Pavilion 6643 Start Up.

Similar Questions

• HP Pavilion dv6 starts request at startup startup normally or repair problem

  Hello, HP Pavilion dv6 starts to start normally or Startup Repair request. Results of normal boot BSOD too fast to read.

  Startup Repair in execution, but 13 hours still not repaired. What should I do? My computer knowledge is poor in good conditions, but I'm at the point of turning into an expensive Frisbee. The fact that I have to use this UM netbook that will soon be a Frisbee is driving me crazy!

  It's a venerable laptop purchased Feb 2010. It is a Pavilion DV6 (model DV6-2005-TX) running windows 7 Home premium (32 bit) and updates only did a request from Microsoft, so are a lot of patches and fixed security.

  Help will be very humbly and grovellingly welcome.

  Hello

  The error code is different from the first, it is still a short drive self test failed and confirms that the drive must be replaced.

  A brief overview of how to replace the hard drive is detailed below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion unable start G6

  Hello, I own a Pavilion G6 2288-ca. Last night, brought my computer in a public area, then someone the reversed and he landed on a soft carpet, but now when I turned it on, it didn't work, can you please help me? I'm stuck on the boot screen

  Hello

  First of all, if the data on the disc are very important, by far your best chance to recover is to solicit the services of a company that specializes in data recovery, but it is a fairly expensive road.

  Other possible options are the following.

  1. A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. Note: you'll need Devil Secure Boot and allow devices inherited into your menu of the bios to boot from the disc.
     

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  1. Another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  **********************************************************************************************

  Regarding replacement HARD drive damaged, an example of what you need are visible on the following link.

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 52 of your & Maintenance Guide.

  ***********************************************************************************************

  To reinstall Windows 8 on your laptop, here are a few options.

  1. You can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Support of order recovery HP.

  1. Download the file to Image of Windows 8 on the following link - Note that this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  If you need a utility to create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  The product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Other software and drivers you need can be found here.

  Kind regards

  DP - K

• Pavilion DV7 start error message - unable to start BTVSTACK. EXE, BTBIP. Missing DLL

  I have a Pavilion Dv7 (A3F83AV) running windows 7, 64 bit and recently to get the error message at startup telling BTVSTACK. EXE cannot start as long as BTBIP. DLL is missing.  I found that this has to do with the bluetooth, but I'm not sure which is better to corect this issue. Any ideas how to solve this problem?

  Thank you

  Hello:

  I want to try and reinstall the bluetooth driver and software for the wireless card model that your laptop uses the support page and the driver of your laptop.

  If it's an old dv7 notebook that has the HP bluetooth separate module, then install the HP software for your laptop. support and driver page of s.

• HP pavilion dv4: starting HP pavilion dv4

  My HP pavilion dv4 won't start. The battery is dead for a long time and I unplugged without any problems in the near future. But today my laptop won't suddenly start little matter what I do. I tried the 25 - 30 sec current drain thing but still nothing.

  I should also mention that the plug shows signs of decomposition while the battery is dead. The lights on the desktop Flash for a second or two and then nothing. I searched the forum to find answers, but still nothing found. Please answer as soon as POSSIBLE!

  It sounds as if it was the time to get a different notebook to replace the one that has the problem.

• HP pavilion 1410n starts and questions of fan pls help

  Hi everyone im new and here I need help with my HP Pavilion 1410n. Ive had my office stored for like a year since I have a laptop I don't use any, yesterday, I decided to take it to find some of the files I needed, but when I turned it on it does not start at all, and all this I can hear is the fan connected to the motherboard running non-stop and does not show me anything in the monitor.ive never had this kind of problem before Ive had for about 6-7 years ago until now since I bought it thanks in advance

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button

  Please post here your positives or negatives in your thread.

• Pavilion p6214y starts... less than one year old

  I have a Pavilion p6214y that I bought last November.  I recently bought a Wireless N network card D-Link PCI Express desktop computer and installed.  I managed to do it start and run perfectly, shortly after installation.  Suddenly, the monitor became all white and the computer was completely inadmissible.  I held the power button to turn off so I could reboot.  When I tried to reboot, the fans and lights that all will turn on, but there is nothing on the monitor.  This will be repeated for a few seconds (maybe 20 or more) and then closed for about 5 seconds and repeat.  I cannot even hold down the power button as he tries to restart to turn it off and must resort to unplug for a few seconds that it is inactive.  I checked on the motherboard and other components and see no signs of Burnout.  There was a little dust on the inside, so I carefully cleaned it as best I could.  I'm at a total loss for what is the problem.  Any help would be greatly appreciated!

  Your PC must be covered by the warranty.  It's time to contact the HP Support,

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Pavilion dv7 starts

  My product is a pavilion dv7-4171

  product #XH108UA

  series #[personal information deleted]

  I read the support documents and tried the hard reset twice.  Unplugged the machine and took off the battery.

  The fan turns on and stays on; the caps lock led flashes blue. the power button is blue.

  I don't have a monitor to test the screen/graphics card, but I don't think that's the problem.  I HEAR the hard drive being accessible if the computer was actually start the system, right?

  I also tried 'Testing for hardware failure' but that no longer works.

  Any suggestions most appreciated!

  Laurie

  Really sorry to hear about problems Laurie. Here is the table of the blinking codes to compare with your laptop:

  http://support.HP.com/us-en/document/c01443366

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• G7-1070us Pavilion: laptop starts but the screen is intermittent

  laptop starts up ok and the display is available on the external monitor or a hdmi to the tv. turn top display backlight lights up but the screen is blank.

  Hello:
  
  Yes, it was what I thought. I do not understand how the same pilot worked as a temporary solution.
  
  Decide for yourself after you have identified the cause of the problem. If it's just a matter of cable, I think it's worth repair. Otherwise, I have no idea, maybe it'd cost you big.
  
  Give it to get it repaired in a good local computer shop.
  
  Concerning
  
  Visruth

• HP Pavilion 6510: Start Menu Shut Down tab always indicates that the updates are available

  The Shut Down on the start menu tab always indicates that there ae updates available.  This persists even after manually searching for and downloading updates.

  Then Microsoft Fixit has been executed, the computer has restarted, and 5 updates have been installed.  But the start menu still indicates that there are updates available.

  This could be the cause?

  How this should be dealt with?

  Is there some updates that aren't installed properly, and if so this could affect the security of the computer?

  Hello

  Go here and download "never 10.

  Run the program. It will turn off the Win 10 forced update.

  Jay

• HP Pavilion a1730n starting problems

  I have Vista, I bought my computer two years ago (February 2007).  My computer does not start successfully upward.  My son bought an external hard drive, and apparently he was asked, "do you want to overwrite the boot sector?" he said yes.  It has also installed Linux on his external hard drive, because he wanted to use Linux everywhere where it can take his hard drive.  After the transfer of the data, he pulled his drive and turn off the computer.  When we tried to turn on the computer (without its hard drive is plugged in), what the computer could do on its own give us a text message BACK saying:
  
  Windows did not start because of a configuration of the disk of the computer problem.
  Could not read from the selected boot disk. Check the hardware path and startup disk.
  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  
  I tried to plug his drive external back in and restart.  The mistake of text BACK we got was:
  
  Windows could not start because the following file is missing or damaged.
  Windows root\system32\hal.dll.
  
  I rebooted, you press ESC to get to the boot menu and tried to boot directly from the external hard drive.  It did not work.  I used a Linux disk, my son had and was able to start with it and see my files.  We have registered important files on the external hard drive to my son.  I put in my recovery disc and tried (to disk and then from the hard drive) repair the hard drive.  He told me that he could not fix it (twice).  I tried to use the restore disc to go back to a restore point.  He told me that there is no restore point.  I also tried selecting "last good Configuration known (your most recent settings that work)" in the Options Menu advanced (repeatedly pressing F8 at startup to get this menu).  It also did not work.  When I ran my program of recovery from my hard drive, I could choose HP Recovery or Vista Home Premium (recovered).  I chose HP Recovery to repair and restore attempts.  After these failures, I chose Vista Home Premium (recovered) and my computer was able to load my desktop, settings, and files successfully.  To start and use my computer as I always have, I have to use my recovery disc and go to the back door (so to speak).  I think I need to restore the master boot record, but nothing seems to be me getting there.  I may have to use BCDEdit, but I do not know what commands to enter at the DOS command prompt.  Suggestions?

  Try this .

  Be aware that if your son likes to play with dual-booting, you should probably buy him a pc to play with or you will find yourself in the same situation again.

• HP Pavilion 6330: Start Menu does not start

  I have just upgraded to Windows 10 last week. Everything was fine until tonight. Now, my Start menu does not appear.

  Hi there @srazzle922,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that the Start Menu no longer appears for you a week after the upgrade to Windows 10. I'm happy to help you with this. Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  It worked fine for a week, it is possible that some recent update, led to this parasite. Try a system restore to a point before the problem started if possible. Computers HP - using Microsoft System Restore (Windows, 10, 8)

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP pavilion dv7 starts, which has failed to start test. ID: RK47G1-6AH6LK-9C5V7A-60TP03

  I have the computer hp laptop pavilion dv7 4150er, running on windows 7 64 bit. There no short DST when I ran boot and run in trials with the same ID RK47G1-6AH6LK-9C5V7A-60TP03 with "hard disk 1" in the description. Any ideas what's past? See you soon...

  Hello

  Please check the following:

  http://www.WikiHow.com/recover-a-dead-hard-disk

  Good luck.

• Pavilion: continuous, starting problem

  Hi I bought a computer hp pavilion laptop less than last year, Windows 8. It worked perfectly until 5 days ago. I put it the morning of Friday, March 20. It came as usual with the home screen. However I couldn't cursor th on the documents folder to allow j to reach in my computer (I intended to connect to a Wi - Fi signal). When I couldn't for get the machine that never leave like that before, I decided to drop-down menus.

  I restarted and eventually the screen saying "Windows gets loan do not turn off your computer. It happened like that ALL day. That evening, I pressed the power button and it came out. When I powered up, he stood under the same thing. Let him Friday evening to Sunday evening and he always looked and has remained the same. Today is Wednesday, and there has been no change. I took out the battery today, twice and it powered on and it still showed the loading screen saying Windows is preparing. Please, please help!

  @Cheen7 ,

  Hello again.  Well at this point you have nothing to lose.

  First ring diagnostics from the BIOS for your system.  If it comes with hard disk problems, then replace the hard drive.

  If this isn't the case, perform a full recovery of the system and this will load everything back to the original configuration.

  Laptops HP - diagnostic system (F2)

  PC HP hardware diagnostics

  So, as I said, run diagnostics and if they go up all clear then do the system recovery.

  Performing a recovery of HP (Windows 8) system

  Thanks again for posting and have a great day.