Pavilion 500-054: hp pavilion 500-054 problems with the connection to monitor

Similar Questions

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• Pavilion 15-n234sl: problem with the installation of the driver WIFI RTL8188EE

  Hello world.

  I encounter some problem with my wireless card since the new driver is available via windows update.

  The installation seems to be ok, but after that the card no longer works.

  The key of the keyboard wifi light. lit red guard if it is set to the aero mode.

  The card works fine in rolling back to a previous system configuration, it goes back to work, until the new driver is installed again.

  Any who have experienced the same problem or does anyone have a solution?

  Can someone tell me the other compatible wifi cards in case of substitution?

  Thank you very much and sorry if my English is not perfect!

  Ste

  Hello:

  Please read my recommendation about what to do on the link below...

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-RTL8723BE-update-fails-cuts-off-WiFi/m-p/5275224#M102368

• I have a problem with the connection to the computer after you forget the administrator password.

  Original title: Windows administrator password

  I forgot my password for windows 7 on a HP Pavilion laptop. I use the fingerprint reader to log on now (Administrator). I do not have the password reset disk also. What should I do to reset the password?

  Thank you...

  
  

  Here you go:

  1. Start the computer with your CD to repair Windows.
  2. Select "Repair Mode".
  3. To set Windows to a point before you changed the password, use "System Restore".
  4. Sign in with your old password.
  5. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

  It is available, you have an installation CD or created a CD to repair.

• Problem with the connectivity

  I bought a Motorola Atrix 2 last year. My ISP is cell idea. I am a subscriber of Pune in India.

  I am facing a strange problem. When I go to Mumbai, I lose coverage and am still not able to choose a network operator. It comes on despite being on the National Roaming. Surprisingly, I get coverage roaming everywhere-New Delhi, Kolkata, Darjeeling etc. and not had any problems, he. I went to Mumbai 5 times until now after buying this phone and each time, it did not work.

  When he did not work for the first time, I thought it's maybe because I have an old SIM card (which I had), so I changed that to a 32-bit SIM. I also went and complained to the office of idea cellular and told them that I could not get roaming in Mumbai. They have checked my account and was told that my "National Roaming" was THERE and they are still based setting once more. They assured me that it should work.

  After each trip, I complained of idea and they said that the problem is not with their service. The last time I tried one thing - I removed my SIM card and inserted Vodafone SIM in it and who is not working too. However, my SIM when it is inserted into another phone in Mumbai, has started working.

  So, now I know definitely that the problem is with the phone.

  Strangely, as I said earlier, it seems to work everywhere else (or at least certainly working at New Delhi, Kolkata and Darjeeling).

  Can you suggest what I should do about it? The phone is under warranty.

  Kind regards

  Arun

  Hello Bro,

  I had a similar problem with my Motorola Atrix 2, which was purchased on January 4, 2013. Vodafone SIM is been recognized and had a red cross on the notification of signal. But the same works very well in the other mobile. Also use the SIM showed all the signal bars.

  Resolution: update number to ICS sound available that solves the problem of vodafone, but new is the difficulty to connect to the wireless network.

  Amit

• Problem with the connection to USB6008 OR LabWindows

  Hello world

  I make a program in LabWindows and so far, I've had two instruments running without any problem. But I try to add a USB6008 OR the program. I downloaded something called "NIDAQmxBase" and has added a file called "NIDAQmxBase.h" but I can´t find the file ".fp" and so I have no function to communicate with the instrument.

  Can someone help me?

  The 6008 can definitely use DAQmx.

  Without worrying about the chouce on the daqmx package to install, you must install it AFTER the CVI has been installed, and in the installation process, you specify to install support for this development environment.

  After that, you should see daq function in the menu of the library (if the corresponding item is gray, go to library > customize, mark the check box, press OK and restart CVI to see the menu filled with the functions of data acquisition).