password for my media center window?

Similar Questions

• Promo for the Media Center Windows 8 code

  I have not had ANY knowledge or information about the Windows 8 Media Center free Promo code that expired January 31, 2013.  Is it too late for me to get a free promo code for this?  I bought my new laptop in December 2012.  Answer please!

  Yes, unfortunately, it's too late to get the promo code to use. He had to be asked and activated by January 31, 2013.

• How can I add Hulu Plus for my media center menu?

  Windows media player

  How can I add Hulu Plus for my media center menu?

  Hello mjcraner,

  I suggest watching this thread, because it is similar to your request:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-TV/can-i-get-my-Windows-Media-Center-to-add-my-Hulu/e775da98-2a82-E011-9b4b-68b599b31bf5?tab=MoreHelp

• Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

  I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP.  I did a clean install of Vista, which resulted in my remote no longer works.  It runs on my laptop. But the contoller stopped working in Media Center window.  And it does not turn off the computer.  So basically so that Vista runs the remote is useless.  I hope that someone a lot smarter than me can help you.  I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution.  Someone has an idea?  This problem is fixable?

  Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."

  It can show the unit.

  Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa

• When I put my my tv signal on media center window, it is a problem and says unavailable tuner.

  Why don't the conflict viewing and listening will leave and why's my tuner available on media center to windows

  When I put my my tv media Center window signal, it is a problem when it saids tuner unavailable. Five minutes earlier the tuner worked when I did it the first time. (Missed installation the first time, I had to do it again) Then when I click on tv live or the tv button it saids there is a conflict viewing and listening. When I click on Yes for on the trip, it keeps on poping up and doesn't go away. I tried to reboot, but it does not work. I have windows vista and norton spyware these problems. In addition, I don't know where to look to find what type of tv tuner I have.

  Hello pgarv,

  I suggest you look at this post on the Windows Experts. Their question appears to be similar to yours:
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114/p/90118/458995.aspx

• Download for xp media center 2005

  I need to reinstall XP center media, 2005. I lost my disk but have the COA and the key code. Is there a download for XP media center 2005 everywhere?

  Hello

  You will not find legal downloads for it.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• After loading xp sp3 on Media Center windows restarts then stop blue screen error: 0x000007E (0 x 0000005, 0xBA268756, 0xBA4C33430, 0xBA4C312C)

  After loading xp sp3 on Media Center windows restarts then bsd * stop: 0x000007E (0 x 0000005, 0xBA268756, 0xBA4C33430, 0xBA4C312C)

  Hi Rick Amsbury,

  Follow the steps in the article.

  How to solve an error "Stop 0x0000007E (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) code error" in Windows XP

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• Windows media center, windows 7, not the guide data...

  Windows media center, windows 7, data Guide download ok, but never populates the list of guide and it keeps saying theres only 3 days of the left guide and downloads, this is again without success?, ive tried uninstalling and reinstalling media library, ive tried to run task to reset and re race, its installation, nothing works... This is a new laptop with windows 7 installed on it, and its been updated to the latest updates...

  coincidence - the issue of the UK guide has supposedly been set yesterday
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/23/t/103680.aspx
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Am running windows 7 ultimate and my media center window does not work and my system is looking for a solution but that's all!

  I had put my storage system for a little while, now still use it once I have to improve everything that I think that's it at one point, now I got problems, watch videos of any source with continuous buffering, stop and start the content. I had posted a question on this topic and got the answer, not finished it yet, it error C0000135 envolved. Is it possiable that they are all connected to C0000135?

  Hello Stephen,

  1 is this problem limited only by working with Windows Media Center?

  2. are you C0000135 error code of Windows Media Center?

  3. do you get an error message?

  Note: Before going any further I recommend to transfer the files to a secure location on the computer.
  This will remove also all your recordings programmed, so you'll have to re - schedule them.
   
  Method 1. Rename the ehome folder.
  
  a. right-click on "computer" and select "Manage".
  b. under "Services and Applications", you will see 'Services' Open 'Services' and stop "Windows Media Center Scheduler Service" and "Windows Media Center Receiver Service".
  d. rename the directory "C:\ProgramData\Microsoft\eHome.
  e. start the service "Windows Media Center Service Launcher" (this will start two other services properly).
   
  See also:
   
  Playing videos in Windows Media Center: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/playing-videos-in-Windows-Media-Center-frequently-asked-questions

   
  Method 2:
   

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Provide more information so that we can help you.

• need to drive replacement for xp media center edition 2005 operating system

  Computer crashed. active hard drive & ok. virus taken flight. Computer came with XP Media Center 2005 and Office already installed. It's a HP Pavilion. HP sells more spare parts because it is more than 5 years old. Where can I find an another disk operating system? Don't want to lose Office. Not too worried about anything else.

  burn the Hiren s cd in order to get at least to the desktop, you need to do is to look at the drive in disk management and see if a second partition is listed on the player, that would be the recovery partition.

  If a recovery partition is not displayed, you can use hiren to repair the registry:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-missing-or-corrupt/a1cf7ecf-e6c8-4546-AB88-f0e5abde7a13?msgId=52ff9278-5721-4B37-8887-700e274493b8

  read the response from Wunders for instructions on repairing the registry hive.

  But first traveled with the parameter/r hiren checkdisk, instructions are in my reply with download the hiren.

  EDIT:

  http://www.faultwire.com/solutions/using_system_restore_xp.php

  Here's a site with pictures on using the recovery console to repair the registry scroll down to the section for the recovery console

  Here are the instructions to burn a bootable cd with the recovery console, you do not have installation cd.

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  you will need to burn the cd from a working pc

• Internet wireless for HP Media Center m1264n

  I have a XP m1264n Media Center running. I used a wired Internet connection since I got the computer 8 years ago. Now I have a new computer and want to move the old one away from the router. This computer has the capacity of a wireless internet connection? If this is not the case, is there a kind of card I can get to make it capable of a Wi - Fi connection.

  Thank you

  Joyce

  802.11 is a wireless standard. It has nothing to do with the PC.  All you need is a free USB port.

  If you have XP with service pack 3 installed, any USB wireless adapter which has drivers for windows XP should work just fine.

  I used the maps on many PC XP desktop USB wireless.

  http://en.Wikipedia.org/wiki/IEEE_802.11

  Don't forget that you also need a wireless router or wireless integrated into your cable/dsl modem.

• Xbox 360 connects to Windows Media Center (Windows 7-64 bit)

  I can't get my Xbox to connect to Windows Media Center.  When I ran Vista it would work, but now that I am on Windows 7, 64-bit, it just does not connect.  The strange thing is that I'm able to share media from my PC to the Xbox without fail.  In addition, Windows Media Center has detected the Xbox on the network.  But for some reason, the Xbox cannot find the Windows Media Center.  It makes no sense at all.  I even tried disabling the Windows Firewall to see if it would work, but it didn't.  There is no other firewall in my home network.  Help, please.

  Hi Imautobot,

  You may need to configure the Xbox extender for Windows Media center for Xbox to work.

  Step 1: Get the key Setup of Xbox 360
  1. on your console, go to my Xbox, and then select Windows Media Center.
  2. follow the on-screen instructions.
  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer
  1 start Windows Media Center.
  2. click on tasks, and then click Add Extender.
  3. When prompted, enter Xbox 360 8-digit setup key.
  4. complete the configuration of the Extender.

  See the links below: connect your console to the Windows Media Center: http://support.xbox.com/support/en/us/nxe/xboxlive/troubleshooting/NetworkHelp_mcxpc.aspx

  Enjoy Windows Media Center on the Xbox 360 with your music, photos, Live Recorded TV and online media: http://www.Xbox.com/en-us/pcsetup/MCEWindows7.htm

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/tutorials/Extenders-Xbox-config.aspx

  Set up a Windows Media Center Extender unit: http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender

  Tips for solving problems with Windows Media Center Extender Setup: http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why did I lose the mouse in the onfull for the media center screen

  When I enlarge to full screen in windows media center I lose the mouse.

  Hi William,.

  Please provide answers to the following questions.

  1. what operating system you are using on the computer?

  2. are you aware of any material changes or software that have been made before the show?

  3. for how long are you facing this problem? If it works well before?

  Method 1: Enable and disable Windows Media Center

  Turn off:

  a. Select the button 'Start', then clicking on the "Control Panel".

  b. Select the menu "Programs" and then "Turn Windows features on and outside."

  c. find the "Multimedia functions" menu and uncheck the 'Windows Media Center' tab click on 'OK' to complete the process.

  Activate:

  a. click the start menu and choose default programs

  b. click the item named Set Program Access and Computer Defaults

  c. choose the custom configuration

  d. in virtue to choose a default media player option, make sure the box to the right of the element of Windows Media Center that is labeled enable access to this program is checked

  It will be useful.