Pavilion 17-e051so: HP PC Hardware diagnostic 3-in-1 USB key

Where can I get the USB HP Diagnostics of material 3-in-1 key?

When I try to install ftp://ftp.hp.com/pub/softpaq/sp72501-73000/sp72954.exe download, I get an error message that Setup file is corrupted. I downloaded it twice.

Hello

Thanks for posting in the Forum from HP Support.

This file is a great one (1.2 GB). Maybe it gets corrupted during the download process (for example if your have antivirus software that is not well configured, if the download goes through the proxy server, etc...)

This is the correct URL you have. More information here > http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/dt

As indicated in the URL above, there are other methods to test the computer (for example the integrated BIOS/UEFI options).

Tags: Notebooks

Similar Questions

  • HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

    Hi all

    I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

    The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

    Any help will be appreciated

    Hello

    I realized a work around:

    Secure boot off

    Legacy support on

    and here's the big one

    Boot HDD in legacy should be last on the list

    The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

    Thank you

  • HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

    I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

    PXE - m0f: exit pxe rom

    no bootable device-insert bootdisk and press a key

    Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

    Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

    Hi @gretschman7,

    Thank you for your query.

    I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

    "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

    Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

    Please let me know the results.

    Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

    To show recognition for my efforts please click the Thumbs Up below.

  • Pavilion p6537: 6.0.5418.39 Hardware Diagnostic tools

    After the upgrade to Windows 10, my monthly hardware diagnostic tool did not work. Received a device discovery error suggesting I restart the program or restart my computer. I performed two operations and diagnostic tool still does not work.  Would that be the upgrade of Windows 10 or just a corrupted file?  Never had a problem with this tool before.

    Hello

    Are you referring to the HP Support Assistant?  If so, uninstall the old version via the Control Panel - program and features, and then install the New HP Support Assistant.

  • HP Hardware Diagnostic tools

    I had to do a clean install when upgrading to Vista 64 for Win 7 64 on my HP Pavilion Elite 9160F. Now I am unable to find a download for HP Hardware Diagnostic tools.

    I tried to install an update that was supposed to include most of the tools, but since I did a clean install, it says that my system did not meet the requirements and that it refused to install.

    Is it possible that I can install the Diagnostic tools?

    You may be able to choose the tools off the HP recovery discs.  Software updates listed here are only updated.

  • Hardware diagnostic tools error pcdrsinfosystemboard.p5x has stopped working

    pcdrsinfosystemboard.p5x has stopped working message each time I have start hardware diagnostic tools in vista Home premium on hp Pavilion slimline s3700y pc

    My hardware diagnostic tools came pre-installed on my pc when I bought it. I didn't uninstall with revo uninstaller to get rid of all the remains and re-installed using the Recovery Manager. It has been fine since. I hope this helps someone in the future, which could run into this same problem. Thank you for asking. I always wanted to help out where I can in the field of computers, I get so much help from others.

  • Hardware diagnostic tool

    I have a HP Pavilion G7-1329wm running windows 7. I does not seem that hardware diagnostic tool program.  He seems to be spent on other portable HP like mine, and so I was wondering if there is a place I can download it? I used a link (sp4437.exe) I found on the forum, but after installing it, it says 'this version of diagnostic tools is not approved to run on this system. Y at - it an older version that I need?

    Thank you in advance!

    Your computer uses a Diagnostics UEFI support environment to test the material for questions. Please see HP computers - UEFI and the Start Menu for instructions on using the features of Diagnostics UEFI. Hit "F2" or "ESC" then "F2" at startup should show the UEFI Diagnostics page.

    Download and install the environment of Support HP Unified Extensible Firmware Interface (UEFI) for a version update of the UEFI Diagnostics.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Monthly hardware diagnostic test

    Top of A6510t HP desktop computer.

    Question of hardware diagnostic tools

    My monthly hardware diagnostic test ran and it showed:

    in the category of instruments 'storage '.

    storage-"smart auto court" has failed. It had on it. HD521-2W

    She supposed to check help and support center but that was no help to me at all.

    Can someone give me an idea what I'm up against? I don't know even where to start.  If I was a technician, it would be probably better.

    Thank you in advance.

    Your questions are valid and thoughtful.

    If the plan is to backup your important files, etc. on an external hard drive and nothing to do with the old PC, so you don't need a 3.5 "SATA hard drive to replace the other.

    Your question: "so I guess I'm asking if record these things on the external hard drive will allow me to have these things available to put on a new computer should I have to? Yes.  You will not need the OS or recovery disk\usb license information because your new PC media comes with a.

    It is not a simple matter of connecting the disk external usb passport to a usb port on the new PC and using Windows Explorer to search for and copy them to your new PC.

  • What is 5.1.4861.15 hardware diagnostic tools

    What is 5.1.4861.15 hardware diagnostic tools

    Hi Floyd,

    If I am right, it is actually PC-doctor, Inc. Hardware Diagnostic tool which is distributed by some computer program of PC Doctor OEM manufacturers.  The number seems to be a somewhat older version (possibly published with XP systems).  They still do and I have versions for XP, Vista and even Windows 7. If you have upgraded your operating system, the program may or may not work more.  It doesn't seem to be something that you can buy directly (and I don't think that it can be upgraded) - but your computer manufacturer might be able to say more about it.

    Here is the current information on Program OEM's PC Doctor: http://www.pc-doctor.com/pcd_windows.php.  I know that HP and Compaq and Acer and Fujitsu used and can still - and I saw obsolete links and now gone listed this specific version of the program on their systems - but none of their websites discuss the version even if some do not discuss the existence of a program of diagnostics of equipment and how to use it.  Here is an example: If the computer is running XP so that it looks like this (unfortunately not a download link, just info): tests for hardware problems using PC-Doctor - HP Customer Care (United States - English).

    I don't think that it is malware - if I'm wrong.  If your manufacturer says that it was never installed on your computer, so I guess it's possible, but I found only about above it and no mention of all malware related.  In any case, if it was never installed on the system by the manufacturer, then I would probably not use it and may even consider uninstalling just to be on the safe side.  If it has been installed by the manufacturer, try running it to see if it provides you with hardware diagnostic information.  If it crashes or fails to run if you have an operating system upgraded from the original installed OS, then it is probably not compatible and I would just uninstall it as it will be of no use and cannot be upgraded (unless the manufacturer provides one, but it is unlikely) and is just too much room.

    Yet, it can't hurt to run some checks for malicious programs.  Update and run a scan complete with your current AV program.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If they are all come clean and do not show this as a problem, then I would say it is more likely is not malware and don't worry in this regard.

    I hope this helps.

    Good luck!

  • Reinstall the hp hardware diagnostic tool

    I don't know what happened to my HP hardware diagnostic tool. I used it once when I got this computer and sometimes since 2010. It happens in the start menu, but do not work. How can I reinstall it?

    Thank you, Ken

    Hi Ken,

    This tool is a tool of Hewlett-Packard. Get you from HP.com. Its updated regularly, then you are better off to go to get the latest version anyway. Just enter your HP product drivers of the help section, and then select your operating system and get the download of the resulting list.

    If you have any specific questions, post it here and I will help you. Let me know how you fare.

    Kind regards

    BearPup

  • The hardware diagnostic tool advises that the SMART short self-test has failed.

    The hardware diagnostic tool advises that the SMART short self-test has failed.

    Is this a problem? What can I do about it?

    Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

    Is this a problem? What can I do about it?

    Hello Atelier42, this usually indicates that you have a hard disk failure.

    I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

    You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

    With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

  • G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

    Hello

    I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.

    I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen

    By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.

    Product: Model LAPTOP computer: laptop HP pavilion g6
    Product number: QG470PA #ACJ

    OS: Windows 7

    Thank U
    Look: -.
    EDWARD07Hello,

    I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.

    I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen

    By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.

    Product: Model LAPTOP computer: laptop HP pavilion g6
    Product number: QG470PA #ACJ

    OS: Windows 7

    Thank U
    Look: -.
    EDWARD07

    EDWARD07

    Hello;

    Let me welcome you on the HP forums!

    According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

    To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.

    You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.

    But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

    When you download this file, it will be an ISO file.

    To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/

    Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

    To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/

    Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
    -------------------------------------

    Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

    You will probably need to run Startup Repair three times for him to fix all the boot loader.

    Once completed, your PC should start OK.

    Good luck

  • Pavilion 500 t - not accessible when starting from CD USB key

    I am booting from a CD on my Pavilion 500 t to restore an image from a USB key.  I can boot from the CD fine, but after loading, my recovery (Ghost) software my USB key is not accessible.  Any ideas?

    Hi Steve,.

    Please report the number of HP for your PC product.

    How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers.

    You say that the ghost can not find the USB? If Yes, then try a USB 2 port.

  • USB key is not considered to HP PAVILION CORE I5 and MS 7613

    Hello

    I just got my new HP desktop HP PAVILION CORE I5 motherboard MS 7613 and im trying to install windows 7 without success, because in the BIOS the usb memory key does not START options. Don't see these settings in the bios to boot:

    Floppy boot priority group - not installed

    Group - HP DVD-RAM GH60L CD-Rom boot priority

    Group ST3100052AS HARD drive boot priority

    Network boot priority group - not installed

    More than that, I tried testing with two different usb sticks in different USB ports and the system could not start when trying to install windows 7. The two sticks were properly formatted and I have done some testing old NetBook of the mine and windows 7 have been successfully installed from two flash drives.

    One of my usb stick http://www.amazon.co.uk/PNY-Transformer-Attache-Flash-Drive/dp/B009J0HM94

    Second removable disk is named pro usb drive

    Also two usb keys are seen in the bios on the USB PORTS SETTINGS

    Any direction to help me to windows on my machine is very appreciated.

    Thank you, Bobby

    Check in the BIOS for Secure Boot settting_it must be disabled before the CMU machine can boot from any source in addition to the hard drive. Also activate the Boot legacy. Save & Exit.

    When starting with the USB key, press ESC immediately after turning on. This should bring up the boot F9 option where you use the arrow key to move to the low to highlight/select USB Flash. Press on enter.

  • G7-1222nr Pavilion: hardware diagnostic test failed

    ID of congestive GSMAXS - S 5, 9859 - MFPV5F - 60W503

    Rebecca Goveia

    Here's a technical video of hard drive replacement. Not too difficult.

    https://www.YouTube.com/watch?v=nSq-sWUFyOc

    Your laptop can use any 2.5 inches wide and 9.5 or 7 mm thickness mobile SATA hard drive where solid state drive. Although they are a little more expensive, I always recommend an SSD instead of a mechanical drive since the upgrade of performance is something you must see to believe. Most of the people who went to SSD swear that they will never return to a mechanical HARD drive. However, some people are on a budget, I know. Portable hard drives are more exotic products. You can pick one up at Best Buy or even Office Depot or order a delivered in 2 days on amazon.com

    Here's a good example of a 1 TB hard drive 7200 rpm:

    https://www.Amazon.com/HGST-Travelstar-2-5-inch-internal-0J22423/DP/B00B4QESVQ/ref=sr_1_1?s=electronics&ie=UTF8&QID=1466337733&SR=1-1&keywords=2.5+inch+7200+RPM+hard+drive

    Here's a concert 480 SSD:

    https://www.Amazon.com/SanDisk-Ultra-2-5-inch-height-SDSSDHII-480G-G25/DP/B00M8ABFX6/ref=sr_1_10?s=electronics&ie=UTF8&QID=1466337813&SR=1-10&keywords=500+gig+SSD

    If you need assistance. Was the computer laptop all upgraded to Windows 10?

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Card memory stuck in my Equium A210

    Can someone suggest an intelligent way to get the memory card to the player on the front of my laptop? My girlfriend has placed a non compatible card in the reader and he has to stay out of my reach, I tried to remove it with tweezers, but have had n

  • Problem with installation of Boot Camp in windows 10

    Windows 10 installed perfectly on my Macbook, 13 "mid 2013.  Although, when I'm on windows and try to install the Boot Camp Installer, it reached about 50% and stops.  The status shows "Realtek Audio".  I already re-formatted flash drive, entered the

  • Z230: How to turn on hardware virtualization on HP Z230

    The Hyper-V platform will not install because I have to first enable hardware virtualization. I've done it before on multiple computers. But on the new Z230 HP I just unpacked it, I can't find the setting in the BIOS. BIOS version v01.42 L51 ME Versi

  • ScalableGraphics and net.rim.device.api.ui.Graphics

    I was robbed on a bug in my SVG code for too long and now, I discovered that I can use the bad Graphics class. ------------SNIP------------------------ scalablegraphics.bindTarget(graphics); for(int i=0;i

  • Dell windows 7 free upgrade

    Hey has any who actually received the update to windows 7? I bought my laptop on 10 July and my service tag not yet in the database dells. It has been good for 10 days. After many calls to dell the thing only customer service can tell me to wait 10 d