Password at startup TECRA R950

Similar Questions

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Tecra R950 - 16L - display sometimes dark rest under tension

  Hello

  I have a Tecra R950 - 16L for about 3 months now, everything works fine. Since a few days, I now the problem that sometimes, especially after I transported the laptop before, the internal screen is black after that I turn on the laptop.

  Blindly, I can type my password and see the disk activity that windows probably begins, but none is displayed.

  After I move the laptop and shake a little sometimes it works again and the computer remains work until I move the laptop again (at least this is what seems to make the effect occur).

  Seems to me like a connector loose on the screen or something like that?

  Is it possible to fix this on my own?
  I need my cell phone all the time and do not want to send it for repair if it is not not 100% necessary.

  What do you suggest me?

  Michael Czierwitzki

  > Seems to me like a connector loose on the screen or something like that?

  Yes, it seems that there is a bad connection or maybe something wrong with the sensor cover.

  > Is it possible to fix this on my own?
  I don t think so.
  You would need to check what's wrong exactly. Once this has been verified, you would need to disassemble the laptop and it's not easy. Finally and above all you need compatible parts to replace the affected hardware I put t would think that you can do

  > I should I my laptop all the time and do not want to send it for repair if it is not not 100% necessary.
  Well, you could ask the Toshiba authorized service provider for details and how long such repair would take.

  You will find here all the FSA all over the world:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Need to remove the password on Toshiba Tecra A8 BIOS

  Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

  Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

  You must send in a center of Service from Toshiba for password removal. There's no other way.

• Tecra R950 - Blackscreen

  Tenho um Portatil TECRA R950 - 186 PT53OE, com o operating system Windows 10. Vinha com o SO Win 7, posteriormente actualizei-o para o Win 8 e recently para o Win 10.
  Depois o driver para a versão 10 mouse muito bem. Significativamente better than com a versão 8.1.
  HA ideal dias fiquei sem imagem no display. Seja o ecra preto com or.
  Quando ligo o computador e perfectly is a dinna mensagem: TOSHIBA Leading Innovation >, mas depois fair fico com o ecra preto.
  Tenho trabalhado com ele ligando-lhe um monitor external to porta SVGA.
  JA fiz an atualizacao do driver da placa grafica, mas o problema persists.
  Agradea§o me seja uma Solução apontada.

  Try this:
  uninstall the display driver in Control Panel.
  Run Windows Update to install the new display driver.

• Tecra R950-15F - need to WiFi disabled by deafult

  Hi all

  I'm new to the forum and I have a question whose answer
  I couldn't find on the web and here in the forum (at least with my keywords; please direct me if failed).

  For some time I am owner of a Tecra R950-15E running Win7 Pro 64-bit and am very satisfied with it.
  The only thing that bothers me a bit is the Wi - Fi mode.
  I know that by pressing "FN + F8" I can turn the wireless (WiFi and 3G) modes on and off.

  It seems that by default the wireless modes are turned on after starting the system.
  I would like to have everything turned off by deafult (primarily to conserve battery power) and only turn it on manually when I really need.

  Now I have to do the reverse by turning off manually after the system starts and I have not found a setting to change to my preference.

  Does anyone have an idea to fix it?

  Thank you
  tecra14

  I m very surprised of your question here in the forum, because usually the laptop / system must remember the last State of Wi - Fi.
  This means that Wi - Fi should remain disabled, in which case the WiFi has been disabled just before logging off the power.

  Try reinstalling the driver WLan just to check if it would solve your tiny issue.
  You will need to uninstall the WLan driver before you start a new installation.

• Tecra R950 fan speed

  Hello

  I have Tecra R950 (PT530A - 00S 001) and find that the fan works almost full/high speed all the time.

  I am running Windows 8.1 and run on the balanced power setting.

  Is it a common problem with this model?

  Someone can give me some info or measures to be taken to diagnose the problem or should I just send it to Toshiba as a guarantee?

  Any help would be appreciated.

  Hello

  I wouldn't say it s common issue because of fan activity depends on its portable use.
  The fact is that the CPU/GPU performance leads to a temperature higher due to the dissipation of the heat and this leads to a stronger fan activity

  There's not a lot of parameters that could be changed next settings in the Windows Advanced Power Options. Here you can change the method of cooling under operation on battery and you can also decrease the max performance of the processor to 100% at a level more down to let's say 80-90%

• Tecra R950-104 - can I replace ODD with SSD?

  Hello

  Is it possible to replace my DVD drive with an SSD with a HARD Drive Caddy?

  My laptop is a Toshiba Tecra R950-104.

  Kind regards

  Luis

  Hello

  I found on the internet some UltraSlim SATA HDD/SSD mounting frame that allow the use of 2nd 2.5 HDD/SSD drive instead of ODD in Notepad Tecra R950 but to be honest I m not 100% sure if the BIOS recognize such additional device.

  I know that computers Toshiba laptop (Portege and Tecra) series different takes in charge these updates in the past but this replacement was not supported by each laptop model.

  It depends on the BIOS and in the event that the BIOS recognize the 2nd HDD/SSD drive, the system should be able to recognize 2nd HARD drive

• Tecra R950-104 - memory expansion

  Hello

  Can I install 16 GB of Ram in my Toshiba Tecra R950-104?

  Currently, I have 8GB and I would like to replace the existing one with 2x8GB 2x4gb.

  Best regards

  LRP

  Hello

  According to tender specifications that your Tecra can scale up to 32 GB and you can use modules RAM 4 X 8 GB.
  Compatible RAM 8 GB memory modules have PA5037U-1M8G part number.

• Tecra R950 - touchpad suddenly stopped working

  Suddenly, my Tecra R950-F0036 touch pad not working (Serial No.4D027959H purchased in South Africa).

  I tried all the usual options like update the driver.
  The driver seems to be there, but FN F9 does nothing to turn on the pad.

  Any ideas on how re - activate the touchpad?

  I don't know what OS you use, but check it please state of the material. Check please the Device Manager and check touchpad is listed there and active properly.

• Upgrade HDD/SSD 500 GB on Tecra R950-19th

  Hi all.

  I would like to know if it is possible to upgrade (buy and then replace) my HARD - SSD (256 GB) drive to a 500 GB/1 TB on my Tecra R950-19th.

  If so, you have online stores to suggest buying?

  Thank you.

  I think that it should be possible to use this HARD drive since the SATA controller is able to manage these sizes because of 48-bit LAB (Logical Block Addressing)
  Usually there is no big difference between HARD drive manufacturers, but I recommend you to check some reviews and read some article on HARD drive, you are interesting in.

  What you need is a SATA 2.5 HARD drive (speed is not question for the compatibility of devices)

• Disk failure HARD Tecra R950-104

  Hello

  I have a Toshiba Tecra R950-104 with almost a year.
  Everything works fine except the HARD drive.

  In this period (almost on the year), I got 2 hard drive failure (hdd 2 had to be replaced!).
  Fortunately the issues occurs within the warranty period.

  Y at - it problems with this machine, about the drive HARD (it's a 500 GB, 7200 RPM Toshiba HDD).

  Thank you

  Hello

  HARD drive problems do not portable but depend on the use of HARD drive and use of portable.
  The HARD drive is a wearing part. Sooner or later every HARD drive was going to die.

  This problem can occur because the HARD drive is affected by shocks while moving the laptop. In addition, there a lot of different hard drives on the market. Some are less expensive because of the low quality and some HDD cost more because of good quality.

  If you keep the eyes on the quality of the HARD drive.
  But to be honest, I would never buy a laptop HARD drive. I replaced my HARD drive with an SSD. Its much faster and more sustainable as a HARD drive

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• WLAN Driver works do not (Tecra-R950-116 PT534E-00E00CGR)

  I'm stuck with installing the driver WLAN Notepad mentioned above on our image of 64-bit Windows 7 preconfigured.

  It seems to be a combined WLAN and Bluetooth Card (Atheros Wireless AR9485WB-EG). Unfortunately, the problem is complicated by the fact that the model is NOT in the data base of Support from Toshiba. Perhaps because it has been customized to measure for our Organization.

  If neither "autodetect my model" or enter the serial number on the Toshiba support work, gives just "model not recognized." Not very professional.

  After putting the Image on the laptop, there are 4 unrecognized devices in the Device Manager.
  One is titled the network controller, 3 are more unknown.

  I downloaded the home page of Toshiba Atheros driver.
  It installs without error but peripheral is always displayed non-functional in device Manager.

  In the Forums from the Toshiba Support I picked up the end to install the filter of BT first driver package, but did not help.
  I tried 3 third-party drivers. There was a constant error "Access Violation" or "file not found".

  I did not save the Image of the laptop came with.
  You spend your recovery media order would lead to large administrative overhead because it takes the credit card or payment in advance.

  Anything more I can do?

  Here are the Toshiba PC Diagnostic output:
  -----------------------------------------------------------------------
  Date of 2013-05-08 09:27:25

  [Information on PC]
  Model name TECRA R950
  Part number PT534E-00E00CGR
  Serial number XC064089H
  Version of the OS Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
  Version of the BIOS Version 2.20
  CPU Intel Core i5 - 3210 M CPU @ 2.50 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 320,070,320,640 [bytes] 298.089 [GB]
  Video Intel (r) Graphics HD 4000 version = 9.17.10.2884
  Screen resolution 1366 x 768 Pixels
  Version of Intel 82579V Gigabit Network Connection = MAC address network = E8:E0:B7:B2:7: 66
  No modem
  The IDE Device 1 Hitachi HTS543232A7A384 FW version = ES2O
  2 IDE devices MAST * a UJ8B2 DVD-RAM
  ....
  Internet Explorer 9.10.9200.16540

  PS-MICOM Version «»

  [Information QFE]

  CPU TEST DOES PASS
  NETWORK (1) TEST PASS (Intel 82579V Gigabit Network Connection)
  Host controller - 1E2D)
  COL DUE to TEST (7) USB (Intel (r) 7 series/C216 chipsets USB Enhanced Host Controller - 1E26)
  TEST of USB (8) SWITCH (USB root hub)
  TEST of USB (9) FACT PASS (Generic USB Hub)
  CD/DVD TEST (F:\) SKIP DRIVE-
  ...

  Hello

  The laptop supports map of WB225 WLan Atheros b/g/n including the BT feature.

  The Atheros driver for the Toshiba UE driver page should be compatible:
  [Wireless Lan Driver v 9.2.0.489 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 241 & selProduct = 7562 selSh ortMod = 3563 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 5 & ID = 82924 & OSI D = 30 & driverLanguage = 42]

  You must pay attention to the function of BT, to install the driver WLan, then Atheros BT filter package and then the Toshiba BT stack in order to get the work BT and Wlan.