Pavilion 17-f159nr: WiFi on Windows 7 and HP Pavilion 17-f159nr driver problem

Similar Questions

• Upgraded to windows 7 and also a new hard drive

  I have a 2005 HP m7060n Media Center http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00306958 & lang = to & cc = us & taskI... running on XP
  I was looking to upgrade to Windows 7 and also install a new drive.  New readers are shipped with windows 7 already preinstalled and when I change the disks, it will start windows 7.
  How could I then exchange the old files to the new drive?
  What is your solution the best and less expensive?  How do you do this?  Help, please.
  Thank you
  Marco

  I suggest that perform you a clone of the hard drive. Seagate drives and WD offer a free version of the wizard disk.

  Clone the original 200 GB drive to the new drive.  To avoid problems, has chosen a 1.5 or 1 t T drive. Once you have the clone, just install the upgrade on the new drive. All your data will remain intact, and the intact original of 200 GB drive is secure.

  PS > you need a spare sata power and data leads to the clone. Look inside and see what led power is hanging loose. Then I can suggest an adapter or cable. As the DVD is IDE, (not Sata) from what I've read, you will need a Sata data cable also.

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• running windows 7 and can't find a driver multimedia controller to support my sound card that previously ran on xp

  I am now running windows 7 and can't find a driver multimedia controller to support my sound card that previously ran on xp

  Hi, Wally158

  I suggest to check the following website: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Browse.aspx?type=Hardware&category=Graphics%20Cards%20%26%20Components&subcategory=Sound%20Cards

  It lists Windows 7-compatible sound cards, look for your card it should tell you with its compatible. If it is compatible, it also indicates if the driver downloads automatically or you may have to download via a website.

  Keep us informed

  Thank you

  Smithy.93

• I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups sayi

  I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups saying that the # is not valid. Can someone help me. [deleted]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Error "serial number is not valid for this product". Creative Suite

  In addition, if you have El Capitan, click on the following link

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

• Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems, and they could not be resettled. Help, please!

  Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems.  I tried to correct by using Troubeshooter and the Device Manager, but not luck.   The computer was upgraded to Windows 7 Ultimate this year. Help, please!

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-General/27512-terredo-tunneling-etc.html

• G6 2255 ev Pavilion: hp pavilion 2255ev g6 driver problems

  Hello
  I recently formatted my pc and I installed windows 7 64-bit.
  the problem is that I installed all the drivers on the site and some did work ' t, other appears not to my laptop.
  could you please tell me the EXACT drivers, should I put in my laptop to work properly?
  Thank you

  Hello:

  Use the W7 x 64 drivers and software the g7z-2100 except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  For the usb and smbus controller, try the driver for chipset amd from the link below... first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• G4-2003tx Pavilion: I have driver problems

  Kindly need drivers for next compatable Ids

  PCI device

  PCI\VEN_10EC & DEV_5229 & REV_01
  PCI\VEN_10EC & DEV_5229
  PCI\VEN_10EC & CC_FF0000
  PCI\VEN_10EC & CC_FF00
  PCI\VEN_10EC
  PCI\CC_FF0000
  PCI\CC_FF00

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & REV_04
  PCI\VEN_8086 & DEV_1E22
  PCI\VEN_8086 & CC_0C0500
  PCI\VEN_8086 & CC_0C05
  PCI\VEN_8086
  PCI\CC_0C0500
  PCI\CC_0C05

  USB controller

  PCI\VEN_8086 & DEV_1E31 & REV_04
  PCI\VEN_8086 & DEV_1E31
  PCI\VEN_8086 & CC_0C0330
  PCI\VEN_8086 & CC_0C03
  PCI\VEN_8086
  PCI\CC_0C0330
  PCI\CC_0C03

  also my web cam not working not

  Please advise

  Hello:

  You need these drivers...

  SM Bus controller: install this driver first, then restart the PC.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp55970.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55978.exe

  USB controller:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp55975.exe

  You need this software for the webcam.

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  File name: sp61279.exe

• Pavilion 15-ab063tx: 15-ab063tx Pavilion network controller driver problem

  Hello

  I just bought a new 15-ab063tx Pavilion and after format, I have a wireless network connection problem. For the network local network it works well but I can't find the wireless network adapter. On the device he received the error this network controller driver problem. Can someone help me.

  Realtek Wireless:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4158

  Bluetooth:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147638_1&swEnvOid=4158

• I just installed firefox 4. I have windows 7 and IE 9 0n my computer / problem is NO sound on youtube videos. Upgrade to the latest adobe. Help?

  No sound on anything whatsoever.

  See:

  • What to do if Firefox will play not all sounds
  • Difficulty common audio and video questions

  You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
  
  You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
  
  You will see only the Firefox program in the mix if you are on a website that plays sound.

• License with Windows 7 and the Satellite L875 - 11 M problem

  Hello

  I recently (about a month) sent my computer to TOSHIBA because of a hardware problem, so I think they changed the PCB from what I remember. My computer is a Satellite L875 - 11M and I am on Windows 7 Home Premium.

  Since yesterday, I lost my wallpaper on the desktop (do not know if it is normal or not) and got a popup telling me that my copy of windows 7 is not genuine. I tried to turn it on, but it has not been accepted as valid. I searched a bit on the Internet and found that the license key is linked with the BIOS of the motherboard, which may have been changed a month ago, so it seems to be the source of the problem.

  How can I solve it? Asking Microsoft for a new key to license, or Toshiba, or is there a simple procedure? I already tried the 'slmgr /rilc"and"slmgr /rearm"orders with no result.

  Recorded on label product key Microsoft belongs to the original version of recovery that you got with your laptop, so it cannot be used for activation.

  I can't explain why pre-installed version has expired, but you need to do now is install Win7 with original Toshiba recovery disc. After doing this you have will activate and original OS version that belongs to your laptop.

  I just hope that you created recovery disks Toshiba s advice.

• Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

  I'm sure that this request has jumped several times. I've recently upgraded hardware and software being windows 10. All devices being Ipads, Ipods and Iphones are not recognized in iTunes once connected to your PC. The PC is to recognize that a device has been plugged in with the usual beeps. I've seen drivers and it seems that usb iTunes etc is not listed. How this can be fixed. Thank you inadvance for advice

  Hello, Aubin Grove,.

  Thank you for using communities Support from Apple!

  I understand that your iOS devices are not recognized by iTunes when you plug it into your computer. There may be two different causes for this type of situation, but we have some great troubleshooting to help you resolve this situation.

  To begin the process of diagnosis, I would suggest reading over and working through the information mentioned in the following article.

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  See you soon!

• Upgrade to Windows 8 and put to update the driver now no sound

  I upgraded to Windows 8 recenrtly and downloaded the last "HD audio driver HP".  Now I have no sound for my laptop.  The only time where my speakers work are when I select the audio test wizard HP support option.  Any help gratefully received!

  My product number is LS499EA #ABU.

  Thank you

  Mark

  Have you tried installing the driver from Windows 8 for this PC?

  Please download and install from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58727.exe

• Desktop HP Pavilion p6130y PC, installation of Windows 7 on the new SATA hard drive problem

  First of all, I can't find the model p6130y number on the HP Support.  The original hard drive came out and it was replaced with a Seagate SATA 850 GB drive, buy Windows 7 on DVD and I tried to install. Obtained through formatting the drive. Their only option now is to "Load a driver."  He says that I need to locate the HD driver on the media and press OK.  I can't find such an on installation disk so will try the find the right HD drivers for this model computer download on a USB key. Any ideas?

  Hello:

  Here is the link for the driver sata for your model:

  Just download it and do not run it.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-77141-1&cc=us&DLC=en&LC=en&OS=4063&product=3980095&sw_lang=

  The motherboard in your model has major problems with the drives out and that the results in the hard drive and DVD drive from the BIOS endangered.

  It could happen to your model, it's why W7 cannot find the hard drive.

  You will need to download and install this free program.

  http://7-zip.org/

  After installing 7 - Zip, right-click on the Sata driver you downloaded and select 7 - zip option in the list.

  Select extract to: I leave extract the name of the file and extract the exe file in a folder of driver.

  Once you have the file, open it and copy the contents of the folder on a drive portable usb flash without the src folder.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install correctly.

• How can I set up to dual boot Windows 7 and XP on 2 separate drives?

  I have a new hard drive and a new DVD Windows 7 Ultimate 64-bit upgrade. I want to keep my old hard drive with the ability to work under XP. Can I just install my new drive in any open slot, and then start from my DVD? I'll be able to start on the player of my choice? How does with the marking of the readers? And it defaults to Windows 7 whenever I start my computer? How I will be when you start the disk with XP?

  Hi ohyanet:

  Since you are using a version of 'Upgrade' of Win7 it will assume the license of the prior XP operating system and the Microsoft EULA says that you can no longer use your XP operating system on any computer.  To dual boot with XP'd you need to buy a version "full" of Win7, not an upgrade.  When you install Win7 it will make a copy of XP called Windows.old in your drive (C :) and you can copy the files from it to your new O.S. of Win7, but you will need to re - install all the applications from the original media.)