Password requirement: you need to change your iPhone unlock access code within 60 minutes.

Similar Questions

• Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»

  My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not).

  My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to change your unlock iPhone code access in 52 minutes.»  We have never seen this before notifcation, and my sister and I have an iPhone more than 6/6.  I told my father to simply ignore it, but then he kept appearing whenever he has unlocked his cell phone, so I told her to choose continue.

  He chose to continue, changed the password from one to 4 digits long, and then he picked up his phone.

  Restarts, the phone prompts you to put in an access code to the first newspaper in attempt before it allows you to use the contact IDS.  It introduced the new password, but it didn't work.  He tried several times, and now it shows there are 60 minute wait.  At this point, it just goes to continue to put in the access code until it restores his phone.

  Why did this happen first? It has a 5 under AT & T's iPhone with the latest version of iOS.

  The new password longer trying to capture is correct, because when you create the password, it asks you to enter twice, and he could not continue if he does not get it right twice.  So why the code was not working?

  Hello gabemstr,

  Thank you for using communities of Apple Support.

  I see in your message that your dad's iPhone shows an error saying: requirement of password you need to change your unlock code.  It seems that your father has a managed iPhone, with a profile that is installed on it.  When a device is managed, it can have certain requirements for password as an age of access code.  I suggest your dad gets in touch with his staff, or deletes the profile.

  By default, the authentication of the user code can be defined as a six digit on taking devices PIN supported Touch ID or a PIN digit on all other devices. In iOS, you can choose from a comprehensive set of password policy to meet needs of your security. These access policies may include requirements for:

  • An access code on an iOS device

  • An alphanumeric value

  • Minimum length of password

  • Minimum number of complex characters

  • Maximum password age

  Password policies

  1. Delete the configuration profile provided with the application.
     • Go to settings > general > profile, tap on the configuration of the application profile.
     • Then click on delete the profile. If requested, enter your device password, and then press DELETE.
  2. Restart your iPhone, iPad or iPod touch.

  How to remove an application that has a configuration on your iPhone, iPad or iPod touch profile

  Take care.

• I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  I got a notification saying "password requirement: you must change your secret code in 56 minutes"I panicked and entered my access code using the little box? ". I ' t mess up?

  Yes. You may be victim of a scam, except if you are connected to your business with this requirement.

  Change your password immediately below:

  https://appleid.apple.com.

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• I have a subscription to Creative Cloud 3.4.1.181 from 49.99 euros per month. I can't download illustrator, photoshop and indesign DC, she tells me to buy. I need to change your subscription?

  I have a subscription to Creative Cloud 3.4.1.181 from 49.99 euros per month. I can't download illustrator, photoshop and indesign DC, she tells me to buy. I need to change your subscription?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• How can we change the lenses on a VIXIA HF R60? Do you need to change/update the software of the camera?

  How to change or add lenses a VIXIA HF R60?  Just add an adapter lens and screw on the new glasses?  Do you need to change or add software to the camera in order to use the lenses?  The other Canon lenses lenses work?

  Hi retiredsa!

  Thanks for posting.

  The lens on the VIXIA HF R60 is not interchangeable.  Also, this model is not compatible with conversion lenses and adapters.

• Microsoft Antivirus found the activity of critical processes on your PC, you need to clean your computer to avoid the breakdown of the system.

  Message from Web page

  Microsoft Antivirus found the activity of critical processes on your PC, you need to clean your computer to avoid the breakdown of the system.

  Hi Michael

  FWIW, I just see the same message a couple of days, but I remember reading somewhere that some of these messages was an attempt of sites to infestation by malicious software to cause the user to go into panic mode and accept the offer to clean their computer and when you do that, you're actually infect your system ,

  I tried to return to the site, near the site but nothing worked so I did a stop forced and rebooted with no ill effects.

  When restarting my system, I did a full scan and nothing was found.

  Found the article.

  http://www.Microsoft.com/security/PC-security/antivirus-rogue.aspx

  Good luck

• 8 blocked installation of windows to "you need to add your languages in windows 8.

  Hi all

  So I tried to install windows on a computer 8 portable gateway that has windows 7 ultimate. I have a product key for windows 8, but not an installation disc. I used windows on the site Downloader and need the product key but continues to stop at the blue screen "something happened" and it opens Google chrome and going to another blue screen and it says "you need to add your languages in windows 8" on the right is a button 'confirm', but it does not work. " I went into the Panel of control-> system and security-> windows update-> and I've updated all language packs who was there, who took like 3 days. I also clicked on the restore hidden updates and there was nothing there. I can't get past this problem and any help will be appreciated.

  Thank you

  Tim

  So I never found on the forums on how to solve this problem, so I contacted Microsoft support online. I told them that I kept getting the message "you need to add languages to Windows 8" and that they have all been added but would not click "confirm". They have tried, and then eventually told me that I have to do a clean install. I have made an installation disc, restarted the laptop and went in the bios and started with the disc. It was a good cause, I had to wipe the old partitions that used space. Installed and it worked. I ended up spending to 8.1 and after downloading I decided to try to get 10 Windows. I couldn't get the icon to show so I googled this problem and found a way to update without the icon. That and now I have Windows 10. The link below is the page I used, and I hope that this helps someone out there. Good luck.

  http://www.InfoWorld.com/article/2954362/Microsoft-Windows/you-don-t-need-the-Windows-10-free-copy-icon-anymore.html

• "You need to add your languages in Windows 8.

  When I tried to upgrade to Windows 8 Pro, he said "you need to add your languages in Windows 8. I have Windows 7 Ultimate. I use a CD disc and that's what I tried, I went on the Start button, typed language, press "install or uninstall display languages" and press on uninstall display languages, there are 3 languages, an English and a Chinese (Simple and tradition), I uninstalled them both and they both have been uninstalled and I checked it again just in case I uninstalled them both back to the program "install or. Uninstall display languages"and there was only English that it is impossible to uninstall, I also tried and downloaded the program Windows Fix It, it did not show anything on the tongue. I press Refresh on the installer of Windows 8, which brings me to this: file:///C:/$WINDOWS.~BT/Sources/Panther/ActionableReport.html, I pressed the confirmed cases and nothing happened, I pulled out and press refresh and it still says

  "You need to add your languages in Windows 8.", nothing has worked to help please.

  Hello

  Please provide detailed information about your question. I appreciate your efforts to resolve the issue. However, there are a few steps more that we can try to diagnose the root cause.

  This problem could be linked to the modification of system files and Windows components.

  Since you've already tried to uninstall the language packs for Windows 7, I would suggest trying the following steps and check if it helps.

  Method 1: Run the clean boot

  Perform the clean boot that helps determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, follow method 2

  Method 2: Clean boot material

  Unplug all external devices connected to your system (except the keyboard and mouse) and check if it helps.

  You can also perform a clean boot material to deactivate devices and check if the problem occurs.

  a. click Start and in the start search type in "Device Manager".

  b. in Device Manager, disable the items of the graphics card, floppy disk, network card, Modem and sound, video & game controllers.

  c. right-click on each of the devices and select disable.

  d. restart the computer in normal mode and perform the upgrade.

  Note: After the upgrade to Windows 8, you must activate the devices and update the drivers for Windows 8.

  You can also try to uninstall the language packs for Windows 7 and check if you can switch to Windows 8.

  You can see the article upgrade to Windows 8.

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  http://support.Microsoft.com/kb/972813/en-us

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• do you need to check your email before you download cc?

  do you need to check your download of emailbefore?

  You can download the adobe trial version when you want.  If you have an id adobe (email address) that you used to sign up for a subscription to the cc, your email address has already been verified.

• You need to update your Flash Player and enable Javascript to view this content"

  I have recently updated for CS4 to CS6... all my Web Sites & pages still work... But now I get the message "you need to upgrade your Flash Player and enable Javascript" I'm on the last level of Flash Player and JavaScript is enabled?    This could be one that is Version 8 thing? Thank you

  Thanks for the help... I took your clue. Once I saw he worked in Live but NOT design... Who told me my Mgr Extension.   Somehow? DW passed the link to the SSv4_DW_ext.mpx. After I reinstalled it... works very well.   Thanks again.

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.

• What happens when your computer dies and you need to reactivate your applications on a new computer, but you can't turn them off the old computer?

  My computer died recently. I had the right to install applications on two different machines. My new Mac is here and my panic to get back to work by using the CC apps, I reinstalled the on the new machine. Now I'm able to use them on my laptop because I wasn't able to disable out old Mac applications and this is why Adobe think I used my two installs.

  Hello

  You can actually have installed creative cloud and on two computers, signed as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

  Hope this helps

• iTunes message: don't forget you need to update your iTunes account!

  Confirm your account! Dear Member, We have faced some problems with your account, please confirm your billing information, if you do not confirm your account within 72 hours, it will be closed from Permenatly! To update your account, just to confirm your information, it's easy: Click here for the update Click on the link below to open a secure browser window. Confirm that you are the owner of the account and follow the instructions. This is a phishing attempt, do not click on any links contained in. Apple will never send you an email like this story updating you your account. As an aside, Apple company also has a command of the English language much better than that it be made the phishing e-mail. :-)

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck