Pavilion 500-339 usb 3 does not

Similar Questions

• Qosmio X 500-149 - USB, eSATA does not

  Hello

  I was wondering if anyone can help/advise on that...

  I had an X 500-149 for several years now. First gen Intel i7/8 GB of RAM. Never made any change of harware. Updated the operating system to win 10 months ago. A few days back, ports USB and eSATA/USB stop working. Now whenever I plug a USB device, the led of the unit flashes (Flash regular, rather than flashing irregular during the reading of the device), but the laptop does not recognize the device or display anything on the menu. I've been on the UK home page for my laptop model, but the USB driver only I could find was for the utility "sleep and Charge".

  BD of the laptop's optical drive works fine. The rest of the laptop seems to work normally.

  Have you tried to close windows and start cold?
  The USB controller may just need reset.

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.

• HP Pavilion G6-2231TX: usb ports does not completely

  My usb ports are not working properly.whenever I insert each drive was not recognized by the system

  Hi friends,

  Please check with any other pen drive, if still does not work

  then follow the step

  step 1:

  Make the default bios

  step - 2

  update the driver below.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59647.exe

• Pavilion dv7-7071sf: USB port does not

  Hello!

  First of all, I apologize for my poor English, hope that you carry a grudge on me on this subject.

  I accidentally deleted the bios battery connector yesterday while I was remove my computer (cleaning with dry of butane air blower and replace thermal paste), so the bios reset...

  After that, the USB ports on the right were not functioning more, IE. they always provide the power for any USB device that them are attached (tried with fan, external hard drive and mouse), but does nothing else (mouse not working not, disk appears not, no sound windows indicating a device has been connected...).

  Here is a list of the things that I tried to fix it:

  • Disassembled my computer again to check if I have everything connected correctly
  • Removed the battery and the cable and held the power button for more than 1 minute and a half
  • Update the drivers (Intel Download Center expandable 3 USB host controller driver)
  • Removal of windows drivers to install its generic those
  • Restore my computer at the time when I had everything working well.

  None of these manipulations worked, and the right usb ports (two usb 3.0) were still not functioning while those on the left (usb 2.0 and usb 3.0) were.

  I assumed it was a matter of windows, so I tried to format my hard drive, using the tool of recovery (F11).

  As for now, complete recovery, windows is installed, but all ports (left and right) are no longer.

  They still offer a power of my devices, but won't fire any action of windows.

  I'm in the show right now the updates of windows, but I don't really expect a lot from him.

  How can that being said, I solve this problem?

  I would appreciate your help on this,

  Thanks in advance.

  HP Pavilion dv7-7071sf (almost 3 years years).

  Using 64-bit windows 7 OS.

  Disk used: Western Digital USB 3.0 compatible with USB 2.0.

  Used the mouse: the mouse Bioxar.net & Steelseries (call of duty Black Ops II)

  Hey once again!

  Thanks again for your help freedomwarf (and all those who have spent the time to read this topic), the problem has been resolved.

  A friend told me to make a CMOS clear, which I planned to do, but I have not found the mutator.

  What I found instead was me forgetting to plug in the data cable to the motherboard (only the power of one was linked in).

  Thanks again for your help!

• Pavilion 17-g113dx: USB hub does not work on Pavilion 17-g113dx after intallation of win 7

  Hi, I have a 17-g113dx Pavilion, which was originally to gain 10 on it, but I'm frustrated with it and installed win 7.  After the driver installation failed for the USB hub.  Is there a driver that is compatible with this machine and the operating system that I can download?  The hardware ID are listed below.  I have several other questions, but it is the largest.  Thank you.

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8094103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Hello:

  For the first unit, download and install the 2nd driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  For the 2nd device, install you the driver of USB3 has not ended.

  See if it works.  Download and unzip the driver Intel USB3 lasvegaswireman posted.  Do not run it.

  Go to Device Manager and click on the USB hub root of problem.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the Intel USB driver you have unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

  The third device... you run the patch from the link below to activate the TPM on W7 2.0 device.

  https://support.Microsoft.com/en-us/KB/2920188

• Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

  Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

  Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

  Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.

• Pavilion dv7: 2 usb port does not

  Hi, two of my three usb ports don't work or devices recoginse (both right), but the one on the left recognizes all the devices, I plug.  How can I get the two on the right side works correctly?

  Concerning

  Hello

  are a 4 USB 2.0 ports.

  • 4 USB 2.0 ports (4th port shared with eSATA)
  • 1 eSATA + USB port (left port)

  HP Pavilion dv7-4131sa Entertainment Notebook PC product specifications | HP® Support

  The difference is that the ports on the left are integrated on the motherboard, rights USBports are a card with a cable that can be replaced in case of failure.

  If you have a distribution of Linux (Ubuntu, Mint...)  You can use it in live mode (without installation) to test the USB ports

  Manual (page 80-81)

  http://h10032.www1.HP.com/CTG/manual/c02642701

  related topic

  HP PC - troubleshooting connections USB (Windows 7) | HP® Support

  

• Pavilion 15-b129wm: USB recovery does not

  I followed the instructions that came with the recovery media, he asked for a few minutes, then the screen went black for several hours. The support hotline kept breaking and I can't find a solution.

  Thank you for this!

  If you get hard disk short DST a fails, which indicates the drive is defective and you probably need to look at the possible replacement options. I suggest you contact our telephone support about this information. Please follow this link http://support.hp.com/us-en/contact-hp enter your product number, select your product, scroll down and fill out the form. Will then give you a case number and a phone number / reference to give the agent who answers your phone call.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.
  Have a nice day

• Pavilion 500 series: Windows 10 does not recognize my HP Envy 5532 as a scanner

  Since upgradingg to Windows 10 my printer works, but I can't get the function of scan to post a link to the PC, can you provide any help with this.

  Sometimes I have the same printer. I fell on the same subject. The new driver, which is available at Hp seems to have solved the problem I had.  Here's what I just did.

  (1) uninstall the printer from the printers and devices.

  (2) download the following driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5500-e-all-in-one-printer-series/5304881/model/5304882#Z7_3054ICK0KGTE30AQO5O3KA30R1

  3) double-click the downloaded installation file.

  (4) follow the prompts.  I chose a wireless installation.

  Once it is finished, you can type in scan in the search window. Choose and click Windows Fax and scan.

  Once you select the printer such as requested by the installation software as seen in the image, click Next.

  

  

  

  Use the HP Print Wizard to manage scanning. He wil have been installed by the HP printer installation software. Use the search box in Winfdows 10 to find or use the apps icon everything.

  

• Pavilion 500-339: update video card for a 500-339 Pavilion

  I have a HP Pavilion 500-339. AMD A10, processor 3.5 GHz quad-core with 8 GB of RAM, running windows 8.1, 64-bit. It came with a Radeon R7 240 video card. I know that physical space is limited inside the computer case, but what could I upgrade to that would fit? While not the biggest PC-gamer out there, I do not play a bit and I would like the best features. Thank you!

  Hello

  Without replacing the power supply, the NVIDIA GTX 750 TI would be an excellent choice. Choose a model that does not require a 6-pin auxiliary power connector.  Open your Pc and do some measures so that you know for sure that the GTX model 750 will be fit. Most should adapt to certain expectations.  Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Pavilion 500-339: improvement of power supply for a 500-339 Pavilion

  I posted yesterday on you want to upgrade the video card in my Pavilion 500-339. Now I see that my PC has a power supply 300W and higher end video cards require a 400W or more so I think the upgrade from my diet too. I know that HP is sometimes require specific types of equipment, so I really hope someone can direct me to a 450W or greater POWER supply... I'm looking on the internet and I see some specs I'm not familiar with that. Help? Thank you!!

  Hello

  The standard ATX HP power is 5.9 by 3.4 by 5.5.

  The Corsair CX500, CX600, or CS650m to adjust the dimensions above.

  Thanks for posting on the forum.

• Pavilion 500-339: update video card for a 500-339 Pavilion... room with Ram?

  I posted a message here a few days ago because I wanted to find a possible upgrade for my graphics card. I have a Pavilion 500-339, 3.5 GHz with 8g of RAM. The video card is a Radeo R7 240 and I want to upgrade. Big_Dave said (thanks for that!) but I am facing another problem. The motherboard is good, but compact and I fear that new video card (because it is longer) pretty much sitting on top the RAM (if it fits in all). I know that my computer is not a "PC game", but would that be a problem? One more time card would still hold? What choices do I have? Thank you

  Hello

  Aries won't present a problem of heat for the graphics card.

  Thanks for posting on the forum.

• Pavilion 500-339: steps for production switching in a pavilion of 500-339

  I just ordered a new card of video for my Pavilion 500-339 (with a more powerful power supply) and I think I read somewhere that I need to disable the "secureboot" and "Legacy", or else my computer can now load Windows after the installation of the card. Is this something I need to do while the old card is in or I have to wait until the material is under tension? I'll need to return to a step by step guide for it...

  Try it with active secure boot and see if your PC boot ups. If Yes, then no changes are necessary. Otherwise, you will need to swap the card with the old card and then boot into the BIOS and disable secure boot.  It depends on the security level of BIOS in your PC.  HP has added more updates of security to the BIOS that can strengthen the restrictions on the physical changes.  Changes to the BIOS of the security details are not publicly documented or disclosed.