Password administrator or power on password

Help me please guys administrator password or power on password disabled sistem 52677428

@Art1k

Please enter:

43755408

Kind regards.

Tags: Notebooks

Similar Questions

  • 15-f009wm reset administrator or power on password HP laptop

    Laptop HP 15-f009wm we are locked will require a readjustment administrator or power on password

    have tried 3 times and the '77305999 off system' is the result. Any suggestions on what to try next?

    Try > > 68063319

  • 11 - n010dx: password administrator or power on password

    cut computer and now when I turn it on it ask password administrator or power on password after 3 trys I get system disabled with the 51185144 code please help

    @Chilly_Willy1

    Enter 44883180

    Kind regards

    DP - K

  • "Enter the password administrator or power on password"

    "Enter the password administrator or power on password"

    Hello

    Try to enter: 31762234

    Kind regards

    DP - K

  • Pavilion: password administrator or power on password

    Hello

    My laptop asks a "password administrator or power on password" (I forgot my bios password).

    The code is 73433702.

    I looked on the Internet and found your site.

    Thanks in advance for your answer.

    Jeremy

    @Jeremy83

    Please enter

    62591324

    Kind regards.

  • HP model 15-1039wm: I have the same question to enter the password administrator or power on password.

    I have the same problem enter password administrator or power on password. Disable the 68253840 code shows. I tried to participate get the battery cmos as suggested on other Web sites, but it's hard to disassemble. I used the enemy months laptop then use more than a week and now this message. .

    Hello:

    Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

    http://h30434.www3.HP.com/T5/notebook-operating-Sy...

  • HP CORE i3: help! Blue screen that says: enter the password administrator or power on password

    Help! Blue screen that says enter password administrator or power on password. It never imagined before, and I can't go to any other screen. It gives me a disabled system number 50986581?

    Enter 45684507

    Kind regards

    DP - K

  • Flow: Enter the password administrator or power on password

    Stream of my mother-in-law is now inviting to enter "administrator or power on password password.  To my knowledge, he never has been on this computer.  After that three did not try a disabled system [I 68924215] message appears.  Y at - it solution to get beyond that?

    Thank you!

    Hello

    Try: 77682831

  • 2000 - 239DX: enter the password administrator or power on password

    Hi, I have a laptop HP 2000-239DX. I had not used my laptop for a while and when I turned, I enter the password administrator or power on password. I tried all the options password I can find on the net, but nothing has worked, the code I get when it says disabled system is 53134944. Is there a code I can use to get rid of this Bios password and get back to using my laptop? Thank you very much and enjoy the rest of your day

    Try the spider.

    42892380

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • HP laptop I think: password administrator or power on password

    I got a laptop HP from a friend for down payment for rent. But when I turned it on I got a message saying enter password administrator or power on password. No matter what I have try finally returns to the disabled system 77695412

    @Valentine1206

    Enter 68793434

    Kind regards

    DP - K

  • laptop Hp WIN8 2000: enter the password administrator or power on password

    Hello, can someone please help me
    I have Hp 2000 Notebook pc win8, not his to
    Enter the password administrator or power on password: deactivation of the system 67240918

    Help, please...

    I found my answer here http:bios-pw.org/

  • HP Pavilion P106: Enter the password administrator or power on password

    Hi I'm "password administrator or power on password" on the dialogue on a laptop.

    HP Pavilion 106

    error code after 3 failures of password: 52765272

    Thank you

    Try to enter

    43643874

  • HP Mini 210-2145DX: lost administrator or power on password

    I lost my administrator or power on password to a laptop running Windows 7, don't know if it's a 32 or 64-bit, a HP Mini 210-2145DX.

    Immediately after turning on, it asks, then said, disabled system [50988573].  It is before the Windows splash screen.

    Any help would be MUCH appreciated.

    Thank you!

    KE

    That made me initially, but is it possible to get the password to connect to the home screen?  Thank you!

  • "HP 2000: enter the password administrator or power on password ' [New]

    Hello

    Im getting the "password administrator or power on password: 99339585 error code when I start my laptop Hp.»

    It's so frustrating! Any help would be greatly appreciated.

    Thank you

    Paul

    @ploder11

    Enter 26091501

  • Re: password administrator or power on password hp pavilion g6

    This is an old post but I know can someone help me... I have problems in my hp laptop. It asks me to enter the password administrator or power on password. It also returns "System disabled" with the code 63473444 after three failed attempts. Is there any code I can enter to enter?

    Hello:

    Enter the unlock code...

    72551480

  • HP Vision 2000: "enter the password administrator or power on password' pop up immediately at startup to the top

    I get 'administrator or power on password password' jump to the top of the screen immediately on startup, the password is lost, and when I'm entered in what I thought the password could be 3 times I had this code - 54667991

    Help, please

    Steps to follow:
    1. use the posted above unlock code to access the BIOS
    2 disable all passwords that are enabled
    3. If the request for current password - enter the unlock code
    4. for the new password, simply press the ENTER key
    5. repeat the same thing to check the password column.
    6. then exit the BIOS saving & output option to save the changes.

    Troubleshooting:
    Incase if the password does not work please try a Hard Reset as follows.

    1. power off the laptop

    2 disconnect the power adapter and remove the battery

    3 hold the Power button for 30 seconds

    4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad

    5. If now see you a password, please enter the same password I've shared before and press on enter

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on 'white Thumbs Up' on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

Maybe you are looking for

  • Direct printing of WIFI in Samsung Galaxy 3 Smartphone for a range of printers HP 8630

    I have a HP 8630 printer connected to my local network via a wired connection.  The printer works fine for computers on the same network with the printer.  What I call the 'normal' network I also have a Samsung Galaxy 3 smartphone using Android softw

  • Pack and unpack to a folder

    Hello Pack and unpack a file using zip, tar, whatever, 3-party libs like zipme, junzip does not work. Can all give a demo code simple and executable that you use now, thanks in advance. http://supportforums.BlackBerry.com/T5/Java-development/how-to-c

  • System Windows 8 Installation error unhandled thread exception

    Have tried to install windows 8 pro with the same result, still getting same error mentioned above. system becomes earlier installed windows 7. Ask for help

  • Trail Replicat GoldenGate to several databases files

    HelloCurrently, I have a database SOURCE (extract/pump) and TARGETdatabase (replicate).  Is it possible that I can add an another TARGETdatabase and using the SAME trail source files to replicate to this new database?  If so, how he used?Thank you in

  • created and last_ddl_time are not correct

    4.1beta: the query to retrieve the stats is not correct, as using "rownum = 1" instead of use the object_typetest case:Select * from user_objects where type_objet = 'INDEX' to order of creation;Object_name: PK_DEPTCreated: 31 October 14Now, create a