Pavilion 14-n231TU: can I connect a monitor and use this screen as a monitor for my laptop?

Similar Questions

• How can I connect 2 monitors for a Pavilion p6 2120 Windows 7

  How can I connect 2 monitors for a Pavilion p6 2120 Windows 7

  Hello

  Based on the following link, you can have 2 monitors, 1 uses the VGA connection and 1 uses the connection DVD

  http://www.shopping.HP.com/shopping/PDF/h2m53aa.PDF

  All you need is to buy 2 monitors (can also have good analog & digital connectors) and 2 cables. Normally the cables should come in boxes.

  Kind regards.

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features...

  Original title: how to uninstall client services for netware?

  When I change how a user connects power on and off a screen appears saying "client for Netware has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall client services for Netware... But it is impossible to find... Help?

  Hello LindsayJune,

  Click the Start button.
  Click on Control Panel. Select network connections
  Right click on 'Connect to the Local network', then click 'properties '.
  Search for "Client Service for NetWare" slot "this connection uses the following items."
  Click it, and then click the "Uninstall" button
  Restart your computer.

  Uninstall client for Netware feature will allow the option of quick change of user on your computer.

  I hope this helps.

• HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

  RSFSS, welcome to the forum.

  Here's a guide that should help you with your problem.

  RSFSS wrote:
  

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

  http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  I have an IMAC of mid-2011.  Can I connect a Mac mini to this iMac 2011 and use this monitor that has a built in processor?

  You should be able to, given the Mac Mini has the correct connections (in this case, a Thunderbolt connection).

  Use your iMac as a display with the target - Apple Support Display Mode

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• Can I connect two monitors to a PC Tower? cc = us

  Can I connect two monitors to a PC Tower?

  Yes, you can connect two monitors to a PC Tower... but your PC should have several outputs that are concomitant supported and your monitors must have matching entries to make it work. If your system does not support multiple and simultaneous outputs there are other options to solve this problem.

  Frank

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I can't connect to MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code

  Hello world

  Hi everyone, please I need help I can not connect on MSN and Hotmail for a long time, about 2 weeks and I try to change my password but the support of coustomor give me a PIN code but I forgot it and when I try to answer to the security question, they said try later I am looking for your help I have a lot of private information and I want to get that back please help me :(
  How will I know if my account has been blocked? and how can I get it back?
  Hi -0,
  
  The question you have posted is better suited for Windows Live Forums, check out the link:

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Reference: How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

   

  I hope this helps.

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• can I connect port 2 of my WLC 4404 in my dmz for access to guest user

  Hi all

  My script is

  Cisco wlc 4404, with 20 access points, I want an internal client wlan and wlan of comments, I configured the VLAN and WLAN, but would be possible to have all the internet traffic for customers going to port 2 on the controller of the demilitarized zone of my firewall? How I would get this job, coems from traffic to the ap through a port on the controller.

  Help, please

  see you soon

  Carl

  Carl,

  You must have two interfaces AP-Manager because you connect physically two ports of distribution on the WLC.  When you do this, you must use LAG (that you can not do in the case because you connect to two different switches) or have an ap Manager assigned to each port (this is how you can have the switch redundancy).  So yes, it will allow you to do. Please see the link guide to config I have sent for more information on the use of multiple ap interfaces - manager.

  The WLC knows that he has to send the traffic comments port 2 because WLAN guest is assigned to the interface of comments which, in turn, is assigned to port 2.

  Again, I strongly recommend that you open a TAC case, so you can speak with an engineer and discuss this because as you can see, it can be bit confusing

  Lee

• I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect.

  I have my Surface RT. I can connect to my WiFi at home and my Verizon myfi without problem. I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect. My Windows 7 laptop, iPhone and IPad allows me to enter my network credentials and I can connect to my corporate network. The surface is the only I've seen fail to ask my ID. I imported certificates of company company of my such surface as recommended by people of the support surface. I even created a login account for local access with the same user name and password, still no luck. Any ideas?

  If you right-click on the network so that in the range of the context menu has the option "forget this network". This will clear the credentials and appears the next time that you connect the dialog to enter credentials.

  Make sure you have the updates installed December and supposedly includes improvements on the wireless.

• If I buy Creative Cloud subscription should I used products only in connection or without an internet connection, I will not use this app?

  If I buy Creative Cloud subscription should I used products only in connection or without an internet connection, I will not use this app?

  Hi alperb33255764,

  You can use what you want, there is no such limitation. However when you go to cloud service based like loading or sync files to your cloud storage, you need an active Internet connection.

  I recommend you see this KB doc for more information on creative cloud: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html

  Kind regards

  Rahul