Pavilion 15: Need help with replacement for fan

Similar Questions

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

• Need help with divers for ASUS Intel Socket 775 Motherboard,

  Need help to locate drivers for this motherboard, my external USB hard drives do work not be recognized, no drvers for SM Bus controller, link controller SATA Silicon Image Sil 31 or 32,.

  To help you to download the drivers for your computer, you can check out the link below. You can also contact the Asus Support using the link below.

  http://support.ASUS.com/download/download.aspx?SLanguage=en-us XD

• Need help with license for Windows store

  Hello! I have problem with Windows store, he says he has a problem with the license.

  It happened because I tried to upgrade my Windows 8.1 to Windows 10 and I've failed at about 20 times. Servers of M$ have been save this issue but they have not registered my fails so now servers $ M think I use illegal license for my laptop. My laptop is Asus F55A and I can not use the store because M$ servers does not allow me too.

  Please Microsoft something about it.i have legal Windows but probably your servers register this as illegal because I repeatedly upgrading to windows 10 who never worked and your servers did not know my fails.

  Please answer.

  Error with Windows store code "this application failed to start because of a problem with its license. Please try again later.

  Any help will be for me!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I suggest you to refer to the suggestions of B Abid replied on 29 October 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/unable-to-open-Windows-8-store/8a90d67e-9FEE-4B1F-A549-e702d0b207f4

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

• Need help with as3 for pop-up window

  I'm nearing the end of the semester in my Flash Animation class. I learned things very simple AS3, extracted etc. code. I'll try to find the actionscript code to encode a simple popup window, but have not found a clue.

  Here's what I want to do... I have a white box with a certain guy on the stage. When a person clicks on the white box, I want a popup to open which is larger, which contains the same type but bigger. This box will have an x, so it may be rejected. I don't want to do it in html, only in Flash CS5. I don't want a browser window, I want just a larger version of the smaller area. I know how to build the two boxes, do not know how to write the code. I know there will be a click on the mouse event listener, and then I'm lost.

  Can someone help with the code that I could use? It would be most appreciated.

  It would be something along the lines of... (using the names of instance from your description)...

  Popup.Visible = false;

  whiteBox.addEventListener (MouseEvent.CLICK, showPopup);

  function showPopup(evt:MouseEvent):void {}

  Popup.Visible = true;

  }

  popup.popupX.addEventListener (MouseEvent.CLICK, hidePopup);

  function hidePopup(evt:MouseEvent):void {}

  Popup.Visible = false;

  }

• Need help with replacement tips Sony hybrid

  Hey all,.

  Please first post here, so I'm sorry if I posted in the wrong section. This month I ordered the spare Atria hybrid Sony EPEX10A/BLK on Amazon.com. While he was trying to get a great tip on my Sennheiser CX500s, broken the coloured part. Now, I have only a great tip, which is currently normal the CX500 very well. I really need another great tip, and I don't know what to do. I thought that the best option would be to contact the Sony Support and ask for a replacement (I guess my warranty is still in effect, dunno anything), but I don't know how. I went on this website (http://esupport.sony.com/US/perl/contact-land.pl) and support selected, and since I could not find my product in the list, I typed in what I thought was the model number, and it came with no result. I have no idea where the model number is on the packaging (which I still have).

  Can someone please help me to get a replacement? Other than the broken tip, what are the best advice I've had , and I would really like to continue to use.

  Thanks for the help!

  Contact Sony parts and accessories - they have a different number of Support technique Sony and should be able to find the right part for you - details on the following link:

  https://servicesales.sel.Sony.com/ecom/... index.jsp

• Corrupted hard disk, need help with replacement drive...

  I have currently a HP Pavilion DV6500 is a bit old but my children use it for learning games and watch netflix. They use on a daily basis. Months ago, the hard drive went out on this issue I tried to take it they told me to just buy a new laptop cost way to much to fix.

  The hard drive has a sticker that says "Replace with HP Spare" which makes it means? The laptop was running a Seagate Momentus 5400.3 im looking for a disc compatible hard good which can be integrated in the laptop right now. And a what it cost an arm and a leg.

  Any help would be greatly appreciated. Thank you for your help.

  Hello

  The player at the link below is an example of one that would be perfect for your laptop.

  250 GB hard drive for laptop.

  The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Need help with adapters for T60 wireless

  Hello!

  I recently came across a T60 and I need it to be able to 5 GHz Wireless. The wireless current is not.

  I'm not a genius when it comes to wireless cards, where they are and whether or not they are compatible, this is why I come to you! Will you please help me find a wireless adapter which is dual band, so I can connect more than 5 GHz. No price is too high.

  Thank you for your time!

  -Gabriel Ruiz

  Welcome to the forum!

  If you do not use the BIOS modded, search eBay or Google T 42, 0825 , which is Lenovo a/b/g/n card than some T60 delivered with original series.

• Need help with replacement disk on port 0 in Raid1 desktop machine

  I have a HPE 380 t. I have has a RAID1 (mirror) with 2-500 GB Western Digital. When I boot it says the raid has deteriorated and an error has occurred on the player connected to port 0, port 1 player shows ok. It's in the Manager of the Intel Matrix Storage Manager, (Ctrl + I on startup). The machine starts again, but I want to replace the drive on Port 0 with another disk of 500 GB.

  How can I go on that so I don't toast all data on the drive Port1?

  I searched links and other places for help on this but nothing helps! Is there a tutorial or step by step instructions somewhere that I can go?

  Thanks in advance

  Hi Mike,.

  Lucky for you that you are using non-RAID 0 and RAID 1 or your table would probably unusable.

  You can determine the status of your RAID configuration using the Intel Rapid Storage Technology (IRST) software.  If you do not have this software on your PC, then you can Download IRST from the Intel web site.  I recommend that you use the latest version available from Intel.  General information can be obtained from the TSRI User Guide.  When you launch TSRI, help topics are an excellent source of information.  You can access TSRI by going to the control panel and select Intel Rapid Storage Technology. You can also access TSRI from low location of the taskbar.  TSRI should resemble a hard disk icon and it normally has a green check mark.  By default, TSRI is defined as delayed start, so don't expect to see active immediately.

  1. Launch the IRST while under Windows
  2. Click Help
  3. Click on troubleshooting
  4. Click on gradient volumes and follow the recommendations. Scroll to RAID 1.

• Need help with tabs for recipes

  I'm sorry if this is basic, but my brain does not work after hours of playing with it. I want to put in place a fairly simple tab for the ingredients of the recipe - not numbered as, I understand - but the quantities of ingredients that vary according to the width... May 1, could be 1 3/4 can be 14... I want this column of numbers flush right, then a space, then the rest of the ingredient should be flush left with a hanging indent (see the last line of the example). So, it looks like this (from cooks illustrated):

  

  Can someone give me an idea how to implement that (and have usable)? Unformatted text would be:

  2 large eggs 1 large white of egg

  1/2 cup (2 1/2 ounced) of all-purpose bleached, sifted flour.

  etc etc etc.

  This makes me crazy... any help appreciated.

  You need to configure it as a paragraph Style

  

• Need help with replacing a drive on a virtual machine

  Test case for something I need to do on a separate production machine.  Virtual MACHINE is running WinSvr2003.  Only the hard disk assigned to the virtual machine is one of 20 GB disk, C: using this.  Need to C: to be larger.  Add a 40 GB drive to the configuration of the VM in the CR.  Started an iso BartPE with plug-in in Ghost.  Ghost can copy the C: 20 GB drive on the 40 GB drive.  Went in the VM config and changed is the 40 GB SCSI 0.1 drive and the drive of 20 GB at SCSI0, 2.  After I saved, VMware changed the 40 GB on disk 1 and the 20 GB on disk 2.  Went it into the BIOS on the machine config to boot the disk of 40 GB.  But no matter how I put it in the BIOS, it would only start on the 20 GB drive.  Went in the VM config and removed the 20 GB drive (which is not an option on the production machine, it has a volume of data on the same drive).  It boots to Windows, so I guess it's start on the 40 GB drive.  But I am unable to connect to it.  It shows that the application of settings, record the settings, then back to the login screen, all within 2 seconds approximately.

  Is there anything else I need to do to (1) move the volume from the Windows system to a new disk w without side effects in Windows and (2) so that it can start on the new disk correctly?

  If it is a single virtual drive with 2 partitions and the C:\ is on the front of the drive, Extpart won't help. It is usually best to separate the partitions to multiple virtual disks. I use the converter to V2V the VM and move on their own virtual disk partitions, then develop them if necessary.

• Need help with query for points and polygons, 2 tables of

  Hi all
  
  I'm slowly stumbling along trying to figure things out space.
  
  I have two tables, GEO_POINTS:
  (
  DEP_ID NUMBER (12) NOT NULL,
  LINE NUMBER 4 NOT NULL,.
  MDSYS. POINT_LOC SDO_GEOMETRY
  )
  
  and POLYGON_AREAS:
  (
  POLY_NAME VARCHAR2 (120 CHAR),
  POLY_DESC VARCHAR2 (120 CHAR),
  MDSYS POLY_POINTS. SDO_GEOMETRY
  )
  
  Neither table is engraved in stone, if any, I can change some structure.
  
  I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.
  
  Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.
  
  What I have so far, which is not working properly, is the following:
  
  Select * from deposits_search where dep_id in)
  SELECT dep_id
  OF geo_points, polygon_areas
  where (sdo_relate)
  poly_points,
  (SELECT point_loc
  OF geo_points
  WHERE dep_id = 10282444),
  ("mask = ANYINTERACT") = "TRUE");
  
  In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.
  
  Any help is greatly appreciated. Thank you
  
  Bill Ferguson

  in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

  better, you use the SDO_WITHIN_DISTANCE operator.

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

  Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

  Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

  Luke

• Need help with drivers for Satellite P205-S6267

  I think I have all the drivers for my laptop, but I can't control the brightness of the screen or access capabilities of standby power. I downloaded tons of drivers power saver, and none of them work. Someone please help. I am running XP and the only driver I found is for Vista. I've been at this for two days... Please write to me at:

  [email protected]

  Hello

  Just FYI: whenever you need a driver download from http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp?

  As you can see your model of laptop is not yet supported for WXP and I guess you have to wait because you need precisely designed these tools and utilities for your laptop model. In the meantime, I think you can live without brightness control option. In my opinion, it is not so important. Also try to use the Windows power saver options. I'm sure you can use them up to what Toshiba offer WXP tools and utilities.

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti