Pavilion 15-P008TX: laptop stuck in the loop of continuous reset

Please someone help me. My phone was messed up since I've updated.

This all started when I got a notification of update to windows 8.1. It was all good until the next day when I started it up and it wouldn't pick up any Internet connection, even though I knew that my router was working as I could get Internet access on my mobile. I went to the network and sharing Center and he said he was disabled so I right click on it to enable. After I clicked it, my laptop has a blue screen and came up with the following message will appear something like this: we had a problem, we collect some error information, and we will restart your device.

So, it restarted and I tried to re activate the network again and it's the same thing. After about 5 tries the occurrence of thing kept rebooting. I didn't know what to do so I thought to just restore the laptop. I did it and now it's just in this reboot loop continuous blue screen. I can't even log in window, it just keeps going to the blue window, then restarting.

This is a new laptop, not even 6 months and he was going well until I was told to update. I think just taking in the repair center that I have warranty and I feel as if I can't fix it myself that I can't in my real desk.

Yes. After the resumption, if the problem persists, call our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

Tags: Notebooks

Similar Questions

  • HP 15.6 laptop "touch screen: laptop stuck in the loop of continuous factory reset

    I brought a laptop that has been the view at Sam model yesterday.  I tried to do a factory reset, but once he gets to "Windows Setup" it makes a continuous loop.  It will start at 64% go to 100%, then restart.  When it turns on, it is always 'Windows Installer' and goes right to 64% and then 100%, then restart.  I started at 22:45 (28/07/2016) last night and it's always the same.

    What can I do to stop the program?

    Hey @GwenC,

    Please try the steps prescribed by my colleague. The path to resolution would play a HP System Recovery. You can learn more about this process here. If you have not already created a recovery media, I advise you to contact our technical support team here: (contact) / 10282847/model https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-Gaming-15-ak100-Notebook-/10402445

    The alternative who get the computers at the point of purchase for a trade (if you are still in their chronology of return).

    I hope this helps. Good luck!

  • Laptop stuck in the loop of starting

    I have a laptop that is trying to set up an update but it must connect to the internet, but as I reach the Office before I can connect to the internet-

    How to stop the system from automatically trying to do the configuration when the system tries to start?

    Hello

    You can use the solutions in this ko - 4 methods and I have listed some help for them below

    The update is not installed successfully, you receive a message, and the computer restarts
    When you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 1: start Windows Vista/Windows 7 with the Windows installation media, and then
    Use the repair feature

    How to do a startup repair in Vista and Windows 7
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to Access Options recovery if you
    have at their disposal, or use the DVD as described above.

    This tells you how to access the system - Vista Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    This tells you how to access the system - Windows 7 Recovery Options
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Try recovery options Startup Repair

    How to make a startup (Vista) repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    Method 2: start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    You can also do a restore of the system of starting with a disk of Vista or Windows 7.

    Method 3: use the downloads at the end of this article - note versions for Vista x 86 32 bit
    and x 64 Vista 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts
    When you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 4: at the command prompt or Recovery Options or a Vista disk boot

    Type or copy and paste these in one at a time (not press ENTER)

    c:windows\winsxs\ in the commandprompt
    Press ENTER

    DIR pending.*
    Press ENTER and you should see the pending.xml

    Ren pending.xml pending.old
    Press ENTER.

    -------------------------------------------

    It's the most complete method 4

    Use the Vista startup disk or system recovery options to rename the Pending.xml file and
    Edit the registry:

    In the System Recovery Options page, click command prompt.

    Type cd C:\windows\winsxs, and then press ENTER.

    Type ren pending.xml pending.old, and then press ENTER.

    Type regedit and press ENTER.

    Select HKEY_LOCAL_MACHINE.

    On the file menu, click on load the hive.

    Look for the following folder:

    C:\windows\system32\config\components

    When you are prompted for a name, type Offline_Components.

    In the registry editor, locate and then delete the following registry
    subkey:

    HLKM\Offline Components\AdvancedInstallersNeedResolving

    HKLM\Offline Components\PendingXmlIdentifier

    Exit the Registry Editor:

    At the command prompt, type exit to quit the registry editor.

    Press ENTER.

    Restart the system

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    Hope this helps sort it out for you.

    Rob Brown - MS MVP: Bike - Mark Twain said it right.

  • Lenovo Y410P was stuck in the loop of auto repair, but it came out

    So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

    TookMeAWhile wrote:

    So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

    Check the system for corruption files by running sfc/scannow in an elevated command prompt.

  • My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

    My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

    To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

    I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!
    Thanks, Ben

    OK, I found how to fix this problem.

    Go to this site download and buy the repair for Vista disc. Burn it to a disc.
    This link will guide you in burning instructions
    http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
    Start your computer with the disk and follow the instructions
    http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  • HP pavilion 17 Laptop: stuck at the loading screen

    Hello!

    So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?

    Thanks in advance,

    Giovanni

    I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

  • Pavilion g6: my laptop stuck after its original windows is installed and updated drivers

    Hello team HP;

    I recently get the support of the HP team and installed my original windows 7 Home premium using my product key. Then installed the updates wireless, Internet and network at home, but in a short time, my stuck laptop and keyboard no could not work at all except the power button. Then I installed my original windows 7 Home premium and it is, I can access although I could not installed other programs and my personal ducoment.

    My computer laptop detials:

    Note the model: HP Pavilion Notebook PC g6

    Model: g6-1320so

    So please help my problems, I don't know what to do?

    Thank you

    Hi @EID

    Thank you for your query.

    I understand that you did recently resumed, reinstall your original Windows 7 with the help of HP.  You were then installation updated drivers when the laptop froze and the only thing you could do was power, it works. You then reinstalled Windows 7 again, but can not install other programs or your personal documents.

    Have you tested for hardware failures? Screening of hardware failures (Windows 7, Vista )

    Have you checked against viruses and malware?  Malicious software removal tool

    Like you just HP support help with your original Windows 7 installation and the problem appeared after that, I suggest you contact HP support for assistance, especially since you have reinstalled again and are always problems.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    Good luck!

  • Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

    I have a Satellite C660-115 which is stuck in a loop "of despair".
    I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

    I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
    No problem at all with the restoration.

    Started doing the updates for Win7; SP1 seems to install OK without errors.
    The system then picked up 37 Win7 updates automatically and asked to reset.
    Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
    It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

    I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

    How to exit this loop? What is causing this problem, which I have never seen before?

    No software has been installed, other than that of the recovery process.
    I even uninstalled McAfee, just in case this could be a problem - no change.

    Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    It identified the rootkit and removed.
    Seems to be OK now!

    Hope this post could help others.
    Of course, the factory restore does not erase the HDD MBR rootkit...

    Thanks for sharing!

  • Mail stuck in the loop. Cannot access same Mail preferences!

    Hello to you all. Can anyone help? I'm trying to set up Mail (in lieu of Thunderbird) I want to use the possibilities of synchronizing with Mail on my other Apple devices. The title says it all, and I have attached a screenshot of what I see. Impossible to do anything, except to force them to leave cannot even open Mail preferences! I'm on iMac with El Capitan Version 10.11.3 Mail Version 9.2 (3112). Henry

    Hi Aitchb65,

    Thank you for your participation in the communities of Support from Apple.

    I see that the mail is stuck in a loop and the opening of many windows unexpectedly. Try to run Mail in 'safe mode' by following these steps:

    Open Mail and immediately hold down the SHIFT key until the Mail is opened. This causes the Mail to open without any message or box to the selected letters.

    Of Mail if closes unexpectedly when displaying certain messages.

    If the Mail normally opens, try to update your SMTP settings -Mail (El Capitan): list of outgoing mail server settings.

    You can also delete email accounts in Mail preferences and start over after export and save all important messages. To help in this part, see Mail (El Capitan): Configure Mail with your email accounts and Mail (El Capitan): import / export the mailboxes.

    Sincerely.

  • Servo motor gets stuck in the loop

    My project is to control two motors from the pedals with LabVIEW in combination with UMI-7774 and PCI 7350.

    I use a traditional format of State Machine to simultaneously control two motors according to the absolute position mode.

    In one of the first States, both motors are wound manually by using the speed mode (to make a desired voltage).

    In a later State, the motors are wound to a position specified by the user when you press a foot switch. When you press the other pedal, they are then held in the previous "original" position

    After the first "Tension" indicate when the winding engine and the course due to the pedals is running, the program gets stuck in the State of wind.

    Although drivers are told to go to a specific position, they never move and that's why the program is unable to move to the next State.

    I've attached a screenshot of the winding State where the program is stuck (the engines are not mobile, so when the final position is to compare it with the desired position, the loop continues to go).

    Help, please.

    CAT

    I solved the problem.

    States "Wind engine left" and "Right wind engine" speed has been put back to zero. When the program moves toward States of wind/flow, the speed is always zero (the engines cannot move).

    I simply set the speed value desired in each of the States LBL/RBL (that allowed the engine to get to the position of desire).

    Thanks for all the help,

    Catherine

  • Laptop stuck on the screen to "prepare the AutoFix.

    My laptop HP a few months came pre-installed with windows 8. When I tried to start it this morning it came with the screen to "Prepare the automatic repair" and is pasted on it. It is not off or change to a different screen as "scan your computer. I'm sure that it does not start in safe mode by pressing f8 or shift + f8, Ive tried several times. I don't know what to do because it's just stuck on the same screen "prepare auto repair.

    This is not a good thing. The long test. Post the results here.

    The result of the test is indicative of a hard disk failure requiring the replacement of the hard disk.

    Contact HP for a replacement under warranty hard drive. You will need the failure status code providing for the drive test hard when you contact HP.

    It's time to find your set of recovery disks. You will need to install the operating system and the software that came with your laptop.

    Best regards
    ERICO

  • Stuck in the loop now accepting the new terms of use on Xbox Live Please HELP!

    I am stuck in a loop of redirection while trying to accept the new terms of use for XBox Live. I have a child account parental consent is required. I KNOW im putting the good info because when I put wrong information, it tells me that the password is incorrect. When I put the correct information and click identify you, let's return to the page where I have to click on I accept. Is this a problem with Xbox.com? Is this a problem with my account? Can someone please answer this question? Ive been very angry, because it has been updated. Please, I just want to play online and talk to my friends. Any help would be highly appreciated. Thank you!

    Try Xbox support:
    http://support.Xbox.com/en-us/

  • Out of the box Alpha stuck in the loop of repair

    Just got my new Alienware Alpha, plugged into the TV (Panasonic TC-P42ST60), and set up as usual, but after turning on it starts up to the Alienware logo then restarts, after reboot it gets captured it repair your PC loop, finally giving me the blue screen of troubleshooting.

    I tried to use system restore to factory Dell but it is always the case. When I try to start in safe mode, that it says windows need to finish to install everything first and then restarts.

    I am stuck in a loop.

    I managed to pinpoint the problem.

    I plugged the Alpha on an Asus computer screen, then he worked as usual, it seems that Alpha can't handle the EDID HDMI to Panasonic TV. I noticed at the start that he said 1080p@50Hz instead of 60 Hz and this was to launch Windows.

    I'm going to continue with the installation via screen Asus and I hope that force 60 Hz in display settings, so it does not work with the TV.

  • Stuck in the loop of the license of this software - Adobe has no idea CC2014

    For weeks now, I was stuck in a loop of having to "license this software" or "Starting the trial", when you try to start any Application of CC. I started, because I downloaded CC2014 and also occurs when you try to start my old apps CC.

    Have been on mail and phone with Support Adobe several times and for hours. Support has been very helpful, but after remotely, they tried to do almost everything with my Mac and installing CC, it is clear that Adobe have no idea what is causing the problem.

    The forums are full of solutions to that of other users with the same issue, but none of this helps. I have and support have tried everything.

    I'm a little more luck than others, since I can run my Adobe applications in trial mode but with left (?) 00 days. Others may even open their applications.

    I am posting this in hopes to gather all experiences I and other users have this troubleshooting with Adobe. I have case No.: 0185617726 that has now taken the magnitude for the third time.

    Flemming

    Just completed another session of 2 hours on the phone with support and they finally found the question :-)

    For some reason, there was a time offset in the log files (~/Library/Logs/amt3log) opened in the Console and the current OS time/clock set automatically by my time zone.

    Supporters managed to align the time while he was good in the BONES and newspapers (don't know how but terminal performer of some commands etc.)

    If everything seems to work now, and I'm a happy user of Adobe still :-)

  • Install patch audition 3.01 stuck in the loop

    Hello

    I had to rebuild my Windows 7 disc and reinstall all applications.  All adobe products updated and running, except the hearing.  When executing 'Audition 3.0.1 Patch Setup.exe' TI gfets stuck in a loop and will not be complete.  Any suggestions?

    (1) application of language - English

    (2) Welcome to... Next >

    (3) license agreement - accept

    (4) Welcome to... Next >

    (5) license agreement...

    A few loops around these steps and is not complete.

    Thanks for any help!

    Peace

    PS: Windows 7 64-bit, SP1 build 7601 - all of the windows updated to February 16, 2014, Lenovo y550p, 8 G of Ram

    I appreciate your response and tried the link you gave. I get the same loop of install.

    There must be something on my system - although I just reinstall the OS from scratch, all the windows updates, etc... everything is freshly installed with a missing component.

    I was hoping that maybe a personal Adobe could be LURKING on the forum and have a preview, if there is no peer solutions.

    Thanks again.

Maybe you are looking for

  • How will I know if I'm connected to my computer laptop and desktop are kept synchronized?

    I clicked on help in the menu to see if there is some sort of indication that I am connected, so the laptop and desktop computer are synchronized to the top, but I do not see how to disconnect or "UN-sync '.

  • Satellite C855-1U7 - activity strange fan while playing games

    Hello I played fifa14 for a long time, my laptop had the necessarily system requirements to play and my bios is the last, often my fan started working for many, up to 85% and 74ºC cpu temperature, it is normal because of the game, but in some time th

  • Many applications crashing.

    If a lot of my apps to Apple Watch block, so I decided to send my Apple Watch for the service. Apple has not noticed hardware problems, but they did a reinstalled new watch OS2.I received my watch again and I still have the same problem, I tried to r

  • Email disappears in Windows Mail

    Two questions developed with my Windows Mail program the other day.  First of all, when I open the program, I noticed the mail in my Inbox appears in bold, even though it has been read previously. Secondly, when I open the program, the mail in my Inb

  • Log-on Vista is very slow: problem report: AppCrash LogonUI.exe

    Hello My computer is able to open a session, but it is extremely slow. When I checked, for a problem, this is the error message I got:Problem event name: APPCRASHApplication name: LogonUI.exeApplication version: 6.0.6001.18000Application timestamp: 4