Similar Questions

• TestStand 4.0 connect password how to reset.

  Hello Teststand gurus, currently I use version 4.0 of teststand. I put the newspaper of the administrator password for the last 2 weeks and I forgot the password. Is it possible to reset? Thank you guys.  Newbie here.

  Stop TestStand

  Go to C:\Program NIUninstaller Instruments\ and click on the folder Cfg

  Remove Users.ini

  Restart TestStand

  He must recreate the file Users.ini.

  WARNING: You delete all users of this machine.

  Kind regards

• From the LabVIEW check that TestStand application isn't running

  I have a machine running a TestStand program to test. I want to write an application in LabVIEW to move files over the network to my machine TestStand. In the application before making the transfer of files, I need to test to see if TestStand is running and if it is, I want to close it with my request. If anyone can help that would be great.

  It is not clear whether your TestStand runs on a remote computer.  I think it is, but if not you can just taskkill it.  If it is not running, then it will return an error that you ignore.

  You can still use it on a machine on the network, but you need to change the command line function to provide the system/s, the field / u, and user and password/p.

• Cannot connect remotely TestStand engine-17851

  Have had some strange behaviour tries to run the remote call in sequence. It works on certain combinations of PC, others do not! Ex.: A to B (and vice versa) works, C to D also works well, but has to C or C to A or B to D comes with the mistake-17851. As each station works at least with one partner, I expect that all the DCOM settings and configuration of remote engine are ok. This PC is on the same network, the same group, same configuration I see. TestStand version is 3.5 on all machines. Same Windows-TS-User and on all stations.

  Any idea or experience?

  SOLUTION FOUND:

  There must be a user who has logged on to the remote computer administrator privileges (as mentioned in the reference manual) and - very important - there must be a password set for these users.

  If a user without defined password logs on, Windows blocks all access remotely.

  Thanks for your support!

• Password, property

  Is there a way to get the password for 'managed' TestStand?

  Password, property

  Syntax

  User. Password

  Data type

  String

  Goal

  Specifies the password for the user.

  Remarks

  When you set this property, TestStand scrambles the password before storing it in their own country. When you get this property, TestStand returns the password encrypted for you, to prevent users to programmatically access passwords without authorization.

  Thank you

  Brian

  I see the Enigma.  They are not willing to allow the currently logged in windows user to connect to TS? You may just have TS connect automatically to Windows user.

  Another option is that if you work in an environment where they have badges and then you can analyze their badge number.  It's a little safer.

  The last option and that you'll probably have to implement, is to create your own dialog box in LabVIEW or another language.  Then in this language, check the resistance of the password.  Then, once they get finally a 'good' password then you go ahead and set in TestStand.  You would create your own system of user right management dialogue here.  There is an example of deleting to create here: \Examples\CreateDeleteUsers\CreateDeleteUsers.seq

  It might be useful to start.

  In any case, hope this helps,

• Why TestStand change my movie file

  Hello everyone,

  I see something new all of a sudden.  We have five different clients that are available for operators to use files.  Two of the files were made by a work colleague and the other three by myself.  Lately, whenever the operator ends with one of my co-workers file and load one of my friends is a ' * ' after. SEQ"in the tab.  Please note that all five of these files are protected and no one can change the password file.  As the operator has not received absolutely no privledges.  So when he tries to close the file, they are greeted with a dialog sequence editor that indicates of course that they "you have insufficient privledges for saving this file. Closing now will reject changes in the file.

  When I try the same thing, but running as an administrator, I get a different dialog that requires "the file xxxxxxx.seq is changed because of automatic conversions that TestStand performed during the loading of the file.  Save changes? ».  It also shows and ' * ' after the name of the template on the bottom of the screen.  When you try to close TestStand, you are greeted with an another "Modified files" dialog box, which shows the Client file and the Model.seq.

  Why is-TestStand making automatic conversion on something than theorectically has not changed since the operator cannot do things it would cause?  The patterns in the model are independent of each other.  Is there a way as in Labview, when the library caught from another place and advise you of the fact, in TestStand I'm able to see what is happening.  My fear is that I save changes A) that won't go away and seems like that B) will cause harm to the client file and cause the production, time that I can't afford.

  Thank you for reading and sorry I'm very long in this message.  I can't wait to hear from some of you with you thoughts and direction in the understanding of what made this conversion.

  Kind regards

  Scott

  I think that this change type of ReportOptions comes from the ATML Toolbox. Your colleague has perhaps the ATML toolkit installed. In any case, what I said in my previous email should always work. I recommend either putting the version of the type you want in a palette file type or re-record all files with the version of the report type options you want.

  Deleting and time the reminder reportoptions as you described are just to get rid of the use of the new type and its replacement by the old version (i.e. the parameter of the callback is an instance of the ReportOptions type). If you can do it everywhere it is fine too, but an easier way to get the same result is simply the version of the ReportOptions type desired in a palette of type file (for example MyTypes.ini). Then when you load a file with a newer version of the type, teststand will warn you that there is a conflict of type and you can choose to solve using the already loaded type (i.e. that of the pallet type you want). It's probably a good idea to keep that desired in a range of type to avoid the unintentional use of the wrong version of the type.

  Hope this helps to clear things up,

  -Doug

• Is it possible to disable selective module TestStand cards?

  Is it possible to selectively disable adapters module of TestStand? For example, to configure the TestStand development environment to only have the LabView module adapter available for developers.

  Husni h wrote:

  Thanks for the reply. Is the permission to change the cards under the privilege of config adapter? How can we TestStand be installed when the user accounts are for example pre-configures administrator account by default with a different password than white and the default developer with the off adapter config privilege privilege?

  You can install the custom file users.ini if you wish after you are done editing. It is located in the directory cfg teststand.

  Hope this helps,

  -Doug

• TestStand 4.2 string not found error in the language resource files

  I installed the TestStand 4.2 on two Windows XP computers.  On a machine it worked fine first time. On the other machine, I get the following message if poster in the login box and also in the component models: ' String not found in language resource files. "I tried uninstalling and reinstalling TestStand twice but you still get this error.  This error is preventing me from being able to log in as administrator, so I am unable to use TestStand 4.2. I understand that these language resource files are supplied by the installer, but for some reason, it seems that the machine with the error cannot locate these.

  The only difference between the two XP machines I can find is the location of user profiles.  I note that on versions of TestStand compatible Vista, that TestStand user settings are stored in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all the user profiles are stored in C:\profiles, instead of C:\Documents and Settings.  This is the standard profile used by our company so I am not able to change that. TestStand Setup recognizes this and install for C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\ TestStand user parameters.  Does anyone know if the location of user profiles is important, or if there is another cause of this error?

  Kind regards

  David

  David-

  The cause of the channels being found is probably at the first launch of TS, the language files are not found. The language files contain default values, and these values are kept as actual values during the recording of the configuration files. For example, the default administrator name and the default folders in the Insert palette. I would recommend that you delete the file Users.ini and Templates.ini in the configuration directory and this should address your current behavior. I don't know why the connection appeared a problem because I was able to use the blank password on the user 'String not found in language resource files. If you still have problems with the connection, let us know.

  You remember something unique about how you came to this situation that caused this to happen?

• TestStand user names

  Hello

  I would like to know where the user names and passwords are stored in teststand, so that I can copy the same file to a version update of teststand.

  It's just to know.

  Thank you

  Krishna

  Hey Krishna,.

  They are stored in the file Users.ini.  It is located in the directory Cfg in your folder TestStand.  So, something like this: C:\Program NIUninstaller Instruments\TestStand 4.1.1\Cfg.  They changed the Cfg folder location in recent versions of TS.  In addition, the recently changed to a txt file in a binary file, so I don't know how portable it will take place from older versions to the latest.

  TS, you can go to configure > Station Options.  Then click User Manager.  Uncheck the default box, and find the old Users.ini file.  If it works, then you can remove the old one and hover over another in the Cfg folder.  Then recheck the default zone.

  We have a Users.ini file on a shared drive and point to it all our test stations.  Then, we can just edit this shared copy and all stations to see.

  Hope this helps,

• Update password

  After changing my password recently whenever I sign in this forum the autofilled password (I guess that's my old man) and I wonder to enter my password, but then I have to go and find my "other devices" and enter the digital access code... How can I change the password so I can't go through this any time, can you?

  Roger

  Can try this...

  Open Keychain Access utility, then check the password on this point, change, or delete it and start over.

  You can have duplicates.

• iPhone is disabled and ask for password for restore and backup

  my iphone screen is showing that the iphone is disabled and asking the password for restore

  I tried several times but each time the process, says need to access code for iphone restore

  pls advise.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• How can I disable the password on my ipad with ios 10.0.2

  I don't have an access code unlock setting under "Settings": "General"?

  It is not under settings > general, it is fair to settings > password:

  

• Every day someone is trying to connect my Iphone. Do I have to change my password every time?

  Every day someone is trying to connect my Iphone6. Do I have to change my password every time? How can I stop this?

  Your post says that someone is trying to connect 'on' your iPhone 6 - have - they possession of the phone or they try to connect your Apple from another device ID?

  Note also that there are a number of phishing scams that send e-mails that appear to come from Apple, but are not current. Do not use any links in these emails if you are not.

  If they are trying only to log in instead of sign in successfully it would be not necessary to change your password. However, you can consider on for Apple ID - Apple Support two-factor authentication or frequently asked questions about check in two steps for Apple ID - Apple Support (if available) for more security.

  If they are correctly connected, see: If you think that your ID Apple has been compromised - Apple supports

• Photos in the camera roll on 'iPhone' cannot be imported because the iPhone is locked with a password or read

  6 + put iPhone updated to 10.0.0.2 and now get the error, the pictures on the Filmstrip on "iPhone" cannot be imported because the iPhone is locked with a password or read. You must enter your password on the iPhone to view and import them.

  Working solutions proposed so far. Guess I'll have to wait for the correction of a bug to Apple...

  iPhoto 11 (9.2.3); OS X 10.6.8

  On the alert to "trust this computer" on your iPhone, iPad or iPod touch - Apple Support

  LN