pause button on the front panel

Similar Questions

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.

• Is there a way to put a button on the front panel only when clicked gives a pop-up dialog box with more information on it?

  Hello world

  The simulations that I create are very simple themselves but are intended to use in the classroom to help students learn more about the proven theory.  I hope to be able to place a 'help' or 'other info' button on the front panel that rises wants more info on theory, they can click on it and a pop up appears with background information on it.  It should also have a second button to close it and return to the main façade.  Can anyone lead me in the right direction?

  Thank you!

  Use a structure of the event on the main vi when the button is clicked, launches a "help" void / vi. On the inside of the Sub vi (with the set properties to load the front when it is called, of course), use another structure of the event to wait until then click on the button of the Subvi, you can return to the main VI. Do you need assistance on using the structures of the event?

  Charles

• Scan of the computer does not work in silent mode of the button on the front panel.

  The machine is the Photosmart all-in-1 6280 on a network of small size and using the HP Solution Center. Basically everthing works fine, but when I use the button on the front panel to scan a document, it seems necessary to walk to the computer to answer a question about whether I want to scan another document until I could walk to the printer/scanner and press the button to scan the following document. Surely, there must be a way to do the scan run in quiet mode so that I don't have to keep clicking OK on the computer every time? I have already disabled the overview of digitization and the prompt for advanced options.

  Oops, forget all that; now I found the setting 'interrogate analyses' which stood on another branch of the installation menus. That solved my problem

• Button of the front panel & remote control questions Qosmio F30-140

  Hello to all users of the Forum and to whom, who prefer Toshiba to a daily activity of s.

  I am owner of laptop Qosmio F30-140 for 7 months. I can say that I m happy with my laptop. But about 2 weeks back, I had some problems, which I can't resolve up to our days.

  I use Windows Defender to protect my PC from alert elements, applications of which I erased by this program once. There after I ve discovered that s keyboard buttons in the library and the remote responds does not and does not control panel. I had tests to recover by Qosmio player recovery CD, but unfortunately all attempts have failed.

  Please help me solve this problem, because I am deprived of my remote control, in which I so need.

  As for you and best regards.
  Dr.VugarVali

  Hello

  Looks like you have just messed the whole OS.
  Use and relocation of the recovery CD Qosmio Player will not allow Toshiba cotroll buttons and remote control.

  In you case reinstalling the driver would be desirable; Start with Manager common Module, controls, remote control.

  If it does not help the use of CD recovery Toshiba does wonders! ;)

  But note; Don t forget to back up your data because the recovery CD formats the HARD drive!

• Best way to share/update buttons on the front panel

  Hi y ' All!

  I am a beginner in LabVIEW (2 years experience: 1.5 academic year and a team of the FRC and professionnellement.5 of mentoring as a new graduate in a startup).

  We develop an application using LabVIEW which is intended to be user-friendly touch screen and we have so many front-facing button with which we are dealing. In order to make the code more readable in force and easily scalabe, I will like to know if there is an effective way to process orders from the front.

  To illustrate, let's say I have this UI:

  

  

  The real way we propagte these controls is to create a cluster of the reference of all controls (it's where I wish we had LabVIEW 2012-_-) once unbundle that we need in the appropriate section of the code (means it's a large number of sons everywhere...)

  

  So are there better ways to achieve the same goal?

  Thank you!

  I'm talking about a Controller of GUI in this thread. This can give you an idea.

  Ben

• Create new vi by clicking a button on the front panel

  Hello. I'm quite new with Labview.

  I have to use an if statement to activate a button (I don't know if it is possible or not in LabVIEW) then when the button is enabled for the user must click on the button (allows the button say NEXT) to close that vi and open an another vi to a specific address. I have need to record anything the previous VI that I just need to close and open a new one.

  Does anyone know how to activate a button to get the right answer to an if statement first and also how to close and open the new vi by clicking this button.

  Thank you very much.

  I think that the seal will help you much further.  I have documented if necessary.  If you have any other questions, feel free to ask.

  Open Main.vi and run

• N6350 Scanner will not scan button on the front panel

  I have configured the HP scanning software and added a shortcut. It will scan from the HP Scanner Software, but no analysis NOT of the scanner. The name of the user's the shortcut there. When I hit the button, is said "Please wait" and the Green LED flashes. But it does not scan.

  Solved. Do you have an another clean install and it worked...

• disabled by programming a button on the front panel

  
  
  

• WANT 411c: MFP ENVY 411c lights on the front panel

  I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

  Hello

  That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

  The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

  They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

  As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Open the front panel Excel file

  I tried to open an existing to open the front panel button... excel file but looking in the forum I found two examples... attached... done with the document word and another notebook... However I am unable to do it with excel...

  In the second example that uses Sysexec.vi... I tried to enter the path of excel file... but it does not open... but same file opens when I write it on 'Run' in windows vista...

  Advisor...

  I found the solution... using sysexec.vi and the command line...

  

  Thank you...

• button arrow in front panel

  Hi guys,.

  I want to have an arrow in the front panel to control the operation of a number.

  Which means;

  If I press the arrow key to the left, the number decreases and arrow key to the right, the reverse occurs.

  I found a drawing of arrow under the decorations but cannot change anything with her.

  Basically, the arrow is sufficient to act as a Boolean switch.

  Once pressed, it lights up and the number accordingly runs and stops when letting go.

  I want to have the arrow keys to make the more presentable façade.

  Pls advice me to.

  PLs Note: I'm not using the keyboard to simulate on the front panel. It is purely on the façade.

  Thks N RDG

  Titano

  one thing you can do. I should work

  1. make a right click button in VI and select Advanced > customize

  2. then a window will appear where you can customize the button.

  3. click on the right button and select Import an image from the Clipboard > decal

  4. it should look like this (attached)

• How to get rid of the reference lines on the front panel

  I forgot how I created a couple of horizontal and vertical lines on the front panel. It seems that the original on the front lines. When I move my program to another monitor with a different resolution, the layout is messed up because of the reference lines cannot change the resolution. Everybody respected this before? How to get rid of them?

  Attached are the 2 creen shot of facades.

  Thanks in advance.

  Ah, I figured out. I accidentally selected the "scale with objects pane" from the context menu of a button in the tab. This is whence the reference lines.

  Thanks for all your guys help and advice.