('P3_NAME');

  Window.Open (url, "name", "height = 600, width = 800, toolbar = no, directories = no, status = no, menubar = no, scrollbars = no, resizable = no, modal = yes");

  Thank you very much

  Andrei

  Hello

  This might help

  2.5 understanding URL syntax

  List of values of the element used to define the session state in a URL.

  Item values cannot include settlers, but may contain commas with backslashes.

  To change a comma in a value element, place the characters with the backslashes. For example:

  \123,45\

  Kind regards
  Jari

• Passing parameters from one page to the OFA to another PAge of the OFA

  Hello
  
  I was wondering, if there is a possibility of passing parameters to the request from one page to another page in EBS (eBusiness Suite).
  I tried to use the following
  
  (a) PageContext.putParamater ('MyParamater', 'ParamaterValue')
  (b) I have addded above the line of code by extending a controller on the page of OAF and personalized page
  
  When I retrieve the value of getParameter() on the next page. I am also unable to access the parameter in the following page.
  
  I tried the above code while trying to create expenses in the module I have costs... I would like the ReportHeaderId from one page to another page for customization purposes. I am not able to get the ReportHeaderId in the ReviewPAge... There is no Business Objects in the review page... try the idea of putParameter.
  
  Any help will be much appreciated
  
  Thank you

  Yes, the value will remain unless the root AM is released or remove you it with oapagecontext.removeTransactionTransientValue ("myParam");

  Glad to hear it works for you! Also, please mark your messages as helpful or correct answers as it will help others.

  Thank you
  LC

• Passing a value of ITEM to another page (java popup)

  I have an interactive form that displays data based on query.
  
  For example.
  Page 1
  Select a, b, c from test1;
  
  element of a, b, c values would be P1_a, P1_b and P1_c, respectively.
  
  I created a link to c field. When I cliicking on the link up a window
  and redirecting to another page.
  
  I then run a separate application on the new page 2 as follows.
  
  Select x, y, z with x = test2: P1_a;
  
  The problem is nothing is displayed and no error no is shown. The pop up successfully
  to get up, but no data is displayed.
  
  How to pass the: P1_a value of page 1 on page 2 for the query to work?
  I have to explicitly set it elsewhere? I thought that this is already done.
  
  Thanks in advance for your time,
  ANON
  
  Published by: Anon on August 17, 2009 19:56

  Try to use a collection. This always works for me... simple and neat.

• How to manage the attribute date, passing the parameter from one page to another

  Hi friends,
  
  I want to spend attribute data from one page to another page-
  
  I'm passing as below, in the log window jdev I get error below.
  String StatusUpdateDate = row.getAttribute ("StatusUpdateDate");
  params.put ("StatusUpdateDate", StatusUpdateDate)
  Error (121.50): incompatible types. found: java.lang.Object, required: java.lang.String
  
  
  Suppose that I'm passing as below, while moving from one page to the other, I am getting error in the application below
  String StatusUpdateDate = row.getAttribute("StatusUpdateDate").toString)
  Date of update of State - Houston-25009: failed to create an object of type: oracle.jbo.domain.Date with value: 26-MAR-2009
  
  Please you can suggest me how to handle this error.
  
  
  Thank you and best regards,
  Vandenplas

  Hello

  Vandenplas

  you're right, this method is to launch error, which is why I got, bcz timstamp is also not implmenting Serializable interface, is there he throwing error at run time

  u just go this way

  another page of request-Destination page Controller-Process-

  Add a new line below the following line

  DATE StatusUpdateDate = (DATE) pageContext.getTransactionTransientValue ("StatusUpdateDate");

  String stringStatusUpdateDate = StatusUpdateDate.toString ();

  and also in your AM CODE

  change your method like this

  public void testselection (String Name, String Email, String product, the string, String StatusUpdateDate)

  hope this will solve the problem

  thanx

  Pratap

• Set the value to the field on another Page

  Hello

  I'm still a little new to this, through forums, that I managed to learn a lot of things. But I met another difficulty. I have

  I created a form in LiveCycle with two pages. On page 1, the fees are calculated by multiplying Field1 * Field2 and by adding the value of another. I managed to accomplish this with the following code:

  This.rawValue = Field3.rawValue + (Field1.rawValue * Field2.rawValue)

  As I said, that seems to work.

  To Page 2, I have a drop down list with five options. In the object > value tab I checked specify point values but has not changed a thing. If the value of the option range from 1 to 5.

  When option 5 is selected I want to set a value for a field that is Page 1. I tried with the following script:

  If (this.rawValue = 5) {}

  Page1.positionedSubform.field3.rawValue = 149;

  } else {}

  Page1.positionedSubform. Field3.rawValue = 0;

  }

  I'm now writer at all, but it seems to work somehow. Not that I want to :-).

  When I saw the PDF that it auto sets the value of Field3 and the drop to 149 field.

  I want to first Field3 on page 1 to 0 by default (entered in the object > field value tab 3) and set it to 149 if you have selected the option with the value of 5 in the drop down list on page 2.

  Any ideas?

  (Sorry for the bad explanation, don't know how to explain it better is if)

  Hello

  Did you use the calculate event in the drop-down list? If so, move the script to the output of the dropdown event.

  Niall

• To access the APEX_COLLECTIONS on another page

  Use: APEX 5

  One of my app pages (Page 12), I have a dynamic action that calls upon request AJAX callback process.

  The code of the dynamic action has the javascript call:

  var arr_f01 = [];

  () $("input[name='f01']:checked").each

  function() {}

  arr_f01.push ($(this).) Val());

  });

  (apex). Server.Process

  "Lines Checked process."

  {f01: arr_f01},

  {the data type: 'text',}

  Async: false,

  success: {function (pData)}

  $s ("P12_SELECTED", pData);

  }

  });

  The recall AJAX process is:

  Controlled process lines

  declare

  l_f01 varchar2 (2000);

  Start

  APEX_COLLECTION. () CREATE_OR_TRUNCATE_COLLECTION

  p_collection_name = > 'TEST_COLLECTION');

  l_f01: = ";

  delete from lrg_symptoms_select;

  because me in 1.APEX_APPLICATION. Loop G_F01. Count

  insert into lrg_symptoms_select values (APEX_APPLICATION. G_F01 (i));

  l_f01: = l_f01 | APEX_APPLICATION. G_F01 (i) | «, » ;

  end loop;

  APEX_COLLECTION. ADD_MEMBER)

  p_collection_name = > 'SPLIT_SYMPTOMS ',.

  p_c001 = > l_f01);

  Select c001 in: l_f01 of APEX_COLLECTIONS where collection_name = "TEST_COLLECTION";

  HTP.PRN (l_f01);

  commit;

  end;

  I have 2 questions here:

  1. After this process, I call a modal dialog (Page 9) page at the click of a button. The modal dialog box is to have an area of report that is supposed to display the data of this APEX_COLLECTION

  Select c001 in APEX_COLLECTIONS where collection_name = 'TEST_COLLECTION';

  But I get the following error
  

  Failed to parse the SQL query:

  ORA-00933: SQL not correctly completed command.

  How can I access the collection on the page of the modal dialog box?

  2. the value of the page (P12_SELECTED) in dynamic action element is not visible in the session state.

  The value is displayed on the page but when I check it in the session, it is null. Also when I pass this value to another page, it is delegated to as NULL.

  How to set the value of page element in the session?

  Thanks in advance

  Hina

  844372 wrote:

  Update your forum profile with a recognizable username instead of "844372": Video tutorial how to change username available

  I have 2 questions here:

  1. After this process, I call a modal dialog (Page 9) page at the click of a button. The modal dialog box is to have an area of report that is supposed to display the data of this APEX_COLLECTION

  Select c001 in APEX_COLLECTIONS where collection_name = "TEST_COLLECTION";

  But I get the following error

  Failed to parse the SQL query:

  ORA-00933: SQL not correctly completed command.

  How can I access the collection on the page of the modal dialog box?

  Remove the ';' the query.

  2. the value of the page (P12_SELECTED) in dynamic action element is not visible in the session state.

  The value is displayed on the page but when I check it in the session, it is null. Also when I pass this value to another page, it is delegated to as NULL.

  How to set the value of page element in the session?

  Set the value of the element in the recall process and use it as the return value:

  :p12_selected := ...;

  I can't integrate it in your code because I don't understand. Why the TEST_COLLECTION is created and used in a query, but the data added to the collection of SPLIT_SYMPTOMS?

• How to pass the variable to bind page ADF view object

  Would appreciate your help on this.
  Set up a view with a variable binding object: param1 in where clause.
  I want to pass the value of the variable to link from a page of the ADF (.jspx)
  
  I know that one Option using executeWithParams() method binding in the ADF page.
  But, I want to pass a pageFlowScope parameter (which is already set when loading the page) to the variable binding VO, and the VO should also display the results filtered on the page the first time itself.
  
  Could someone help me understand with a code, how to achieve the same. (Is there a groovy expression to access the param pageflowscope?)
  
  Thank you
  
  Published by: user5381160 on August 12, 2010 20:01

  You should also consider dragging operation executeWithParams on your workflow and of wiring to occur before your page instead of in the definition on the page itself - so it is more clear what is happening and is the approach recommended for 11 g applications. When drag-and you - drop operation, you can use the dialog box bind the parameter to your page flow - scope variable by providing the good EL there.

  There is no expression Groovy in the model layer to access the workflow variable scope page (which is in the controller layer) because this would violate the separation of concerns inherent in an MVC application.

  John