Pavilion 550-151na: the PSU and GPU upgrade for my 550-151na?

Similar Questions

• The x 51 PSU and GPU upgrade?

  Hello

  I just bought the x 51 (http://www.amazon.com/Alienware-AX51R2-5726BK-X51AX51R2-5726BK-Gaming-Desktop/dp/B00FE8MJSO/ref=sr_1_1?ie=UTF8&qid=1404271057&sr=8-1&keywords=x51). I was a little disappointed by the performance (running watch dogs on smaller settings and still getting lag problems). I'm looking to upgrade to the R9 270 x, but external power skinny 240 watts does not seem to be up to the task.

  I found a post on this topic here: http://en.community.dell.com/owners-club/alienware/f/3746/t/19579742.aspx but do not see anything specific on the upgrade of the PSU. I also wanted to check that my X 51 will be compatible with the R9 x 270.

  How can I upgrade the PSU, and where can I get the right replacement?

  Thanks for the help!

  Edit:

  Yes, the R9 270 X is the fastest videocard supported for this model. However, the video card from this link does not have the X 51 R2.

  Supported in the X 51 R2 larger dimensions are 9.5 "length, height 4,376". The dimensions of this video according to Amazon card are:

  Product dimensions: 10.2 x 5.1 x 1.5 inches

  Note: The adapter from 330W should be enough for the 270 R9 or R9 270 X.

• Upgrading the PSU and GPU for my HP Pavilion Elite HPE-510 t

  Operaring system: Windows 7 64-bit

  CPU: Core i5-2500, 3.3 GHz

  Memory: 10 GB

  Video graphics card: GeForce GT 420 - OEM

  Hard drive: 1 TB

  Computer case: height: 38 cm (14.96 inches), width: 17 cm (6.69 inches), length: 41 cm (16,14 inches)

  Power supply: power supply 300W

  Several features of the product: HP Pavilion Elite HPE-510 t

  due to the diablo 3. I updated graphic setting the lowest. FPS is between 15-22 so I'm interested in upgrading my power supply HP Pavilion Elite HPE - 510 t(specs are above) and graphics card with the following, respectively:

  GPU: ASUS GeForce GTX 560 (Fermi) 1 GB 256-bit GDDR5

  GPU size: 9 "x 4.4"

  Power supply: Antec High Current Gamer HCG-750 750W Series

  "Power supply Dimensions: 7.1"x 5.9"x 3.4"

  I wonder if these prodcuts will enter the computer, as is or if I should look for other products.

  Thank you

  The ASUS GTX 560 should adapt and work very well. The Antec PSU is great and very likely to have problems in the space provided. It can interfere with connections to the motherboard and push against the CD/DVD discs. Please look at the Corsair CX600 instead. It is only slightly larger than the block of power SUPPLY HP stock and is known to adapt.

  Frank

• After replacing the PSU and GPU in my HP Pavilion desktop computer, the wifi stopped working.

  I'm upgrading my pc, I plug a new PSU and video card.

  After successfully, I replaced and installed, I booted up my PC, but it showed that none of the networks or wifi connections are available.

  I read that maybe it's something to do with the antenni?, I noticed something that looked like antenni tangeled upward in the power supply cables, I did not use them. but I have no idea what could be the problem.

  Thank you for the information, @henry321.

  Yes, I suggest to leave the side panel on the computer and then move the led in the case and look at the signal.  You may need to route through an opening in the case is outside of the case.  I think I read that it is the best way to get a good signal.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• XPS 400 PSU and GPU upgrades

  I have a xps 400 and I want to update my NVIDIA GeForce 7900 GS to the Radeon HD 7850 2 GB graphics card. The current supply is 375 watt and I need at least 500 watts to run. Is there a powersupply upgrades for my system?

  http://www.TomsHardware.com/reviews/gaming-graphics-card-review, 3107 - 4.html

  All latest versions of PCIe x 16 are supposed to be retro-compatible with all older versions.  While 2.0, 2.1 or 3.0 it should work.  It has also been shown that there is no significant loss of performance, put a card 3.0 on an old motherboard with an earlier version, when it comes to games.  After what you just said about a future update, go with the HD SA 7750.

• This PSU and GPU will work with my dell inspiron 660?

  Hello

  I got my dell inspiron 660 earlier (2 years ago) and was thinking of upgrading the PSU and GPU (I'm not a big PC gamer so cheap products, I chose will be much used) anyone of you could tell me if it would be compatible with my inspiron and between them. And if not could you tell me some compatible CPU and GPU, my spending limit is £90.

  GPU - Asus GeForce GT 610

  PSU - power supply 600W Sumvision power X 3

  Thanks in advance,

  I think that the 660 has a 300W power supply.  What is the Min requirements for the GT 610?  I think you could slamming in there without having to upgrade the power supply at all.

• m9500y GPU upgrade for Battlefield 3

  Hi, I'm ready to update my card for a new card as my card was recalled for a while and I never had the time to replace because I was too late for the reminder. Anyway I think to update my card so that I can either game BF3 on high or same environment setting I know I have to change the PSU, but I have never an upgrade on a gpu in my life. I was wondering if this card can work XFX HD - 6770 but I don't know what that food to get and I don't know if the power supply will go into my case

  COM

  RES 1600 x 900

  Budget $ 250

  and I'm going to need a new drive HARD because when I boot on my screen, I get "disk failure hard Samsung HD753LJ is imminent. Please back up your hard drive and get it replaced! »

  Hello

  You might want to consider requirements for Battlefield 3.

  The minimum power for video cards AMD is 400 watts and the power supply of your PC is only 350 watts.  You need to upgrade the PSU.

  As for a map video, I recommend the AMD Radeon 6850. It's $130 after rebate. You shouldn't have any problems ranging from medium to high heat with a screen resolution of 1600 by 900. PSU Corsair CX500 is adequate for the AMD Radeon 6850.  It is $40 after rebate.

  These "how-to" HP articles should be helpful with the physical facilities.

  Oh, for the replacement of your hard drive, this Western Digital 750 GB 3.5 "Sata hard drive $ 70 is an excellent price.

• Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod.

  Adobe first Elements 13 do not interpret the film and properties correctly for widescreen is a mod. This has been brought to the attention of Adobe in December of 2014 by others. If you import a footage in Adobe Premiere elements 11 or 12, you can eliminate the black bars on the sides by setting predefined settings correctly and using properties and interpreting the film. Not the same with 13 elements. What has been done to correct the problem? How users can be compensated for the purchase of a program or upgrade to a program that has a fault serious?

  Please notify.

  fran3

  What you report a known problem with elements 13/13.1 first I wrote about back in December 2014, and whenever the subject came up in the Adobe Premiere elements Forum.

  First Elements ATR troubleshooting: EP: 13 serious problem with. MOD Widescreen files

  I have not seen Adobe personal or PRE_help this issue whenever it appears in one of the threads here. The frequency of appearance of personal Adobe or PRE_help is not defined. It's a call from Adobe on ignore or fix in the next version or other.

  This isn't Adobe. Instead a user. You need to contact Adobe to know the why of the situation and what his plans are to remedy the situation in order to allow the usual workaround if this is a solution that will make unnecessary workaround.

  You have a chance by converting the widescreen is a mod to another format that would recognize the flag of 16:9 wide screen of is a mod, if 16:9 is really there.

  RTA

  Add on... Consider

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

• Normally, when I log on my Mac, I have a log in and then I have my counter top.  I suddenly tonight, another newspaper in the window, and it asks for a password, I didn't create, so cannot go beyond that window.  Anyone know what it is?

  Normally, when I log on my Mac, I have a log in and then I have my counter top.  I suddenly tonight, another newspaper in the window, and it asks for a password, I didn't create, so cannot go beyond that window.  Anyone know what it is?

  This window appears before or after the usual? What is it exactly?

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• the cupw and or pop3 for outlook in outlook express account. Info, or even where to find them

  victory settin up an otl ex? We ask: what is your pop3 and cupw, sumthin like that.  HAV an otl how to find or what are the t answers?

  Hello

  Welcome to the Microsoft community.

  I'm happy to help you with your concern.

  I understand that you ask for the POP and SMTP settings for Outlook.com account for you to be able to set it up in Outlook Express.

  Please apply the following settings:

  Incoming (POP3) Server

  • Address of the server: pop3.live.com

  • Port: 995

  • SSL encryption: Yes

  Outgoing (SMTP) Server

  • Address of the server: smtp.live.com

  • Port: 25 (or 587 if 25 is blocked)

  • Authentication: Yes

  • TLS or SSL Secure encrypted connection: Yes

  Thank you.

• I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else).

  Hi all.

  I just installed windows XP Pro on one of my computers. Now when installing, it showed me the main partition C and another extended partition (which was very small). Now windows gave me the option to install Windows on the C partition and it me has failed to use the extended partition, he said is reserved for windows. Now my problem is that it does give me an option to create a new partition (except on the extended unallowed was D). I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else). I want only the OS on C. How do I do that? The PC has a single 79GB hard drive

  Hi DextrousDave,

  Refer to the article below to learn more about partitioning during the installation of Windows XP.

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• What is the incoming and outgoing POP3 for AOL?

  What is the incoming and outgoing POP3 for aol?

  Hello

  the servers are:

  for POP3 - pop.aol.com

  for SMTP - smtp.aol.com

  But you need to change the port number in 587 for SMTP .

  You can see here - how to configure Outlook 2002 and Outlook 2003 for SMTP and POP3: click here

  (the last photo is important - you need to check - this server requires an encrypted connection SSL - SMTP and POP3 too)

  LC

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo