Pavilion 17F1023CL: lost my ethernet cable connection.

Similar Questions

• I just loaded windows XP on my old tower. I have an ethernet cable connected to my modum but I can't establish an internet connection.

  I just loaded windows XP on my old tower. I have an ethernet cable connected to my modem, but I can't establish an internet connection.

  You are welcome for the answer. You will need to use a cd/dvd drive or a removable media like a flash/USB device to transfer the file on the computer in question. You can download the LOM Broadcom 10/100 Ethernet controller driver from HERE.

• Satellite P750 - no ethernet cable connection

  I have a Satellite P750 running on Windows 7.
  When I plug the ethernet cable, I have no connection.
  The same cable works fine on other PCs.
  The network is set to obtain an IP address automatically. The network connection uses RealTek PCIe GBE family Controller and diagnostics say that this works normally.

  I don't know what else to check or try to get this connection work.
  Any suggestion would be appreciated.

  Are you using the original operating system that you got with your laptop?
  When you check the NIC in Device Manager is installed and registered properly card?
  When you connect the LAN cable to the LAN port are yellow and light green assets?

• Available only via an ethernet cable connection

  New home, new line telephone (Virginmedia), new router - can connect via ethernet cable but not wireless... Diagnostics of Dell wireless WLAN card utility connections test returns 'internet ping IP = a failed' with the info box indicating "the router/AP wireless for your network works, but your computer is not able to use an IP address to connect to the Internet. You will not be able to connect to the Internet, although you might be able to connect to your local network. Contact your network administrator or the installer of the router/access point wireless to help"

  Hi Doug,.

  Follow the steps in the link given below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  If the steps above does not help then I suggest you to contact the manufacturer of the router in order to configure the router.

• Pavilion internet lost HP while being connected to the software upgrade usb3 and motherboard

  My desktop HPE H8 computer - 1280t lost Internet using USB3 and vice versa.  If I disconnect the external drives connected to the USB3 ports then I have Internet back.  If I connect external drives to USB3 ports, then I won't have Internet.

  What is the latest version of the upgrade of the software of the motherboard of desktop HPE H8 - 1280t and how I get it.

  The computer in question is running on Windows OS 8.1 for several months and no other software added recently.

  Problem has been resolved.  Because of several power is needed for 3.0 external drives to work, I replaced the power supply HP 400 watts with a power of 750 Watts.  Now, I have all external hard drives of 3.0 and Internet works perfectly.

• How properly I fill my wifi to ethernet cable connected to my Xbox

  OK, I have wireless internet in my house but I don't have the adapter wireless for the Xbox 360. I watched a lot of youtube videos on how to implement a bridge so I can get on the Xbox live using my laptop. Basically, what I do is go in the network and sharing Center, and then on the left side of the screen, I hit 'Manage network connections'.  I select the 'connection to the local network' (my ethernet cord that goes to my Xbox) and the "wireless network connection" and I right click and "bridge connections" it then creates the bridge. My Xbox is unfortunately still not able to connect the internet. When I type status it sews the 'connection to the Local network' is not receive data. Any help?

  Hello
   
  I suggest you try the steps from the article below and check if it helps.
  
  http://support.Microsoft.com/kb/978618
   

• stretching from the internet connection via a wired ethernet cable

  Hello

  First time poster. I have a netgear R8000 Nighthawk on my 2nd floor. I intend to use an ethernet cable connected to the R8000 and bring it downstairs in my living room. My question is, is - it possible to be able to connect the ethernet cable in the living room to another router and then connect up to 3 devices (apple computer, smart tv, tv) via ethernet cables? I prefer wired connections. I am aware that I can use as the EX7000 netgear router as access point, but other devices may only be connected wirelessly.

  Any help would be appreciated

  Thank you very much!

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• Using an Airport Express to listen to music - ethernet cable or not?

  My wife - who bought me an Airport Express 802.11n Wi - Fi for Christmas - was reassured in a certified store to which he would have a wireless connection to my existing wifi to stream spotify on my stereo, but I could not set up like that. According to Apple's Support, the Airport Express must be connected to a modem via an ethernet cable to work, which totally contradicts the advice she was given. This will not work for me - the stereo is in a completely different room for the modem.

  Who is right?

  I can't find clear indications on the web.

  Thank you very much.

  A "modem" , it's just that... a device that connects to the service of your Internet service provider to another router with a wireless Ethernet cable. "modem" does not any signal wireless... only an Ethernet signal.

  A ' modem/router ' or the 'bridge' is a device that combines the functions of a modem and router wireless in one package. It provides a signal of wireless network for other wireless devices can connect to the Internet wirelessly.  The modem/router or gateway also provides several Ethernet ports... usually 3 or 4... for devices to connect in this way as an option.

  An AirPort Express can only connect to a modem using a wired Ethernet cable connection.

  An AirPort Express can connect to a modem/router or Gateway using either a wired Ethernet connection or a wireless connection.

  Who is right?

  It all depends on if you have a modem... .or you have a modem/router, also called a gateway.

  If you do not know what you... then post back with the number of brand and model of the device that you call your modem... and we will try to find what it is you have.

• LAN is not recognizing my Ethernet cable

  Hey everyone, I have problems with my Local network setting on my computer recognizing that there is an ethernet cable connected.

  I run a Toshiba Satellite A210 with Windows Vista and a D-Link Wireless G router.  The router is not the issue, because I ran each diagnosis than i've got, and I have a tough line of work running on another computer.  The ethernet cable I use is too new out of the box.

  When I plug my ethernet cable into the laptop, nothing lights up and it does not recognize it existing.  The pilot, he points to what is a Realtek PCIe FE Family Controller and not its own driver ethernet.  Is there a generic driver I can install that will recognize my ethernet port?  Help!

  Hello

  The WiFi configuration runs on the router and the computer? Have you checked for a firmware
  Update for the router? You have to check the router on other computers? Have you checked the
  computer on all other routers? Tried another cable?

  The material could be at fault. If nothing works, you can disable the NETWORK interface integrated into the BIOS
  and/or the Manager of devices and use an out board NIC USB is not that expensive.

  --------------------------------------------------------------------------------------------------------------

  Try these methods:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ==============================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• My Pavilion does not recognize my ethernet cable

  I have a desktop HP Pavilion Slimline s5623w with Windows 7 64 - bit o/s.  This computer connects to the network via a Belkin 54g router that connected to the Internet by cable.  All of a sudden I can't access to the Internet (cable) and get a message that I need to connect the Ethernet cable.  The cable is connected and the LED will Flash next to the Jack at the back of the computer ethernet.  I even tried to connect directly to the reception by cable without success.  I have connected to my Belkin Wireless with a new cable, still nothing.

  Anyone have any suggestions, short he shooting?

  Hello james9285,

  You can also check out the link below on the Site of Hp Support:

  http://WWW8.HP.com/us/en/support-topics/network-Internet-support/cant-connect-Internet.html

  Here are a few basic things that you should check if you get flashing link lights what activity see the:

  1.) check that you have found an IP address after you have connected the ethernet cable:

  (Enter the command line and run ipconfig)

  2.) while in the command ping 127.0.0.1 loopback line

  (This will verify that your card is able to communicate)

  3.) check that the driver does not work correctly:
  (Right click "Computer", click on manage and check on the network tab, if you see the driver Ethernet)

  If the wireless connects successfully as directed by your computer to perform the following acts:

  1.) Ping a site command line:

  (Enter the command line and ping google.com)

  If these steps are followed and you managed a communication & there is no problem of driver, that contacts your ISP (Internet Service Provider) and they will be able to provide support remotely.

  (Please contact me if you have more questions, I'm not an employee of HP, but I am willing to help!)

  {- Please click on the star of 'White Kudos' to say thank you for helping.
  Please click on 'Accept as Solution' if my help has solved your problem. ----------]

  Ezekiel Henson

• Router not connecting wireless pc whenever I was connected before with Ethernet cable...

  I have a laptop with Win Vista (Hp Pavilion), and I always have to connect to my wireless router (Thomson). Until now, I had a problem, especially with the bad weather a few times and I thought is about the quality of line.

  In general it wasn't working properly, I mean the connection. A few weeks now that I have another Laptop (mac) connect to the network, but always with a ethernet cable, I realized, then when I tried to connect via WiFi HP laptop, once again, is it just doesnot work... I almost every time to reset the router, to establish the wireless connection. No matter if the computer mac laptop is connected or not if a cable, I have no connection to the network, and I have reset the router. Subsequently, all right. Someone knows a possible reason? Thnx in advance...

  Hello

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results once you try the steps above.

• I work tech support for an ISP broadband. Get a certain calls lately from connectivity lost on cable connections.

  original title: Refresh TCP\IP Winsock

  Hi all

  I work tech support for an ISP broadband.  Get a certain calls lately from connectivity lost on cable connections (coax to modem, ethernet to the computer).  It seems that some of my old Dos standard TCP\IP troubleshooting commands are outdated.  Could someone please review and criticize the following sequence for accuracy?

  1. START | RESEARCH | ORDER -RUN as ADMINISTRATOR
  2. IPCONFIG/FLUSHDNS
  3. NBTSTAT-R
  4. NBTSTAT - RR
  5. NETSH INT REINITIALIS
  6. NETSH INT IP RESET ... Not
  7. NETSH WINSOCK RESET ... Yes

  Thank you!

  J. William (Bill) Hamill Esse quam videri

  WinSock and TCP/IP update.

  Win 7.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Win XP & Vista

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to connect an external device via an Ethernet cable with iPad Air?

  I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

  LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

  You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications