Pavilion 14 G6S71UA #ABA: I'll always be able to use the pre-loaded software HP products if I do a clean install of Windows 10?
I have a laptop 14 flag that came with Windows 8.1 - 64 Home, and I have upgraded to Windows Home 10-64. The upgrade went very wrong, but I would use Win 10 if possible. Microsoft recommends that I have to do a clean install of Windows 10, which will require you to reinstall all my programs MANY. They cannot tell me, however, if I'll still be able to use some of the applications delivered HP pre-loaded on my machine and that I find very useful - even if I am out of warranty. For example, I use HP Support Assistant updates the driver, and I found that HP DriveGuard works really well!
I'll always be able to download all of these products and hence? I'll be able to get them on the page of the drivers for my laptop? If I can't, I'll probably have to settle for return to Windows 8.1.
Thank you.
Because the rep on the Microsoft forum did not answer my questions, today I called the support of Microsoft Windows 10 phone number. After that the rep is lost another hour of time my (and their) me browsing to enter SafeMode via several methods, everything I told him that I had already tried. the representative suggested that customizations of account that I had applied could be the cause of the distress.
She also informed me that, for security reasons, Windows 10 no longer allows connectivity Mode Wireless safe; Although, if your PC is physically connected to the modem/router, you should be able to enter in IE (and maybe even in Edge) in Safe Mode.
So I added a new local administrator account (that said, I log in with a password and not with one account Microsoft.), to be used only for safe mode and left all its parameters to the default values for Microsoft. And it worked! When connected to my router, I could get in Mode safe mode with internet connectivity via IE! Thanks to this rep, I finally have success.
Tags: Notebooks
Similar Questions
-
Clean install of Windows 7 on Pavilion M6 1000so
Hello.
I have a 1000so Pavilion M6 with a chipset AMD A70M / controller.
Can someone tell me where I can find a driver windows 7 (x 64) to load when you try to do a clean install of Windows 7?
(I do not have the windows installation disc 7)
Thank you.
/ franc
Hello.
Thanks for your reply Paul.
The solution for me was to burn the image on a CD windows system file, and then it worked immediately!
When I tried to install from a USB Pendrive drived it has failed every time. I tried to install different versions of different USB drives with the same error. (the USB key works on other machines)
Install 8 Windows from a USB drive works fine. I also tried to load the atiSATA drivers (DCIS) starting from the .exe chipset.
So, it seems that the problem is that Windows 7 does have the atisata driver, but does NOT have the USB drivers...
ABAN... once more a CD does the job
Thank you.
-
When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days... But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
I'll always be able to use Lightroom on my PC if I decide to cancel my subscription to creative cloud after a prepaid year?
Yes and no.
If you cancel, Lightroom is still open, but he will return to be a viewer of images. You will always have access to the library module and a few other tools, but the module development and other features will be disabled.
For more details, see:
What happens to Lightroom, after the end of my subscription?
-
I always use Macromedia Dreamweaver 4 for my Web site. The new CC Dreamweaver will be able to use the old traced or will I have to start over?
CC of Dreamweaver is capable of handling any HTML page, regardless of where it was created. However, you might find that your existing code is not valid (it depends on how good your understanding of HTML is).
Download the demo version and see how you rate. However, you should be warned that Dreamweaver CC is very different from DW 4.
-
Network driver for a clean install of Windows 7 on HP Pavilion 15-n228us
I need Windows 7 on my new HP Pavilion 15 - n228us that came pre-installed with Windows 8.1.
I bought a stand-alone copy of Windows 7 Home Premium 64-bit. It installed fine (once I figured out how to turn an inherited run from the bios Installer).
I am missing the drivers. First of all, I want to get wireless upward and running to facilitate the search for other drivers. I think it's "network controller" in Device Manager.
So I'm going to the device, other devices Manager, controller network, properties, Details tab.
Here's what I see to a hardware ID:
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01
PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C
PCI\VEN_10EC & DEV_8179 & CC_028000
PCI\VEN_10EC & DEV_8179 & CC_0280
I searched and tried the two HP files called sp52212.exe and sp64202.exe. Neither the driver installed successfully.
What Miss me?
Hello:
You need this driver...
-
Hi there, I wonder if you might be able to help me.
Whenever I open a file in Acrobat Pro (English version) 9.4.6. and I want to use the Acrobat "OCR text recognition" at the time of recognition of OCR text that acrobat crashes. It always happens. As a first step to solve this problem I have re-installed version of Acrobat 9.0 of the DVD yesterday and I reinstalled the update but the problem remains. I suppose it could have to do with the OCR plugin. Others have similar problems? What could be a solution? In the past, this function of OCR in Acrobat Pro 9 worked without any problems. When I remember correctly the problem appeared after the Lion put 10.7.2 up-to-date. Thank you very much!
I have now uninstalled Acrobat Pro version by using the uninstall of Acrobat application. After you have reinstalled Acrobat version 9.0.0 of the DVD, there is no problem with OCR, now no longer works.
Currently, I install the updates until 9.4.6. and I guess that there will be no problem.
--> If the problem has been resolved by uninstalling and reinstalling Acrobat complete by using the uninstall of Acrobat application and the original DVD.
-
Pavilion M9100T: Clean install of Windows 10 USB
My fast enough HP Pavilion M9100T desktop computer with 8 gigabytes of memory is running Vista 64 bit and became quite slow, especially with Internet Explorer. I want to upgrade to Windows 10 using own and bought 10 USB Windows installation. Problem is that I can't find an option to boot from USB. Can you help me?
You the motherboard chipset doesn't have any Windows 10 driver support from Intel.
You wouyld be better off looking at sourcing a replacement PC.
-
I'll always be able to run the opening after upgrade to El Capitan?
I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.
On El Capitan, you need opening 3.6. You are currently running opening 3.5.1 or an older version?
Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be. (see: OS X El Capitan: revert to a previous version of OS X)
And check if you are able to update to 3.6 opening. Check before upgrade you to El Capitan.
- Open the App Store and sing in your account in the Store with your AppleID menu.
- The fourth "shopping" tab Figure opening it to your purchase history? If so, you can update opening 3.6, once you have upgraded to El Capitan. If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.
See this user Tip: update to Aperture 3.6 after the release of Photos
https://discussions.Apple.com/docs/doc-8402
3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.
There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.
- When brushing the adjustments, the position may be a bit off, a pixel or so.
- The thumbnails in the list view are backwards. Re: opening and El Capitan OSX
- If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
- The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.
And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.
-
HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1
Hello
After a clean install of windows 8.1 the audio beats does not open.
It appears in the control, but when I click on it nothing happens.
I have sound, and everything seems to work ok, but I'm curious to know what happened.
When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.
I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.
Any help would be appreciated
Hello
Download and reinstall the Realtek HD Audio software at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
Satellite Pro P300 - always 1 is displayed using the numeric keypad
Hello
I recently bought a Toshiba Satellite Pro P300, it has been the problem for free for 4 weeks.
Now, when I try to use the numeric keypad on the keyboard what is displayed on the screen is '1' any number of type i.
Does anyone know how can I fix?
Hello
I think it's a question that should be checked by a Toshiba ASP.
I googled a bit but and someone has reported that a parameter must be changed to DMII think that this can be done by a technician of ASP.
Then you should get in touch with the guys and should ask for help and also handlingSee you soon
-
After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports. I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.
I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.
The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.
I solved my problem.
-
I have Windows XP Service pack 3.
Hi Christine,
Support for Windows XP will be completed; However, you will be able to use Microsoft Word, Outlook Express and Internet Explorer without any problem.
For reference:
Record the lifecycle of Windows:
http://Windows.Microsoft.com/en-in/Windows/products/lifecycle
I hope that the information above helps you.
-
Usually in the past when I got docs who won't open, a menu will appear asking what program I want to use to open it. This does not happen in this case. My daughter uses a new laptop that obviously has a lot more progs installed up-to-date. I can't even use a solution that arose when I was wxploring ways to solve the problem, because I don't seem to have the same menu that they refer.
Have to save the files in the old format of Microsoft Office 97/2000 before they are sent to you.
-
I'll always be able to use my computer when xp coz thas what I use {xp}
Update and xp
Yes Windows XP still works, however, called Microsoft will no longer support it, which means no technical support, updates, SP, ect.
Maybe you are looking for
-
Cannot remove icon Toshiba Music Place
Hello I bought a new laptop from toshiba with windows 7 comes with a lot of bloatware.I am trying to delete it all, but I can't get rid of this series of very annoying 'place' on the desktop. I deleted the program using Add/Remove programs.the deskto
-
How the macro in the .h file is mapped to the control CVICALLBACK setting?
I have created 8 control buttons and creates same reminder for all buttons. Have a multitude of 2 x 4 initialized with the value 1. When the user clicks a button value of 2 x 4 table must go to 0 (as the command button does not change the value 1 whe
-
Cannot save files - to get the error message 0 x 80070005
For the last three days, if I try to back up my files, I get the error message 0 x 80070005 - access is denied, no other information. It's never happened before. I recently installed the latest version of Mozilla Firefox - 3.5 RC3. FAX to Back Up has
-
What does a hard drive initialization?
I take a slave (400 GB) drive on a computer that is dead (reason not hard drive) and try to access the data by placing it in a pregnant connected external USB. When I turn on the speaker and connect via USB 2.0, I don't see the drive in Explorer, but
-
SSD Sata HARD drive appearing is not in the system of the device
I added a SSD HDD to my system via a sata connection and I see the drive listed in the BIOS, but it does not appear in the "My computer" window I can't format it to use it. I also noticed when the bios runs at startup it flashes very quickly a messag