Pavilion 7000: Computer freeze once the fan CPU runs at max speed

Similar Questions

• Satellite A300 - fan always runs at full speed after full stop

  When I stop the Satellite A300, the fan always runs at full speed.

  Hello

  What? Cooling modules run, even in this case, the cell phone is off?
  Press the power button for at least 4 seconds, then the laptop must be turned off.
  Disconnect the power adapter and remove the battery
  Wait about an hour and reconnect the battery and AC adapter
  Then switch on the device after a certain time of use of turning the unit off and check if the cooling modules would stop too

• Pavilion dv6 - how to clean the fan

  HP Pavilion dv6-7029wm

  He did two years since I bought the laptop, and I finally realized that I have to open the computer to clean the fan properly. However, my laptop doesn't have access to the cooling fan Panel - so I tried to take it apart with the help of the manual.

  However, the procedure necessary to reach the fan itself is very long and complicated, as seen here:

  http://h10032.www1.HP.com/CTG/manual/c03582006.PDF

  Is there another way easier to reach the fan? I have to go through this everytime I want to clean the fan?

  Also, I am stuck at the part where the keyboard should be removed. The keyboard is supposed to be difficult to remove? Because when I try to remove it, it seems as if she can bend and break.

  I wish I could post pictures...

  Hello:

  I never take a laptop apart to clean the fan.

  Here's what I do...

  Disconnect the power adapter and remove the battery.

  Find a thin object such as a straight pin in place through the air intake fan and make sure it happens between two of the fan blades to avoid the fan turns.

  Get one of these cans of compressed air to dust and spray it in the fan intake and exhaust fan a few times, I look for dust to move on the vents.

  When I see more dust blowing, I consider the work completed.

  Reconnect the battery and a/c adapter.

• When I start my computer, the Fans are running, but it doesn't dΘmarre

  When I turn on my computer Windows Vista, the Fans continue to operate, but it won't start.  There is no sign indicating that the computer is Hung Up.  My monitor as you sleep and said there is no connection.  The monitor is connected but.  The Maximum waiting time for my computer is about 30 Minutes, but I waited 24 hours and it is still stuck at the Fans.

  Hello

  If you do not get the manufacturer's logo & if the monitor LED goes from green to Orange after a certain time, then it is a hardware error.

  Recently changed the location of your system? You can try reinstalling the RAM. Also, remove the CMOS battery once & check.

  Go back to help.

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• M400 screen/computer crashes and the fan is palpable... reboot is the only option

  Randomly my [Toshiba Portege M400-S5032 | http://reviews.cnet.com/laptops/toshiba-portege-m400-s5032/4505-3121_7-32329282.html] crashes and the fan starts running fast. [Cnt-Alt-Del does not work and the only way out is pressed the power button until there is a shut down | http://forum.notebookreview.com/toshiba/224709-toshiba-u205-lock-up-problem.html#post3454972]. Increases the frequency of this problem as the age of the laptop. I opened the computer to make sure that there is no dust or debris inside and I [removed the stickers from the bottom of the laptop | http://cxliv.org/2008/06/09/toshiba_u205-s5034_lock-up_problem.php] or less perforated holes in the stickers. [Other people have the same problem | http://reviews.cnet.com/laptops/toshiba-portege-m400/4864-3121_7-31729265-7.html?tag=userReviews;summaryList]. Some [think that Frost is caused by movement | http://www.fixya.com/support/t2758501-machine_freezes_up_needs_hard_boot], but [others think that it is only because software | http://laptopforums.toshiba.com/t5/General-Technology/Portege-M400-Problems/td-p/24729].

  * Does anyone have a solution? *

  Hello

  What version of BIOS your M400 installed?

  Test the RAM for problems using the Memtest CD of www.memtest.org

  And update the drivers (fingerprints, display, sound etc...).

• computer freezes at the C:\\WINDOWS\System32\DriverStore\FileRepository\prnep001.inf_f0a9a372\I386\EPNDDE4P. DAT___

  A virus on my computer. Then restore the hard drive with recovery CD. But even computer crashes when you run the full scan.

  When running deep scan Windows Defender/Avast free Av / Malwarebytes programs and any computer freezes when the analysis reaches the following file:

  C:\\WINDOWS\System32\DriverStore\FileRepository\prnep001.inf_f0a9a372\I386\EPNDDE4P. DAT

  What is this file and how can I solve this problem?

  Hi quazi_albany,

  This seems to be a driver file printer Inbox for epson printers.

  Method 1:

  You try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  You can also try to run a scan using Microsoft Security Essentials.

  See the link to download security essentials:

  http://www.Microsoft.com/security/products/MSE.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• T43 won't start. Only the fan is running. Empty the screen any ideas?

  Do not start and screen in white.  Only the fan is running.  Empty the screen any ideas?

  I solved the problem of: removal of the system RAM memory chip. It started fine. Replace memory in slot. Everything works fine now. Must have been a static accumulation in the memory slot. Barrette memory system is under the keyboard.

• HP Pavilion 23: computer hangs during the boot process

  Computer updates been made 2 days ago and has frozen black screen. Now does not start at the top. Starts the process and then freezes. He did start once yesterday and was going well for a few hours, then got a message saying computer had a problem.

  Error message:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (atikmdag.sys)

  Now back to not start upward again, hangs with the HP logo on the screen.

  Hi there @ldgie25.

  That the Forums are with you!  I understand that, after a few updates, your computer does not start correctly and freezes on the HP logo.   I'm happy to help you with this.

  Since it was started once, but then had a blue error screen, I suggest using the computers HP - use Microsoft System Restore (Windows, 10, 8).   Follow the instructions in the section «restore your computer when Windows is unable to boot normally»  See if it will start normally after the restoration. If yes then you probably want to prevent the offending update to install again.

  Please see the following for how to do this:

  How to temporarily prevent an update for driver reinstallation of Windows 10 - support.microsoft.com

  How to uninstall and updates to block and drivers on Windows 10 - howtogeek.com

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Computer freezes during the update of the BIOS

  I have a hp pavilion dv5-1170ei and he had problems with the audio and the quick launch buttons after the upgrade to Windows 7. I decided to update the bios, because it was the only thing that I had not updated. Now, the computer is frozen with the update of the BIOS still running. I had the same problem with a dv5-1199ei and it worked fine after upgrading the BIOS. Either way, I upgraded from Vista Home premium to Win 7 Ultimate.

  I don't know what to do.

  Help!

  I had the same problem of problem freezing the computer during BIOS update. I have a HP Pavilion DV5 laptop 1126ee. When I update the bios, I don't notice her latest version of the bios installed on my system. I tried several ways of the various positions in the HP support forum. But I couldn't boot my system. Finally I could start my system. find the steps I did: -.

  I first create a crisis recovery HP 2 GB USB key

  downloaded Bios F.16A file on the HP (for HP DV5 1126ee) support site

  Then copied 3602F16. FD AND 3603F16. FD TO USB

  and renamed its copy to 3602.BIN, 3603.BIN, 3602.WPH, 3603.WPH, 3602F16. BIN, 3603F16. BIN. All files in the same USB BIOS.

  Then I unplugged the power and removed the battery.

  Insert USB drive into the system, Hold Windows + B button, plugged in the power and turned on the laptop. When the USB key is charge flashing I took out the key combination. Then I heard a unique single beep (before checking time is 2 + 1 beep and continuous beep). After the shutdown of the system 2-3 minutes automatically. Then I removed the USB and turn on the system. Now my system works perfectly.

  With our thanks,

  -Noushad

• replacing the fan CPU m9350f

  Hi guys,.

  I own the desktop HP Pavilion Elite m9350f PC and I believe that my CPU fan may begin to die. I opened the case to see if I could remove it for cleaning first, but I can't understand how it comes off. I see a little clip I can get, but that seems to do nothing. Can someone help me to take off the fan? Also direct me to where I can find a replacement for this model fan, since HP parts section does not list anything for my product.

  Thank you

  Try the HP Partsurfer.

• Process creates the CPU to overheat and the Fans to run like crazy:

  I am ripping DVDs on different Macbook cradle fully aware that it's requiring treatment.

  The 2011 with 16 GB of ram and hard disk SSD, the process runs on 330% of the processor, blasting the ability and heat

  revolves around 100 c/213 F.

  Interesting enough the same process on 2 late Mo Pro 2008 with less ram do not overheat in the extraction process. The program are identical on all the Pros of 3 MB. The processes are the same, but on the old MBpros the processor load is between 130-150% up to more heating is not that great a problem.

  But the MBPro of 2011 with top material tearing overheating of the processor and fans running at full speed.

  I noticed that too much work with other programs or is running only a few programs at the same time seem to heat from the processor and the fans make some noise + cpu run hot with my MBpro 2011 and El Capitan.

  It is possible to restrict a program that use a large part of the resources to avoid overheating?

  Other solutions?

  Well a Late 2008 Macbook Pro has a intel core 2 duo, so the max he could run is 200% (2 CPUs time 100%) if the application can do enough on 2 processors in parallel.

  Your 2011 Macbook Pro has very probably a 4 core CPU intel i7 with hyper-threading.  If an application can use hyper-fils, there is a potential of 800% max.  The 330% could just be that the DVD cannot keep up with the CPU, so it does not hit its maximum potential because of the famine of data.

  I don't know if the speed of the DVD drive in 2008 was the same as the 2011.  If the 2011 is able to read data more quickly than the 2008, then it can provide given the CPU faster, keep the much busier CPU so it can consume more power, and more power consumption more than the heat generated.

  MacBook pro 2011 ends a DVD in less time than the 2008?

  Basically, you are trying to compare 'Granny Smith' vs 'Golden Delicious' apples and expects the same taste.

  Regarding the other programs, put this SSD in your Macbook Pro means that any code or data that the application needs to get the disc are convinced order or magnitude faster, so that the application did not slow the CPU and keep crank, causing the CPU to keep them busy and thus attract more power, which is converted into heat causing fans to run.

  It is also possible that your SSD generates more heat.  Solid State does not always mean longer running costs.  Much would depend on the brand and the model of the SSD and it is the power profile, and it draws more power for writing vs readings, and how much nature more expensive power you're done.

  Information point.  I put an SSD in my 2009 27 "iMac and it works more hot because my iMac can do more in less time.  I put an SSD in my Macbook Pro 2011 and if I ask him to do a lot of work, like backups, it starts its fans, as the SSD is always quick to provide data for backup, there is no waiting for the discs, leaving the lower idle CPU.

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Pavilion dv7-3078nr: replacement of the fan of HP Pavilion dv7-3078nr - party?

  Cooling fan does not work.  Receive 90b error message.

  I plan to order a new fan, but must determine which party to the order number.  By manual:

  1. P/N 666527 - 001 (for use with computer models equipped with an AMD processor and a graphics subsystem with discrete memory)
  2. P/N 666526 - 001 (for use with computer models equipped with an AMD processor and a graphics subsystem with UMA memory)

  How do I know if my laptop uses UMA or discrete memory?

  The laptop has a graphics chip from ATI Mobility Radeon HD 4530 Series.  I understand that it has 512 MB of GDDR3 memory on the card.

  This, I suppose that this system is considered as having discrete memory and so I should replace the fan with the part number 666527-001.

  Please confirm the use of this part number or otherwise.  Thank you.

  Sorry, missed his discreet

• HP Pavilion a6412p computer cannot read the crd in removable memory

  I have HP Pavilion a6412p desk top, Windows VISTA. It has 5 disks removable (G, H, I, J, K. For several years, I have inserted my memory card into the slot on the front of the computer & photos appeared on removable disk G. This works-error msg none liked doesn't say "insert disc". Other removable disks do not work either. I can open the memory card on my printer all-in-one Epson, photos appear in the window of LSD, but when I try to record on my computer, does not work. Response of Epson & support said I should clip on the removable disk icon to find the photo file. Download the same error msg. My other option would be put in the memory card into a separate card reader, but I can't find anywhere on my computer to connect the player.

  No internal card readers are USB powered and activated.  On the displayed model PC, USB ports before are not visible, so must be behind a door or flap under the DVD players and in the Bay of personal media.  Also there are USB ports at the rear of the case near the audio ports and network.