Paste my function no longer works. Turn it off. I can't right click and paste or control c. What should I do?

I was able to copy / paste with no problems until today. None of the functions copy or paste work no matter how I use them. If I pointed out and use the C command or if I right click it shows copy but will not display the function paste. V control does nothing. nothing shows up on the clip board either, so it is really a problem copying. Thank you

Hello

Does the problem occur with all programs?

If the problem occurs with all programs, and then follow these steps:


Step 1
: scan Run SFC (System File Checker) on your computer.

a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
c. at the command prompt, type the following command and press ENTER:
sfc/scannow

For more information, please refer to this Knowledge Base article: How to use the tool troubleshooting missing or corrupted System File Checker system files on Windows Vista or Windows 7


Step 2:
check if the problem occurs in a new user account.

Refer to this article for help:

http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

Tags: Windows

Similar Questions

  • HP Envy 100: Scan function no longer works on my printer

    Recently moved locations and had to re set my PC. Since then the scan function no longer works. I get the error message 'Scanner reported an error', 'Impossible to log on to the device. I've uninstalled and reinstalled the drivers from HP, I checked the internet connections and all work. Actually had a lot of problems earlier with the printer and the scanner re wireless connections but hoped to have finally overcome these.

    Is not part of the problem, but a real complaint about what is the purpose of wireless devices when they never work as well as the peripheral ethernet connected, someone really need to get it sorted .

    Can someone help me please to get my back operational system. I surgent now as it is on paternity leave and need to get some issues administrative doen at home in the next few days.

    Thank you very much

    Hello HevnLgh.

    The problem is now fixed and the printer and the scanner work. Don't know exactly what corretced it if it took time for the steps previously mentioned to kick but I also tried to use the wi - fi protected installation set-up that exists on the printer and somewhere between all these steps, the connection between the pC and the printer has been restored.

    My very kind thank you for your efforts. I click the congratulations and accept it as a solution.

  • Start menu not having closed option (a virus turned it off), which can do to recover this option?

    I got a virus, got everyting back, except the Start Menu option to turn off. What can I do to recover the option stop?

    Here is some useful information to frequent contributor on these forums Jose Ibarra (slightly modified):

    If you see things like this:

    You do not have sufficient security privileges to restore your system.
    The System Restore tab is missing from the my computer properties.
    System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
    The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
    The task manager has been disabled by your system administrator.
    The registry editor has been disabled by your system administrator.
    The task manager has been disabled by group policy.
    The registry editor has been disabled by group policy.
    The command prompt has been disabled by your administrator.  Press a key to continue...

    Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

    If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

    No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

    If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

    These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

    Before making any changes to your registry, back up the registry with this free and popular tool:

    http://www.SnapFiles.com/get/ERUNT.html

    Open Notepad to create a new text file:

    Click Start, run and enter in the box:

    notebook

    Click OK to open a new Notepad file.

    Copy and paste the following lines of text (those in bold) in the new Notepad file.

    [At least in earlier versions of the registry editor, it was necessary to have a blank line at the end of the file (an extra press of the "Enter" key).  I don't know if this is still necessary, but put it in any case. It won't hurt.]

    Windows Registry Editor Version 5.00

    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
    "DisableTaskMgr" = -.
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
    "DisableRegistryTools" = -.
    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
    "DisableCMD" = -.
    [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
    "DisableTaskMgr" = -.
    [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
    "DisableTaskMgr" = -.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
    "DisableCAD" = DWORD: 00000000
    [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
    "DisableConfig" = -.
    [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
    "DisableSR" = -.
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
    "NoRun" = -.
    [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
    "NoRun" = -.
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
    "NoClose" = -.
    [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
    "NoClose" = -.
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
    "NoSetTaskbar" = -.

    Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

    enableit.reg

    After you save the file, close Notepad.

    Locate the file enableit.reg on your desktop and double-click it. (Or right click and select Merge.)

    Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

    Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

    You should then see a message that information has been registered in the register.

    Reboot your system and test.

    You can delete the enableit.reg file when you are finished.

    If the registry editor has also been disabled, we first fix (not a problem).

    Follow up with this:

    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
  • Windows Explorer has stopped working error - I can't right click a folder on the desktop.

    This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

    Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

    We are volunteers here for the most part.

    It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

    But now they way they choose to turn things around here.

    Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

    When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

    If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

    Download ShellExView here to see what Explorer extensions you have loaded:
    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
    Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

    Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

    If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

    You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

    You can Google something like:

    Windows Explorer crash

    You must complete your suspect on behalf of adds on.

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

    Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

    You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

    If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

    When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

    The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

  • I no longer have a "delete" key/tab on my page of e-mail, I have to right-click and delete items individually. Where at - it go? I would like to but it back!

    I changed probably inadvertently something, but now there is no function of deletion on my mail page, so I can't click just a little dot or s/t next to the messages I want to delete, I right click and delete the item individually. Thanks for your help.

    See photo

  • A movie for relaxing family viewing. He was not assessed and looked like a family-type movie. Not 5 minutes into the film, that we realized that the language is offensive we so turn it off. Can we have this deleted rental and choose another movie?

    A movie for relaxing family viewing. It was not evaluated and which seemed to be a good family movie. Not 5 minutes into the film, we have made the language is insulting to us and turn it off. Can we delete this movie rentals and choose another?

    Contact iTunes Store Support.

    Contact info varies by location, but you can find it at the bottom of the web page of the iTunes Store.

  • my shortcut function no longer works

    I have an Inspiron (dell), the windows vista pc. I used to have a feature called function "create shortcut". All I would do is make a right click on a page link / I want on my desktop at the start, and a box would pop up asking me "do you want to put this link (ex: www.amazon.com) on your desktop? Then I click Yes, and then he... Don't know what happened, but it no longer works.   Does anyone know how to get it back? It was so easy and useful.

    Thank you!

    Hi MarshaGriffin,

    ·         What happens when you try to create the shortcut?

    ·         Did you made recent changes on the computer?

    ·         What version of IE are you using?

    I suggest you try the methods mentioned below and check if it helps.

    Method 1: No detection system file checker (SFC).

    http://support.Microsoft.com/kb/929833

    Method 2: Try to create a new user account profile and check.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If the problem is resolved by the above method, then you might have a corrupt user profile. Follow the article provided to fix the damaged user profile.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  • JavaScript function no longer works on Playbook

    I have an index.html page that is linked to several other pages html (back and forth). They have all of the following functions in them. It worked perfectly, when I had 4 pages [got the javascript popups and browser open link], but as I added more pages (now 7), this kind of has stopped working.  My index and the pages loads properly but when I click on the button/image to open the browser, the application crashes, no pop ups + no browser. When I tried the pages on my webbrowser on laptop, I get my pop up windows...

    I'm fairly positive that a 1 Ghz Duo processor Playbook can handle a MB 6 App...

    Anyone know what I'm doing wrong?

    UH... my email client no longer works so I restarted my playbook.
    Strangely, after restarting my app work now...

  • Control parental is not allow me to play Grand Theft Auto 4, and I can't find a way to turn off the parental control. What should I do?

    I tried to remove the parental control, since I put in place myself by a mistake, and I would remove it. How can I do this?

    Hi Emil,

    We are happy to help with your concerns about the parental controls on your computer.
    Parental control works only on a non-administrator account. First, you log on to your computer as an administrator. After this, please follow these steps to remove parental controls on your computer:
    1. If you set up Parental control by using the control panel
    a. click Start, type Parental controls, and then press ENTER.
    b. Select the user who is under parental control.
    c. Select disabled, and then click Ok.
    2. If you set up Parental controls with parental controls
    a. connect to http://familysafety.microsoft.com using the parent account.

    b. click Manage list of the members of the family.

    c. Select the child's account, and then click Remove. Click delete to confirm.

    d. open the parental controls on your computer client.

    e. on the upper right side of the parental control window, click the icon to get the latest settings from the Web site .

    f. you can also uninstall parental in case you do not have access to the account that is used to configure the settings. You can follow the steps in this link.

    Please let us know if you need more information.

    Thank you!

  • cannot cut a right click and paste

    I play farmville and I want to be able to right-click on a mystery egg and copy and paste the addy in my IM and send it to friends on my game. When I click right I do not get this option. I do not know how to tackle this someone has an idea how to activate the right click to copy or cut and paste for this? I've also tried CNTL C and V no good...

    Hi shelikesink421,

    Farmville using flash player and flash player you do not have the ability to save the image on your computer and therefore, he will not be able to do.
    However you may need to contact the support of face book to check if you can do

    The site probably cannot give you permission to copy and paste on your messenger.

    Have you tried other websites? If so, what was the result?

    Try to copy it to the desktop and check what's happening?

    If successful, copy it from the office and try to paste on your messenger.

    Try right click on the egg that you mentioned, copy and paste it on your messenger instead of Ctrl + c and Ctrl + v.

    Aziz Nadeem - Microsoft Support

  • Satellite U300 - keyboard shortcut functions no longer work

    Recently, I had a problem with Norton 360 and used their online support, where they take control of your computer. The agent was able to disable certain functions, including functions such as Fn + F4 - hibernation access key and also to disable the drop-down menu at the top of the screen indicating the functions of the keys when the slider is at the top of the screen, or you make a Fn + function Fnumber.

    Although turn it on to Norton, I've been several times, they seem unable to reactivate these functions.

    No idea how to do that, anyone?

    Hey Buddy,

    I put t know what support does exactly Norton, but in your case I would reinstall Toshiba Value Package added. This package controls the keys FN and Flash cards that you can see if you press a FN key.

    The latest version, which you can download here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I hope it works for you! :)

  • On WRT54G2 v1 wireless function no longer works

    Only the wired PC works.  Two other laptops cannot take up any signal from the router.

    I tried flashing the new FW, reset, reboot, electric bicycle.  The router does not even appear on any PC.

    I put this router with WPA 3 months ago and worked perfectly... now deceased.

    What more to do?

    Finally managed to do work this way:

    1. On a preliminary step, has updated the firmware downloaded from this site
    2. Connected to the router via a wired LAN cable
    3. Connected to the configuration @ 192.168.1.1 page
    4. Went to one of the tabs to reset to factory settings
    5. Changed the password by default SSID and administration, WPA security and password adding value
    6. Starting my PC with the wireless turned off
    7. Opened at the request of wireless connection of PC and delete the old router connection profile
    8. Turned on the application of wireless connection on the PC
    9. Immediately saw the router THAT SSID is listed again in networks 'Beach '.
    10. A through the configuration screens to specify the security type, and password
    11. Bingo!  I'm back on.

    Better I can understand, something happened that has corrupted the configuration of the router and prevented him from associating with the PC wireless or assignment of IP addresses.  The reset settings this clears up and me got home.  Both my laptop connect now perfectly once again, quickly and @ 18Mbps!

  • GUI volume and function no longer works

    Volume GUI does not show, probably because of the function keys to control volume does not not (Fn + F11/F12)

    It stopped working after the installation of the hate iTunes

    Windows 7 operating system

    Is there a way to restore this function as it is very useful?

    Apparently iTunes had deleted ATKACPI driver and hotkey-based utilities. Today restored and functional.

  • Upgrade to version 1.2, phone function no longer works correctly...

    After the upgrade to version 1.2, when I call or receive calls, the speaker is completely silent until and unless I chose the speaker. I tried to turn the appliance works again, but still the same problem. It's a huge problem, as you can imagine: the phone works as a phone more...

    Just find it once again, this is what has been proposed.

    To fix it, simply pause the music sheet in the headphones, re-enable music. Then pull on the helmet. He will start working properly

    Original post has some other suggestions as well

    http://forums.Palm.com/Palm/board/message?board.ID=webossoftware&thread.ID=220&view=by_date_ascending&page=8

    Message edited by tagz on 09/30/2009 12:05 AM
  • EventListener ('click', function () no longer works

    I worked on a script that has hundreds of radio buttons in groups, and the groups are on the tabs.  They have worked very well and work all my event listeners.  I even created for the loops to reduce the number of listeners, I need but I need 1 loop for each group, so I think I'm overwhelming Illustrator because they have suddenly stopped working together.

    Is there a limit to how many event listeners can have?  Also is there a limit of line of code because I'm already up to 1406 line and I've got to way to go, I do a script to put an end to all the scripts for the company I work for has all the options and can do whatever they want in the same place.  I would post all the code, but it continues to launch error m5 and I don't know if its part of the issue of the names or if it's just for a long time.

    How about you, you start with a table at the beginning of your building UI, like: radio buttons var = [];

    And, whenever you make a new button to add to any location, you can set the button to this table.  Once completed, the window of your user interface, you can now go through your custom table and not by the window UI elements.

Maybe you are looking for

  • While the iCloud recovery backup... continue to go back to the screen HELLO?

    I am currently trying to reactivate an iPhone with the last backup to iCloud. The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...

  • Satellite P200 - Power Saver in XP does not

    Hello I decided to make another thread so that questions can be answered. Right, so I installed Power Saver Driver, then reboot and then I install Power Saver, but when I try to access it from Control Panel I get a message saying 'CANNOT be opened be

  • iPad ios 9.3 update problem

    Updated my ipad ios 9.3 this morning. The YouTube app disappeared. Went to app store to download again and it appears with an "Open" button as it is already on the ipad, but does not have the button 'open '. Already tried the restrictions under attac

  • cannot connect on the start page, as the owner.

    computer froze on the star page. cannot connect as an owner.

  • don't know what it

    When I run my scan, my computer screen turns off and I have to type any key to bring the back of the photo, or else it will stop completely. How can I prevent cela happeneing? or is this a question I should ask Toshiba? Thank you.