Pavilion 15ab020ca: keypad touch definition has not registered after upgrade Windows 10
Same problem here. I need to change the setting so that 1 finger scrolling works every time after a reboot.
Hello
Try the following.
Hold down the Windows key and press R
In the run box, type regedit and press enter
In the registry editor, navigate to the following
HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install
Inside, look for a key named DeleteUserSettingsOnUpgrade
If it is present, right click on the key and select Edit
Set the field data of the value 0 (zero) , and then click Ok.
Close the registry editor.
Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows. DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv. I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.
Thank you for your response. I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP. In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list. I decided to try this simple fix before one of the more complex solutions that were offered. The simple solutioon worked!
-
Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate
My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.
Help please
Hi asalamk,
The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools
You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.
-
HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10
About 6 weeks ago, I downloaded Windows 10. Today, I tried to analyze something and received the message "no Scan Options". So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.
Hello
You will probably need to reinstall the HP software after an upgrade of the operating system.
Please follow the steps for exactly the problem and check for the difference:
Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.
If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:
http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe
Kind regards
Shlomi
-
HP Laserjet 2100 does not work after upgrade Windows 10
HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...
Thank you!
If the printer is connected using a parallel printer cable, please see the link below for the solution.
-
Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10
After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch. I looked for a driver on the HP site and it required me to download the HP Support Assistant application. In other words, the site would not just download an update to the driver. After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end. I think I just need to be able to download the latest driver, but the HP site will not allow it.
Hi there @jazzquilt,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.
HP 23tm LCD Monitor - driver Windows 10
Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
-
Pavilion dv6 sd card reader does not work after upgrade to windows 8
Hello
My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop). I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?
Hi SanSam.
Thank you.
Install the driver from Realtek for Windows 8 card reader.
Please post your results.
Best regards
ERICO -
HP 8 5901 flow not 4g after upgrade Windows 10
OK, so after upgrade my Tablet (5901) flow 8 to 10 windows it does not read my t-mobile sim card and I can only connect to wifi. is there a solution so that I can get 4g I use this tablet for work and theres no wifi to my work... Thank you
from today I received jusr of updates of windows about 10 minutes ago and I now have a 4 g yet! Thanks for your help
Anyone who has this problem just keep checkimg for the critical windows updates!
-
Dolby audio driver does not load after upgrade Windows 10
Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)
Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.
Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.
-
B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.
AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.
I installed the driver below and my problem has been fixed.
I hope this helps someone else?
Mod edit: System model added to the front of the subject line to improve visibility / clarity
Thank you for the help with the Forum. I find the help I need with my new Lenovo.
-
USB ports not working do not correctly after upgrading Windows
A few weeks ago, I did the usual update recommended for Windows Vista, and since then, my USB ports are not working properly. Im not saying that they don't work at all, but there is only one (out of 3) which will be synced my ipod, and yesterday while trying to reinstall my HP Photosmart c4795 printer, it will not recognize the device when I plug it into any port. The question of the ipod which happened AFTER the WINDOWS update. There is some difficulty that has been put there I don't know?
Hello
Check if driver nay optionally implemented to date have been installed on your computer, if yes, you will need to remove these updates and check if that helps.
To search for updates follow the link.
http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed
To remove the updates option if necessary, follow the link
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Venue 11 7140 pro micro HDMI does not work after upgrade windows 10
Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.
I have thus display driver problems on 10 to win.
For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.
The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.
I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.
It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.
-
HP Pavilion x 2 10-n011nl (Suns: laptop locked after upgrade windows 10)
Two days ago, I bought a HP Pavilion x 2 (red sunset) 10-n011nl and immediately I started upgrading Windows 10. This medication is ok (no error message), but the first new starting system, the machine is in a loop! Only a black screen with white logo of HP and animation circular points. It is impossible to stop this, none CTRL-ALT-DEL or other. I have to wait for low battery condition (more then 6 hours!).
And even once, he repeats the loop.
What can I do?
Thanks in advance
Because it is new, maybe start to type Esc as soon as you press the button start. That should bring up a menu before starts the boot process. In this menu, click F11 to run the recovery. Who will restore the PC to 'new factory' and retry the upgrade of Windows 10. You might want to try the media creation tool page, if it fails again.
-
Battery not detected after upgrading Windows 10
Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.
I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?
Thank you!
Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.
-
HP Pavilion does not start after upgrading Windows 10
(Sorry for my bad English)
Last night I started to update my HP Pavilion Windows 8.1 to 10, but I have a problem, because today, in the morning, the update was 99%, and it ended, just after I have shut down the computer and is going to school and when I got home, I turned on my HP and the problem was that the HP logo appeared and he began to load , but he didn't only show anything else than that, so I thought I'd let load after 3 hours, it was still loading and it was reseting every 5 minutes and now I just can't not try windows 10. Help?Hi there @lmao1,
Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that once you tried to upgrade to Windows 10, now stuck on the HP Logo at startup.
If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.
Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
Have you tried a hard reset?
Have you tried to Test for hardware failures?
Are - that you receive error messages or error codes?
You happen to see a blue "option ' screen at all? '"
Follow these steps to remove and reinsert the memory modules for troubleshooting:
Maybe you are looking for
-
Every time when I connect my new external 1 to (2.5 ') USB3.0 HDD of my PC, there is automatically a virtual cd drive. It only contains the manual and a link to the 'revolutionary' Toshiba market and there is no way to remove it permanently.The whole
-
Satellite Pro A40 - cannot connect WIFI tstablish
Hi guys I have a Satellite Pro Model: PSA45E - 0184H - EN Problem is I can not establish a wireless connection, the laptop can not be set automatically detect wireless networks? Any help would be appreciated. Thank you.
-
Why fewer photos or videos imported in the Photos in iPhoto from same source? When you import photos and videos from iPhone two more 6-phones an iMac 27-inch (10.10.5) with iPhoto and a 13-inch MacBook Pro (10.10.5) with pictures, I get a different n
-
low disk space on recovery d can I empty d ' drive on usb?
Disk space low recovery d. Can I erase disc to USB portable memory
-
StackLayout works do not (children that overlap)
I'm trying to use the StackLayout in AIR BB10 application for the first time and things are not stacked. Example code: package { import flash.display.Sprite; import qnx.fuse.ui.dialog.AlertDialog; import qnx.fuse.ui.text.Label; import flash.events.Ev