Pavilion 15-e070sl: problem with the key "cancelled."

Hi guys,.

I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

I hope you find a solution

With the availability!


Hi @MichaelMazz ,

Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

I hope this helps.

Thank you.

Tags: Notebooks

Similar Questions

  • I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

    I have a problem with
    the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
    Drive hard ist crasht a moment the aktivate display the error. Please you can reset the

    Hi berndp3095653,


    You must contact the customer as some changes to do on the backend

    Contact the customer service



  • HP pavilion n242se 15: problem with the BIOS software

    I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
    Please, I want to again software for BIOS for Windows 10 64 bit

    Can you help me?


    Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

    They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

    The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

  • HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

    Hi all

    My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

    summer giving a helping hand by making the upgrade.

    Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

    processor, it seemed to be good upgrade to improve the performance of the laptop.

    We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

    ( interview guide , page 108), and the seller assured us he tested the CPU on some different

    HP pavilion and it worked fine.

    But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

    on the front and the setting of the power and volume buttons would light up periodically. The screen was black

    All the time.

    Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

    and it starts fine.

    I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

    same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

    I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

    missed, or the problem elsewhere?

    Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

    on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

    Any help, advice or general guidelines as to what should be done would be really appreciated.

    Thank you for your attention.


    The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

    In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

  • Pavilion 15-n234sl: problem with the installation of the driver WIFI RTL8188EE

    Hello world.

    I encounter some problem with my wireless card since the new driver is available via windows update.

    The installation seems to be ok, but after that the card no longer works.

    The key of the keyboard wifi light. lit red guard if it is set to the aero mode.

    The card works fine in rolling back to a previous system configuration, it goes back to work, until the new driver is installed again.

    Any who have experienced the same problem or does anyone have a solution?

    Can someone tell me the other compatible wifi cards in case of substitution?

    Thank you very much and sorry if my English is not perfect!



    Please read my recommendation about what to do on the link below...

  • Problem with the key S/4 blackBerry Smartphones.

    Well, Hello community; This is my first post here.

    I have a problem with my Blackberry Curve 8520 device:

    3 days ago I typed the password incorrectly 10 times, then he appeard things like (wiping or something) and some numbers. Later, I turned on my camera; And seen all Contacts and all reset, I restarted from the beginning (adding new contacts Downloding, programs, etc.) This has worked for me for 2 days, but now... My camera is trolling as hell, (S/4) key does not work, I can not activate it with the mute button; I need to activate it with the 'Red' button, too, if I turn off the power, I can't activate it with the 'Red' button, I just pull the battery...

    (Hope you understand my problem and sorry for my English, I know; She sucks...

    Greetings, Diego)

    Hello and welcome to the community!

    You can consider a charge of BONE, that something can be a problem with your OS BB given what you describe. But first, please try safe MODE:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, run for awhile determine if behaviour will or will not return. If it is then in safe mode, then you should proceed with reloading the OS. But if the behavior does not work in safe MODE, then well... think about what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    To perform a reload of the OS, here are some process, you can use:

    At the top of each forum device, there should be some 'sticky' threads dealing with the level of the OS available for many models. If they understand your model, please use those as a reference as you go along. Otherwise, you will have to dig through the download portal official for packages of OS for your model:

    From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

    Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

    You can also study the use of BBSAK ( to perform the wipe what he is capable.

    You can also try this procedure might limit the specific causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Pavilion 14-v202tx: problem with the driver


    I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

    My laptop HP Pavilion 14-v202tx

    Please help me


    Broadcom Wifi

    Broadcom Bluetooth software

    PCI device

    Kind regards.

  • Pavilion g6-2306el: problems with the recovery DVD-R discs

    Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

    Hi @anthony_s

    Thank you for your query.

    I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

    No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

    This is how to do a 2nd set of recovery disks.

    Good luck!

  • Pavilion dv6-2124el: problem with the volume key


    I wanted to know if someone could help me with this question: I have just formatted my laptop and installed Win7 HP 64 bit computer and I can not anymore in order to visualize the volume HP bar on the screen. I tried to install HP Quick Play, quick launch buttons and touch fast, but it does not work. Maybe I installed wrong version? Maybe I missed another driver/software?

    How can I solve this problem?

    Thanks for reading it.


    For your particular laptop volume on the display screen is provided by HP MediaSmart SmartMenu on the following link.  Note:  Make sure that you have installed at least 1 other MediaSmart software before installing this.

    HP MediaSmart SmartMenu

    After the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • Pavilion 500-054: hp pavilion 500-054 problems with the connection to monitor

    I have a 500-054 pavilion and I for a few years now.  Last year he stop to connect to my monitor (HP).  I check inside the tower and believe me there is no graphics in this card.  I see not where are the vga and dvi ports, but I don't have the graphics card.  Why it just stop working all of a sudden?  Is there anyway to fix this without buying a graphics card?  Or if I should buy a that one should I get?

    Thank you

    According to this PAGE SPEC, the PC has integrated graphics, which means that the graphics are part of the motherboard.  If either VGA or DVI ports do not connect on the screen, then maybe the integrated graphics card failed.  I see that the motherboard has a PCIxe slot, so it could be solved with an inexpensive graphics card.  Assuming that the integrated graphics card expectations it, then a discreet card for less than $50 should be easily enough.  HERE IS a PAGEfor this motherboard compatible graphics cards.  Pich an out of AMD or NVidia

  • New Pavilion g7 2302sa, problems with the help of touchpad

    Hi, I hope I have my question in the right place now!

    I have just bought the above and watched videos of introduction, including regarding the use of the touch pad.

    I have a problem that when I put two fingers on the touchpad, the cursor remains static, which means that I can't do some of the things that I should be able to do.

    I searched the forums but cannot find an answer to this model of laptop. The closest seems to be updating the drivers for the touchpad, but I'm a little worried to play with something that is less than a week.

    Thank you for reading this, I hope someone can help

    I found what happens to me if the pressure that I put on the touchpad is too great. Gently place two fingers on the touchpad at the same time, and then try a sliding or expansion of gesture. It needs a slight touch of gestures.

  • Pavilion g6 - 2211st: problems with the installation of the graphics driver

    I need help for my hp product. It is extremely slow after reinstall my Windows 7 64 b! I've looked everywhere for the solution, but without results. In my adapter driver Dispecher Manager Dysplay "Standard VGA Graphic Adapter" has warning icon. It is possible to be there? I can't find a newer driver for it. Please if you have an idea of what to write back. Concerning


    This driver should work.  Install and reboot the PC.

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp58894.exe

  • Pavilion 15-ac041ne: problem with the installation of Lan & Wifi driver

    Hello... I recently bought Pavilion 15-ac041ne laptop. I installed a new copy of windows 7 64 bit, but when I tried to install the lan and wifi drivers she had failed. I tried all the ad Lan drivers WiFi here given in the database. I also checked the path of device information, but was really surprised to find that the brand that has been listed in the database has been for Realtek while the "device info" showed the Broadcom brand, which did not appear in the database. My question is why this specific brand has not been there or has someone removed the lan/Wifi device pluged in the broadcom and realtek... is there a possibility... ???


    For the full series, some have Realteak, some Broadcom. You machine also have Bluetooth combo:

    Please install the following Broadcom wireless driver:

    and Broadcom Bluetooth:

    I do not know what database you're talking about, but all the drivers for your machine are on its home page:

    Kind regards.

  • Problem with the key... Button does not

    My workflow is like this... I took three HoriZontalManager an organization theBackgroundImage the button and two HoriZontalManager to the CustomButton and I am adding the main hfm who hold the button and the background image at the top and then I added the list in a VerticalfieldManager but I don't get the button work the focus always remains in the field list. Now when I click on the update button always resides on the first line of the field list , so it always shows me the selector which is actually I set up on the first line of listfield. How can I solve this...

    Thanks in advance...

    Help, please.

    Solved the problem, I had to check that if the button has the focus, then do the work remains the Listfield has focus. So just check

    In the {navigationClick (int hour, int status)

    {if (Button.isFocus ())}

    Get the job done

    } else {}

    Field list is selected



    Thank you all for your concerns...

  • HP Pavilion g7-1219wm - problem with the network controller

    Hello, I have recently upgraded to Windows 8, everythings summer works well, but sometimes last night, my wifi controller not turn back and the only things I can find online about this are for Windows 7, the adapter is

    Realtek RTL8188CE 802.11b/g/n WiFi Adapter - and the controller is

    Realtek PCIe FE Family Controller-

    Ive went in Device Manager and disabled and enabled both devices, when I turned off the wifi card and enabled him once again, the light on the blue illuminated keyboard for a fraction of a second, then back to orange to turn them off, but when I disabled and then enabled the controller who did not, and I went into the bios and everything reset back to the default values and still nothing , the only thing I did is to uninstall the driver and reinstall it, have not found one for that compatible with windows 8 again, if anyone has an idea on what's happening please let me know, thanks!


    See if the windows driver 8 directly from realtek works...

    Check the appropriate box (RTL8188CE) and then click on the plu blue go button the bottom of the page.

    You will then be directed to the driver page where the driver of windows 8 is the second file listed on the page.

    The wired network adapter... W8 is the 7th downloading listed on the page.


Maybe you are looking for