password not required for internet access

Similar Questions

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• Why my application requires "full Internet access.

  I create a built-in apk for GooglePlay with Adobe AIR version, and my application requires "full Internet access. I did not indicate this requirement of authorization, but it seems, why?

  An application built in Flash or Flex, works on 'AIR' in Android, does not run in native mode and how to connect 'AIR' with Android, is via a local network, while permission 'Full Internet access' is to allow a local between AIR and Android connection, Yes, I know it's silly, but it is so.

• Unique password on SAA for VPN access

  Hello

  It is posibble create a unique password on SAA for VPN access?

  I googled a bit and found a few solutions with unique servers from other suppliers.

  I wonder if this is possible without additional hardware/software.

  Hello

  you will need to integrate the VPN with the RSA. they will give you once the configuration of the password tokenized soft or hard token.

  Outside of RSA, there is no other choice I guess.

  I hope this helps.

  Kind regards

  Anisha.

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• Password not recognized for the new Gmail account

  My gmail account ID / password is not recognized by Thunderbird. It worked, but somehow it has suddenly stopped working (not able to receive or send emails and just make an hourglass whenever I select any folder in the account).

  Some other details:

  . I use Thunderbird 38 (could the upgrade caused the problem?).
  . I tried to remove and re-add the account. It connects fine, but does not recognize the username/password.
  . I did some Google 2-step of checking is turned off.
  . I deleted the Google Contacts.
  . I checked that access for less secure applications is disabled in Google (even though I believe that Thunderbird 38 should not require this).

  I followed all the steps I find Google search, including the https://support.mozilla.org/en-US/kb/thunderbird-and-gmailsite. Nothing seems to help.

  I'm up a Creek. I like Thunderbird (use it for multiple e-mail accounts), but hair pulling try that it works - and it takes too long. Any suggestions?

  Thank you.

  account15:
  ENTRANTS: account15, (imap) imap.googlemail.com:993, SSL, OAuth2
  OUTBOUND: smtp.googlemail.com:587, SSL, passwordCleartext, true

  You will need to set OAuth2 authentication for the SMTP server as well.

• Is there a stand alone version of Premiere Pro does not require an internet connection to use?

  I am video creation for a Scout troop and a large part of the time that there is not internet where we camp. So, I'm looking for a version of first as the old version of CS6 I can use without having access to the internet.

  No PP versions require an Internet connection to use on a daily basis.

  A one month subscription to will have to check once a month to check the subscription.  If you buy a year both a third full, you can go up to 3 months without checking it in.

  So unless these are long reeeeally camping trips, I think you're fine with the latest version of PP and I know that you are better off with 2015 as CS6 ergonomics point of view.

• setting up my VM PC for Internet access

  HI -.

  I just downloaded the latest demo version of VMware Fusion, enabled with the serial number temporary supplied and installed XP Professional. The platform is a relatively new Mac Mini running the current operating system. My Internet access is through a DSL modem/router which requires a system of client and enter a serial number from 10 numbers as a key.

  I don't seem to have access to the Internet on my PC of VM. I'm pretty new to do something meaningful on Windows; can someone tell me how to configure it to access the Internet? I just need to be headed in the right direction; I am sure that I have all the configuration information that I need.

  Thank you.

  mzimmers wrote:

  upgrading to SP2, and SP3 instead of directly to SP3.

  I would never install SP2 on a clean install if SP3 was the ultimate goal that it is a waste of time and I will not talk about other things.

  You should look into creating a slipstreamed SP3 for future facilities .iso image.

  Take a look at: Slipstreaming Windows XP with Service Pack 3 (SP3)

  Do you want to get this test anyway? I don't know what he's going to tell us now, because I don't have a virtual machine without Internet access.

  No, it is not necessary since you have Internet connectivity in Windows XP.

• On iPad 3 no wifi connection page don't pop up for internet access

  Since iOS 9.3.4 update for my iPad 3, the login page popup usual to connect to the internet to Starbuck, Panera or in local medical facilities does not come to the top.  No problem with the wifi at home or a facility that does not require you to click "agree."

  Please take a look at problems joining the Wi - Fi networks that require the display of a redirect page in iOS 8.1.2? Check your settings in "AutoConnect". This could be your problem. The update may have changed this logic.

• What password is required for connectivity to my wifes on the network computer?

  Of my wife and my machine is connected to the router Ethernet.  I get this message and have no idea at this stage what password is requested.  She uses Win 10 and I am on Win 7.  internet connection issue basic I know but I'm not aware at all on these issues.  Thank you.

  cannot post a picture here is so going to try describe the message.

  up: enter the network password

  the following line: "enter your password to connect with: MOM.

  Then the box: my computer name and the name given to the router

  the next area: request password

  the next box: "use another account.

  I tried every password I have for the system and computers with no luck. both machines are identified as being a "home network" with all the options set to 'on' password sharing and selected 'Off '.   any ideas?  Thank you

  To remove the network password, you must change the settings where the network was setup. To do this, connect your PC to 10 Windows and follow the steps below:

  1. Open the Control Panel.
  2. Click network and Internet.
  3. Click network and sharing Center and change advanced sharing settings.
  4. Click on all the networks and scroll down to password protected sharing to change the setting.

  

  Let us know how it went.

• IPv4 NAT in IPV6 for Internet access

  Advanced thanks.

  New Internet transport is incoming.

  IPv4 and 6 addresses are available for use.

  A notion exists that any V4 address assigned to we were able to be used elsewhere and is, therefore, a security risk potential (I have trouble understanding this fear. Please do not hesitate to comment be it).

  He is asked if it is possible to NAT the address private to a supplied bracket V6 public address range.

  I've read so far no indication that this is possible.

  If anyone knows otherwise, I welcome your comments.

  Thank you

  IPv4 and 6 addresses are available for use.

  Well Yes.  V6 is more than 50% of the data traffic of cell LTE4 in the United States, more than 40% of traffic in backbone of the Belgium, tends to work better than the v4 for mobile devices, etc.  It's true.  We are in the interregnum of double-internet, where not all clients can talk to all servers, until the transition of the v6 is over 15 years.

  ... no matter what V4 address assigned to we were able to be used elsewhere and is, therefore, a potential security risk

  Because the IPv4 address space is commonly used around the world, most ISP are turning to 'carrier grade NAT' where customers share the overall scope of intellectual to a NAT upstream.  The reputation of the internet of such middlebox will trend down in the most infected client / badly behaved behind it, which is always going to be a zombie botnet.  Could collateral damage to the protocols used by perfectly well-behaved clients that also share the catwalk of the GNC.

  During this time, you can not new the regional internet registrys IPv4 subnets, so your only effective source of additional IP space is to pay for a transfer to someone else.  The transferred subnet was probably already in use and so can be on blacklists to email spamming or have blackhole routes to the backbone of the ISP.  He could have previously also housed nuisance attractive such as banking or services of Paris that are often being DDOSd because of the inertia of the miscreant.  This can take time and effort to clean.

  Recycled IPv4 addresses that are actually working for you are not particularly more at risk than the addresses of archaic origin question from a security point of view; mainly, endpoint software quality-controlled not by mere reputation.

  [it is] NAT possible range of addresses private to a supplied bracket V6 sound

  Sort of.  The usual problem is that a client v6 only (say, a cellphone LTE4) tries to join a v4 service only (for example, a typical business web site).  This requires 6--> 4 translation; for that this week the default mechanism seems to be "464xlat".  The customer gets two v6/64 prefixes, transport v6 only and a private address v4 which is in tunnel on the secondary prefix to a carrier grade NAT64/DNS64 middlebox.

  The inverse problem of a customer only v4 trying to reach the Server v6 only is usually academic; usually you dual-stack to the client instead and there aren't many services only v6, although this will change.

  The IETF has downgraded RFC 2766 NAT - PT for the translation of v4 to v6 historical belonging, meaning it is not recommended for use on the internet in general, in the RFC 4966.  In addition to all the usual problems of NAT, NAT - PT does not work across ISPS due to the inability to get the right DNS46 TTL values.  If you try only translate a small subnet of a single body, say a v4/24, you might be able to find a software that did it, but it's the wrong way to take.

  If the problem is that the customer support not double stack v4 + v6, switch to something produced in this century; even windows XP can be dual-Stack if offer you it DNS on v4.

  If the problem is the ISP offer v6-transport, tunnel traffic v4 across this gap v6 to a double gateway to battery.

  -Jim Leinweber, WI State Lab of hygiene

• Google toolbar is not displayed for Internet Explorer 7

  Will not display my toolbar for Internet Explorer 7.  What can I do to get it to display?

  Hello

  Thank you for writing to Microsoft Communities.

  1. have there been recent changes to the computer before the show?

  I suggest you to re - activate an add-on in Internet Explorer 7 and check if that helps.

  There are some corruptions with Google Toolbar on the computer, I suggest you uninstall from programs and features and re - install the Google Toolbar on your computer and check.

  For any further assistance, I would recommend that contact Google for help on this issue:
  http://support.Google.com/toolbar/?hl=en

  Hope this information is useful.

• TMS 14.3 - PIN is not required for endpoints imersive

  Hi people,

  I am facing a strange with TMS 14.3 + driver problem XC2.2 + TP Server 3.1. This is what happens:

  Schedule us a conference in TMS conductor like MCU, click an alias that points to the server TP conference bridge. The Conference has a self-generated PIN 6-digit. We use the type of conference "No connection", where all participants must manually dial into the Conference and insert the PIN.

  Well, when at the request of conference starts, all participants can join the Conference successfully using ID number and then insert the PIN code. However, for the endpoints imersive telepresence (CTS 3000), when the user dials the ID number, it is connected to the conference without having to insert the PIN, TP Server don't ask the user to insert the PIN, endpoint imersive is automatically connected to the Conference after dialing the digital ID.

  I have no idea why this is happening, and I confirm that this happens only for CTS 3000, the same problem does not occur for 500 CTS, for example, which is registered to the same CUCM with the same version of firmware. Extra points that I realized:

  • This problem seems to be related to MSDS. Because, if I create an alias Chief conductor associated with a model of the Conference which has applied the PIN, so the problem does not occur. All the endpoints are required to insert the PIN, 3,000 CTS. But when planning through TMS, the problem occurs.
  • The problem happen if the CTS 3000 is selected in the list of participants when planning or not. In addition, no matter if the CTS 3000 is the first, second or last member to join the Conference, the problem always happen in any time.
  • No matter if I use Conference alias set of a driver to be "imersive" in configuration of TMS or alias of the common, the problem still occurs.
  • In the web page of the server TP, I can see the Conference he indicated "PIN protected" information

  Everyone here knows about a problem like this before?

  I'd appreciate any suggestions really.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  CDETS ID is: CSCum29993.

  VR

  Patrick

• Components required for Oracle Access Manager

  To replace our current SSO solution, we were asked to migrate to Oracle Access Manager.
  
  In order to install Oracle Access Manager, there are some dependencies from a point of view RCU.
  
  I'm trying to find out if Oracle Identity Manager must be installed with Oracle Access Manager - so that the OAM correctly configured?
  
  Thank you

  That's true when Oracle Identity Manager is a required precondition for Oracle Access Manager and, therefore, the need for the Oracle Identity Manager schema must be installed both in time of creating repository?

  Yes.

  Thank you
  Hussein