Password required to connect to the computer (via a switch)

Similar Questions

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Palm TX connects to the computer via WiFi for Hotsync

  I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.

  My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?

  Here is my Wifi Hotsync help file:

  WiFi HotSync with a TX

  1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

  2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

  3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

  4. turn on the Wifi on your Palm and you connect to your router.

  5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

  6. tap the HotSync icon big above the IP address and hang in there!

  7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

  On your TX, check these settings in the drop in Hotsync:

  Modem Sync: network

  LanSync: LANSync

  Network configuration: (Wifi should be listed as one of the networks)

  WyreNut

  Message edited by WyreNut on 02/11/2008 10:59

• HP psc 5520 does not connect to the computer via the wireless

  Hello
  Recently I have not been able to print or scan anything using my laptop.

  Laptop computer and printer are connected wirelessly to my home network but when I try to set up the printer with a wi.fi connection, the laptop computer does not find the printer. I tried to do it with the hp software and windows options.

  If I connect the printer to the laptop via USB, everything works fine.

  The printer is only 2 months old and I'm getting a little frustrated, I'm totally lost here.

  Please help me

  If you need more information just ask.

  Thank you very much for this information.

  Were you running a power cycle on your router, the computer and the printer? Still, the IP address is all zeros? Please let me know!

• iPhone not charging when connected to the computer via USB

  Original title:

  I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

  Hello

  1. are you facing problems with USB devices?

  2. that you get an error? If Yes, what is the exact error message?

  3. is your phone detected in iTunes?

  4. doesn't Windows detect the iPhone as storage medium?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Run the hardware troubleshooter and check the issue.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to plug it into a different USB port and verification.

  Method 3:

  Check out the following link.

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  I hope this helps.

• I'm trying to view the photos on my pc on my tv samsung, which has a wireless connection to the computer via the router. I spent a lot of time setting up, but it still does not work! Work.

  Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.

  I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.

• How to set the resolution of TV connected to the computer via HDMI?

  original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

  I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

  Hello

  You can see the following article for more information on monitor display problems:

   

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

   

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know if that helps.

• Sony VGP-BMS30 mouse does not connect with the computer via bluetooth

  Hello

  I can't get my laptop Windows 8 to find the Sony mouse!  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  I checked and all the settings are correct. Blue tooth is on and wifi etc...  Packing instructions mouse Sony are for Windows XP.  What is the problem?  It is not compatible with windows 8?

  It's an idea.  A few months ago I downloaded Broadcom.com fresh Bluetooth drivers for my laptop Sony VAIO Windows 7 x 64.  Just in case, because I don't use Bluetooth at all so far.   There is a Guide to Broadcom Wireless Bluetooth in my folder Bluetooth in the start menu, maybe you have also.  You could also ask a Sony VAIO support forum, or even to buy the mouse USB cable is cheaper than you can get up to find a solution for your wireless mouse.  No kidding, without cable you'll need a battery.

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• Connection of agilent E3631A DC power supply to the computer via a RS 232 for labview

  Im trying to access the computer via a cable RS 232 for sully power DC E3631A agilent use labview to operate the instrument. But the instrument is now detected by the computer and when I check instruments instruments connected tools-tool-find, told me no device not connected. I tried to use max by changing the configurations, but so far it doesn't work anymore. Please can someone tell me what to do

  I don't know if MAX is the instruments of automatic detection on the serial port.  You can contact the instrument using Hyperterminal or something like that?  Also make sure you serial port settings are all correct (it is the most common reason).

• Great printer Officejet 7500 a Format to connect intermittently to the computer via the wireless network

  I have a portable printer Officejet 7500 has recently purchased that I would use wireless.  I have an Apple wireless router and am running Windows 7 on my computer.  The printer and computers individually connect to the network, and there is no problem with the router.  The problem is with the connection between the computer and the printer.  I can print things from my computer by sending a file to the printer, but sometimes it works through printing directly from the software.  I tried to scan my computer and the printer, but get the same error at the same time that there is no communication between the printer and the computer.  I suspect that it is a firewall problem, but do not know how to change the settings to allow this communication to occur.  I have the windows firewall and advanced software protective system, but have disabled the windows shield in this software.  Help?

  First of all, download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/printer_diag/&lang=en&softwareitem=oj-106151-2

  What did he say?

  Just to be clear, that the 7500 a is connected to the Airport via radio, correct (not USB)?

  If so, we will define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

• Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6

  good day to you all...

  Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...

  Thanks in advance

  Hello

  Please download the driver from the internet of the HP website steps below.

  1. Go to the web page software downloads & HP driver for your model.

• The HP Elite 8100 desktop: how to avoid having to type the password to connect to the computer

  How can I avoid having to type in my "password" to log on to the computer.  It's annoying to have to type a password every time I turn the computer to use it.   All advice is appreciated.     Thank you

  Hello

  Please go to the section How to skip the login screen of Windows 7:

  http://www.intowindows.com/how-to-automatically-login-to-Windows-7-skip-login-screen/

  Kind regards.

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case