Pavilion 15 ab029tx: after upgrade to drive z windows 10 creation

Similar Questions

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• Cannot install recovery image on my Equium after upgrade HARD drive

  Hello

  I just installed a new hard drive for my Toshiba laptop Equium I contacted Toshiba who informed me that I could mount up to 1 TB, I opted for with a 500 GB at halfway.
  After installing the drive I inserted the disc of recovery after a while, it was loaded with the operation completed successfully message. Next message put in place windows could not configure windows to run on this computer hardware. Then windows could not complete the installation to install windows on installation, this restart of the computer...

  At the end of the restore process a message tells me to remove the recovery disc and output as soon as I get the laptop stops and doesn t re boot automatically. During the next restart windows message Vista starts for the first time then the cycle starts again. I tried to reload several times recovery according to the instructions, but not good.

  Any help much appreciated

  I put t know which model of laptop you have, but if the recovery image is Vista, it must be quite old model, maybe Equium A200.
  To be honest I didn't experiment with the upgrade of the HARD drive on older models, but I can imagine the image recovery are a problems with hard drives with huge capacities.

  Display please model name and which HDD you inside now.
  By the way: if possible, try to install Win7 using Microsoft installation disc. I m it will be safe works without any problem.

• Compaq Presario DVD/CD drive not recognized after upgrade to 8.1 Windows

  Hello, I recently updated my SR5601UK to Windows 8.1, and he ceased to recognize the CD-ROM drive in Windows.

  The last disc it read was the 8.1 upgrade disk.

  I checked the power and data cables and the two are connected, Bios, recognizes that I checked for upper and lower buffers in the registry and there is nothing to remove.

  No CD/DVD drive is listed in the section 'Devices & readers' on 'This PC' or in 'Device Manager '.

  The powers of disc when a disc is inserted, but nothing appears on the screen.

  I can only find drivers/firmware on the site HP for XP, Vista and 7, but nothing for 8, so cannot say if it is a firmware/driver problem.

  HP Web site says spec of the car but not the manufacturer, so I had trouble finding the update.

  Hello:

  See if the resolution steps 2, 3, 4 or 5 solves the problem.

  One usually does.

  http://support.Microsoft.com/kb/314060/en-us

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• Cursor disappeared on my IdeaPad after upgrade to 8.1 Windows

  Recently, I upgraded my Ideapad to 8.1 Windows with my graphics driver as well as another driver.

  After upgrading my pointer disappeared on restart. My mouse pointer appears always as usual at the login screen, but after I login, it disappears. The cursor is still active, so I can still run applications, but the cursor is not visible and it is very frustrating.

  If someone has encountered this problem with their upgrade and if so, would you be able to share something with me?

  Thank you

  Only, I have solved my problem. After upgrade to Windows 8.1, I noticed that the Pen & Touch option was no longer available in my control panel.

  For those of you who own a Wacom tablet, you need to reinstall you Wacom using the CD they provide and that should solve your problem immediately.

  Windows was going to charge me $160 to fix the problem, saying that my computer must be riddeled with the Trojans, which is the reason why my cursor was not show.

• No Bluetooth after upgrade to 8.1 Windows - model 1104TX (ENVY m6)

  Hello

  My system is HP Envy m6 1104tx. It came with Windows 8 (64-bit) preinstalled and everything was going well until I chose to upgrade to 8.1 Windows.

  After checking with CompMgmt.msc, I found that I had 3290 RaLink 802.11 Wi - Fi adapter. Just below NICs, I have "Other devices" and under "Bluetooth Controller" with a yellow exclamation mark on the subject. I tried to update the drivers, but it says "Windows failed to install the controller bluetooth"(pas pu trouver pilote logiciel pour votre périphérique). "»

  I've updated almost all possible device drivers, but this 'Bluetooth controller' still shows a yellow exclamation mark on it.

  Also in CompMgmt.msc I can't find "Bluetooth" or "Bluetooth Module" but on the contrary, there is a 'profiles Bluetooth device' and inside this 'Bluetooth Interface Driver profile '. I tried to update, but the result was still once, as mentioned above.

  So, how to solve this? How to make implementing Bluetooth on my m6 desire?

  PS And yes I ran Technical Assistance from HP, but it says everything is fine. And in reality it is not, Bluetooth does not.

  RENJ

  Thanks Makachaka,

  I really appreciate your time and your help. However your suggestion came a little too late.

  I had already solved my problem with Bluetooth using the instructions contained in the following web page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Bluetooth-systemthreadexceptionnothandled-blue/e9e410d4-ef73-40C2-9e4e-b05c5d604c6c?LC=2057&auth=1

  The gap only I took while troubleshooting from the procedure described in the page Microsoft above was that I didn't not apply the patch from Intel Bluetooth. The rest was exactly as described. Problem solved for me.

  @Makachaka: thanks and have a great year!

• Download HP Pavilion dv9910us Notebook PC Network controller driver for windows 7

  Please my network controller notebook PC HP pavilion dv9910us (NVIDIA nforce network controller) does not work after the installation of the windows operating system 7.  How can I get the correct driver to install my network controller can operate so that I can connect to the internet.  I have your site looking for suitable, driver but can't find it.

  Thank you.

  Evrard Michel Saunier

  Ghana (West Africa)

  Hello

  Try installing the Chipset driver on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37730.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Lenovo Y400 HDD partition after upgrade to 8.1 WIndows

  I upgraded my Lenovo Y400 Windows 8.1, and I noticed that there are 8 partitions on disk 0. Is this normal?

  Otherwise, what partition I could merge/delete/resize without sacrificing the functionality of One (OKR) key recovery?

  

  I want to buy SSD in the near future (probably 128 GB) and want to use it as a system and my existing as data storage HARD drive. It is possible to clone my disk SSD with the always OKR works?

  Thank you very much!

  Here's the original scores, as seen in another way:

  

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• Office Jet V40: problem with Office Jet V40 after upgrading to 64-bit Windows 10

  I just downloaded Windows 10 64-bit on my Asus laptop and now my Jet V40 of office all-in-one printer will not work correctly.  I tried to download the new drivers for 64-bit Windows 10 several times from the driver of HP downloads site but nothing happened.  I ran the HP print and scan doctor several times and he said I had a problem of correspondence of port, but was not able to resolve the issue after I restarted my laptop.  Help, please.

  Hello @Gator44,

  Welcome to th eHP support forums.

  I appreciate that you try to connect your Officejet v40 to your computer Windows 10.

  When I studied the list of HP printers compatible for Windows 10, the v40 is there.

  HP printers - printers compatible Windows 10

  He recommends the driver from Windows Update. This means that it is is not, or should not be any driver download.

  How to install the OS in Windows and update drivers?

  Go to the HP printers - install and use the print driver built-in Windows for instructions on how to install the Windows driver for your printer and to resolve installation problems.

• Cannot set UEFI after upgrade to 8.1 Windows (P6 HP 2364ea)

  Hello

  I recently bought a HP P6 (Pavilion) 2364ea tower that came with Windows 8 is installed. When buying I could enter the parameters of UEFI at startup by pressing one of the function keys. Now that I have upgraded to 8.1 Windows no splash screen or UEFI settings are available when booting - any function keys I type.

  I tried to reboot to the Windows Advanced Boot-> troubleshoot-> advanced options-> settings for UEFI firmware road but the PC starts just to a white screen with no hard disk activity. I then reboot into Windows 8. The same thing happens if I try to change the windows startup options.

  Any help would be greatly appreciated!

  Thank you

  Gary

  I have now managed to access the UEFI settings using an old VGA monitor to start instead of my screen thanks to a post of dave2009 on another thread. For anyone having the same problem here is his message:

  I hope it will work for you or someone else. I felt the same way - try to access the settings of the PC UEFI firmware and got a screen empty every time. Tried the ridiculous press F10 every second. Nada.

  Fortunately, I came across this post that put me on my solution. It's actually the BIOS could not display on my monitor (s).

  The BIOS has been there all along, but I didn't know it.

  My setup is a HP Envy with Intel HD graphics office built in connected with DVI to HDMI cables to 2 HP w2338h monitors that have a native resolution of 1920 x 1080 or more. Solution? Unplug everything and plug an older monitor CRT HP with a VGA to DVI. Seriously. My new HP desktop cannot display the HP BIOS on my HP flat screens. Now, I'm not going to dig into this but I suspect even just plug one of the flat screens equipped with a VGA connector could do the trick.

  And wa - la. My firmware is not corrupt. I need not do anything crazy. I just needed to downgrade my video connectors in order to see the bios. And, now that I have my graphics card inherited here, I see this cute bootscreen of HP. Previously, black until the windows open. It's a whole new world!

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• Unable to connect after upgrade to 8.1 Windows

  I also have problems to connect to my computer. I've upgraded to 8.1 windows yesterday and cannot open a session today. I have reset my password and that does not work either.

  Its strange that this site recognize my new password but my computer doesn't work?

  They gave me a website to go on live chat - guess what it does not work or the other. I need a phone number to call to speak to someone.

  You can go to www.microsoft.com/support and choose your problem talking to this Department.

  The reason why the site recognize the new password, but your computer is probably due to your computer, not seen yet synchronized with the online system.  Your computer cannot be connected to the Internet or WiFi, meaning that he had a way to 'know' the new password.

  If you have another administrator level account on your computer, you can go to reset the password.

  If there is no administrator account on the system, you can start safe mode to access the built-in Administrator account.  Since this fail-safe account, you can force - reset your account password.

  1. BLAH, the logon screen, click the Power Options icon, then hold down the SHIFT key while you click the Restart option. Keep now shift until the screen shows it restarts.
  2. On the first screen that appears, select troubleshooting, and then select Advanced Options. Finally, choose the boot settings and click Restart.
  3. On the next screen, press the number 4 to choose Safe Mode.

  Now that you are in safe mode, you can use the backup Administrator account built for perform you a necessary recovery. Built in Administrator account should not be used for any other purpose, or it is not available in such situations when you need it.

  1. On the login screen, click on the arrow icon, and then select the administrator account.
  2. After the Safe Mode boot, press on + W and open the control panel / user accounts.
  3. Select manage another account, and then select the account you want to switch to an administrator account. You can also use the option change password here to reset the password of the other account.

  When finished, restart the computer normally.