Pavilion 15 Note Book: photographs of wireless mode on my smart TV content of my lap top IE?

Similar Questions

• HP PAVILION 15 NOTE BOOK PC: my C: DRIVE SHOWING in COLOR RED

  My C: drive shows 20 of 226 GB GB. Three days back I had contacted the HP support team they had restored my pc to this day 21/08/2016. However, the problem persists. All this looks after that I instaled the MAcfee antivirus soft ware.

  When I tired to move files and data to the other readers of some files will not move.

  What are the system files, if I had deleted files without knowing I can get it back

  This C drive shows a red color that is very worrying. What will happen if I continue to work in this condition of my pc?

  Help!

  Spoiler (Highlight to read)

  Beautiful Yes! It work I had to get rid of the undesirable and rarely used program now below 20.1 GB OF 226 GB 10% FREE SPACE IS THERE, now the color of the normal as the other reader blued c:.
  
  Grateful for the forum. Nice day. Problem fixed.
  
  Thank you
  
  Bye!

• Pavilion 15 Note book e99ca: the two keys update has stopped working

  both my shift keys stopped working.  any suggestions?

  I have the BIOS

  remove the keyboard driver in the Manager device and rebooted

  checked the key stacky

  update of each driver and windows

  full system antivirus scan

  any help would be great

  Find a solution on the windows site.  Hold down the SHIFT key, and then restart your laptop!

• Pavilion dv6 notebook pc: how to repair my keyboard. The sign is installed to the "key and I did not book sterling key @.» Thank you

  My keyboard has changed a few months ago.  The @ moved to the "key and I did not book sterling key.»  How can I repair my keyboard.  I'm on windows 10. Thank you.

  Hello

  Looks like you have poorly defined the keyboard layout.

  If you have more than one keyboard layout in Windows 10, you can switch between them by keeping the CTRL key and pressing the SHIFT key

  You can also change the layout for your keyboard as shown in the link below.

  Change of keyboard - Windows 8 & 10

  Kind regards

  DP - K

• HP Elitebook 8460p Note Book P: Mobile Broadband not found my sim on windows 10 signal

  Hi everyone how are you, I hope everything's going, brother am so an advance of the user, but I have a problem finally ago one day, when I try to install Windows on my PC HP Elitebook 8460p Note Book Pc 10 and this work will be perfect, but when I try to use my system imbaded HP un2420 Module device Mobile Broadband installed the driver of this pilot "Sierra Wireless HP un2420 Mobile Broadband Module «Driver package version 3.5.1308.3911»» after reboot and insert my sim cell on the divce, can he take my divce easily, but when I try to connect internet then the signal problem occoure, singnal not shown, looking for Singal but device and sim job will be after all when I reistalled windows 8.1 Pro then work perfect internet operation of signal and the connection will be, so if you have any solution to solve the singal problem on windows 10 then share with me thank you Once again

  Isaac Javed of Pakistan

  You, like the rest of us, will have to wait Windows 10 becomes a release for the manufacture of operating system.

  It is currently only a technical preview and has no support any manufacturer. When he was released, manufacturers will respond and we will know what hardware devices will be supported.

  You can always try to install the ADSL of Sierra Wireless HP un2420 Mobile "Driver package version 3.5.1308.3911" in compatibility mode.

• MediaTek MT7630E 802.11bgn adapter Wi - Fi does not work in 802.11n mode (mode-N), only G-mode

  A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1

  They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.

  Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.

  Some modifications in the parameters of the driver on the Advanced tab are problem solved.

  I think it's a bug of material, or (less maybe) a bug in the driver.

  In other forums, I heard that HP can replace the card wireless, which works well. Is it not?

  You misunderstood me. I meant, of course, all channels from 1 to 13.

  I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.

  Then downloaded latest drivers from site oficial Mediatek.

  In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.

  After you enable this mode WiFi started working in mode N well.

• no internet but not connected to the wireless router

  I have 400 SL with windows vista installed.
  Everything worked well for years, until a few days ago.
  It is the symptom, and what I've done:
  1. the laptop CAN connect to the wireless network, no problem, very strong, just signal has no internet.
  cannot ping google.ca.
  In network and sharing Center:
  Computer---> network---> Internet
  ^                   ^
  |                     |
  Red Cross OK
  2. all other devices (iphone, ipad, other laptops) can connect to the network and internet.
  3 did a system restore on the eve of this stoppped working. always the same.
  4A bought a wireless adapter, always the same. but it works fine on the other laptop
  5 tried to set a static IP, subnet mask, gateway, still the same problem.
  6. any other device can ping each other with the exception of this laptop...
  7. the seller cordless tool is uninstalled (Lenovo connection management tool)
  8 rebooted a million times between all the steps
  9 safe mode with network has the same problem.
  10 tried to use other wireless, still the same problem...
  need help...
  Thank you
  -Virginia

  Hi Virginia,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the problem, I understand that you can not connect to a wireless network on windows vista computer.

  I appreciate your efforts on this issue, however no need for you to worry we are here to help and guide you in the right direction.

  Help me with the information below.

  -Don't you make changes on the computer before this problem?

  I suggest you to disable temporarily security software and then check if you are able to connect.

  Method 1

  You can also temporarily disable the security software and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  Method 2

  Reset the router and see if that helps.

  Note: to help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  You can see this help article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Linksys E1000-N Wireless mode

  I have a problem with my router. The Linksys E1000.

  In my opinion, that it supports Wireless-N mode, so my wireless lan card which is the Atheros AR5B93 (also known as the Acer Nplify 802.11 b/g/n). When I connect to the router, it connects only mode normal wireles, so not b, g or n. But when I look at the customer router Tabel all devices connected to the router in Wireless-G mode. Even my laptop connects Wireless-G mode.

  I want to have my laptop connected to Wireless-N mode. What should I do to make this work?

  (Sorry for my bad English!)

  If you connect to 130Mbps, you are already in N mode (everything above 54, 75Mbps even limited most adapters 1/1 N). I thought that the problem in your whas OP the plain inability to be stuck with g 54 Mbit/s.

  TBH, the difference in speed between (up to 150Mbps) 20 MHz or 40 MHz (up to 300Mbps) 2.4 GHz is almost zero, unlike 5 GHz. If you visit this link , you will see that is happening in this model during a test in the two modes at various distances, where 20 MHz may even work better further.

  But if you really want to connect at 300Mbps, what is the problem if we let him just "wpa2-PSK', 'auto 20/40' and 'mixed mode' if it is already connected in N 300Mbps mode? When it is set to that, an adapter is only 54 Mbit/s if it is G only. Beware that your router might go down later to 20 Mhz (130Mbps) if other networks that overlap can be found on the channel extended because of the rule N.

  BTW, if you use only "N" and "auto 20/40" stays in 130Mpbs, by setting a channel manually * could * force it to 300Mbps even if only for a certain time (see above). " After applying these changes, always disconnect and reconnect your adaptor. If you do not, your windows reported speed will remain the same (130 when 300 is possible).

  Using a program like inSSIDer will tell you the maximum supported speed for SSID of your router

  In addition, if the customer table of your router tells you that it is in wireless mode, well, it's because it is. Wireless mode refers only to a Wifi hotspot, no matter if A/B/G/N, the opposite of being locally through an ethernet cable.

• V515w not recognized as a wireless printer

  I have a new laptop with Win 7 64 bit and it won't recognize my old V515w all-in-one printer.

  It will not print a test page or check the levels of ink or the functions of the printer. There is a network printer in my printers with a strange description of ET002000964713B.

  It works well as a USB printer. The printer sees the router correct and has the correct name.

  Never asked me to enter the password (password), like the laptop XP did.

  Much like a printer, my old laptop with XP print network, no problem.

  I have the new software and drivers I think. It will not download any firmware for the printer in

  Wireless mode. In USB mode, it said day for the firmware.

  Dell technical support basically does not help me.

  I installed HP and Canon printers for friends, and the support was much better.

  I tried to detect the Dell Sys, and nothing happens.

  I tried to download the Download Manager and it goes to a web page that has nothing to do with the Download Manager.

  Web site is very confusing when you want to tell me what software I need to download.

  After that 4 - 5 times to remove all printers and older programs and downloading different programs, I think that I have the correct software.

  Just for grins, I just tried to print a word document, and it prints.

  I think I have the wrong software Dell printer House. Nothing works with that.

  Any help is appreciated

  DJ

  DJ,

  You can download the drivers from...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Auto of blackBerry Smartphones BB 9930 disabled when wireless mode is off

  I have a problem with my BB 9930. When I change wifi on off mode. My BB self off until I turned on the device and switch wifi on.

  What happen with my BB, someone give me a solution!

  I removed my battery and insert again. I got a notification: ' your device is not connected to the wireless network to enable your wireless connection, click on connect.

  

• 100 HP Note Book PC Windows 7 Home Basic

  In my CV 1000 Note Book based x 86 PC Internet connectivity losts frequently and opened the window stucks often.

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  According to the description provided, looks like you are facing a problem with an Internet connection on your computer to Windows 7.

  It would be great if you could answer these questions to help you further.

  1. is the issue limited while accessing any particular Web site?

  2 have you made changes on the computer before this problem?
  3. are you an error message or error code?

  This problem occurs because the Internet Explorer settings, I would suggest trying the following methods and check.

  Method 1: Internet Explorer connectivity

  Refer to the steps in the following Microsoft article and check.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-IN/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Method 2: Crashes Windows or freezes

  Refer to the steps in the following Microsoft article and check if that helps.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again, the data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us updated on the State of the question and we would be more than happy to help you if the steps above did not solve the problem.

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Pavilion DV7T - 1200 CTO happened w / Wireless issues - work in progress - solved

  I took delivery on a DV7T yesterday.  It is configured with the minimap Intel 5100 AGN & Vista 32 Home premium (my first Vista machine).  I had updated my wireless router home in anticipation of his arrival, installation of a model of D - Link DIR-655 (Vista friendly 802.11n capable).  The router plays well with my existing XP laptop and has been configured for WPA2 AES & compatibility b/g/n.

  I configured the appropriate connection parameters and launched a manual connection.  I made changes to the router so the SSID was visible and defined the DV7T for automatic connection, but it took often more a minute before the DV7T would see even the network wireless and even a minute or two before reporting the signal strength. Each time, connection attempts failed, reports of a lack of response from the router.  After the double check (and returning) settings and password several times (and the audit by doing the same thing on another laptop which connected very well) I finally decided there was a problem and called for help.  Given that the order had been placed through Costco, I went through their Concierge as a first level service. Their script for was power off all computers (XP) on the network saying that a common problem was having a Vista machine join a network with XP already connected machines. No joy. Same lack of goodness after removing/reinstalling the drivers. It was as much as the script went to attempts at original resolution.

  At this point, no resolution & I plan just to return the machine for a refund (lack of wireless really it would damage the intended use). Propelled upwards all the equipment I had turned off.  Bored of not knowing for sure if it was an inherent incompatibility or a hardware problem (the day of delivery!)  I ended up out and pick up an express format card card N Wireless of Linksys.   Responsible drivers, plugged in the card and voila! immediately, the machine connects using the configuration of the connection that I had entered previously.  On top of that, the flow of data showed that 240-270 mbits.

  With this info, I went back to service, initially to the connection of Costco and then discussed in HP support. After a 3 hour marathon call, HP sends a replacement 5100AGN card to 'see if this fixes things', if it is not, the machine must go back to the service (as a problem of antennas would not be repairable client). Part of the duration of a call has been associated with finding the right part for a machine CTO.  The wireless card on my machine something SN (Broadcom) was set apart from the 5100 (although the list mentioned packing a minimap Intel next gen and the Manager device reports an Intel 5100AGN).  They have finally found a suitable part number (I hope).

  I just thought I would pass this along in case where someone else found themselves in a similar situation.  I'll post much after that the replacement property is displayed. As a side note, the Linksys N Ultra Rangeplus expresscard works really well as a replacement. Of course I'd rather not have something projecting from the side, but it certainly did the job.

  EDITION - ADDENDUM

  After the above post, I couldn't help but think that a problem of antennas sounded very probably - maybe a lead broken/disconnected (something I mentioned to the technology of the telephone service).  In any case, just a minute before, I went ahead and pulled the bottom panel, so I could take a look at the wireless card.  Technology said there would be two tracks running to the card - only was connected, the other has fallen in a crack between the card and the frame.  The wire not connected has been labeled "main" and there is a connector on the "main" labelled map  The two sons had been celo-glued to the card (in the broad sense), but I had the disconnected an oriented properly & pressed into the connector on the card.  He buttoned & turned on the machine.  He immediately finds the wireless network and connection has been made in a few seconds.

  My only ongoing question may turn out to be wireless performance.  Connection with the linksys card speeds were always above 200 (230-270).  Speeds, I see on the bed in so far have been initially lower than 100, with the best after being 150 mbits.  Any suggestions for how this can be improved?  Will the adapter 'learn' alone and get better over time?

  FINAL ADDENDUM-

  Model found on another forum that the 5100AGN has apparently a maximum 150 Mbps on a 300 Mbps max for RX & TX... the 5300AGN is 300 in both directions.

  This suggests that the 150 that I see is as good as it gets for my integrated card. Apparently, the Linksys expresscard I used is good for TX/RX 300.

  Nick

  Message edited by skhowell on 02/21/2009 08:22
  Message edited by skhowell on 02/21/2009 17:00

  I don't know that the costco guys worked just for the trouble shooting script, he gave.  On the plus side, he had an understanding of the issues, & spoke vernacular American English (and not in a call center offshore).  He was ready to continue, but I needed a time out.  The second call (after me obtain Linksys for comparison) was good enough and the technology was very ready he climbs to a technician of HP (once again, the continent - not off shore), which was certainly ready to order a replacement part, but crossed a few last checks more that the internal card could not be implemented. The part was sentenced & will be shipped without requiring a deposit of me. The only negative for telephone exchanges, it's neither opening proposed leads the lower panel to check the antennas have been connected correctly.

  As stated in the original post - edited-, the final fix was to open the Panel & visually notice that a 'primary' marked lead was not connected to the wireless card.  Attaching which lead to the consequence named connector on the Board eliminated the problem.   The disparity of the connection speeds between the internal 5100AGN and the Linksys 802.11n expresscard was due to the limitations of card design (150TX/300RX 5100AGN and 300 TX/RX for the Linksys), so the 150 Mbps I see currently for internally is as good it will become.  I'll probably send the rear replacement not opened as opposed to actually Exchange cards. (I don't think that the shipment may be shortstopped at this point...).

  Nick

• Equium M70 will not pick up my wireless network

  Hello

  I have a Satellite M70-173. Laptop will not pick up my wireless network even though it shows on the other networks nearby.
  I tried to update the list of networks, I deleted the network and added it again but still no joy. This worked OK until all
  A week ago when we had a problem with the router. We had to change to a higher channel. Could be the problem?
  I'll try a lower channel. I'll let you know if that helps.

  I have two laptops in the House and they pick up without any problem.

  Any help would be appreciated.

  Post edited by: TiaMaria

  Stand by. If your laptop can see your WLAN or not or you just problem to connect?

• Qosmio X 770 does not connect to my wireless modem

  My Qosmio X 770 does not connect to my wireless modem. The without line on the computer turns on and another computer is able to connect to the modem without problems. The Qosmio connects to the modem via a cable. The computer sees the modem and the modem is next to the computer, so range should not be a problem.

  Would help reinstall or update drivers wireless and if so, how can I do this?

  I am running Windows 7.

  Great! Thanks for your comments!