Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

Similar Questions

• Pavilion g4 will not start

  I have a g4 Pavilion that will not pass the main logo at the beginning. I did a quick test of system and get software disk errors hard drive dst short. do you have a large trial and it also stops to with ¨type:system... result: failed¨ another test read ¨type: hard drive... result: failed¨ can I do to make it back or I get a new one, this laptop is not even a year old.  She has windows 8. I´d appreciate any help. Thank you.

  The hard drive has failed and needs to be replaced. Because the laptop is less than a year, you should still be under warranty. Contact HP support in your country /region and counts test results. Usually, they will send a new hard disk that is easily replaceable. If you have not created your recovery media you will need too... Worldwide contact information can be found here >Contact HP

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  Please have the link below to download correct application download Creative Suite 6.

  Please answer in a private message serial number that you use to activate it.

• HP Pavilion DV9500 will not start

  I have a HP Pavilion dv9500, it crashed right after an update.  When I turn on the computer, everything looks the same, but the screen has vertical lines of color, then it starts white turing, then it fades on the black screen.  F10 does nothing, Esc does nothing. And of course it is out of warranty!  NEED HELP

  I have a HP Pavilion dv9500, it crashed right after an update.  When I turn on the computer, everything looks the same, but the screen has vertical lines of color, then it starts white turing, then it fades on the black screen.  F10 does nothing, Esc does nothing. And of course it is out of warranty!  NEED HELP

  Hey Carollinagal

  do a safe mode system restore to before the problem

  ·

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. reboot your computer.

  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.

  3. Select theSafe Mode option with the arrow keys.

  4. pressenter on your keyboard to start mode without failure of Vista.

  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Vista goes into safe mode.

  6 do whatever tasks you need and when you are done, reboot to return to normal mode.

  and change the way you receive updates

  do not part of microsoft 3rd hardware drivers download

  You can find them in the hardware or the computer manufacturer, because it can be a graphic driver problem

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  Walter, the time zone traveller

• HP pavilion a6530f will not start

  I've had my hp pavilion a650f for a while now, but it froze and now it does not start at the top. It does not display anything on the screen [Yes monitor works] and does not beep. I have tried to remove all the ram, using a chip work in each different slot, then try a slot at a time. I also thought that my cpu radiator became very hot to be only for a minute or two. I watched very closly at my motherboard and saw not a single ceiling was blown. Also when I take all my ram and put again, it still is not a beep. Everything is always origanel, but on the cpu, try to fix it, I put a new thermal is dedicated to the but nothing happened, the cpu still very hot. If you have any suggestions, please tell me, I am not willing to get a new motherboard, the old one would be repair. Finally, I took the hard drive to use on this computer, so I wonder if that could affect it. I also removed all pci cards and reinstalled the and even tried to install a pcie card that BT was eventually released because nothing happened.

  Hello mwoj00

  If everything turns on but nothing never appears on the screen, nor is there a beep? If so, it seems that maybe it's a CPU, motherboard or power supply problem.
  1. If the computer can not POST (which should return a beep) the processor might not work to run the self-test instructions. The heat you describe could be due to a short circuit in the CPU or receiving too much blood since you said you already tried to replace the thermal paste.
  2. the motherboard contains the processor and is interfaced with many components. So if there is a problem with the BIOS or a circuit, it can cause problems like this to happen.
  3. If the power supply is none working them properly, it can send too much or too little voltage to power everything correctly. Too much tension can on components of heat and the Federal Republic of Yugoslavia, while too little energy will prevent all components currently on/off.

  Order, I put it in what seems to be the most likely culprits. Have you tried to clear the BIOS settings? The link on the parchment of the previous sentence to the section 'clear the BIOS settings '. Also when you say that the monitor worked, have you tried it on another computer?

• My HP Pavilion DV6 will not start after replacing the screen

  I just replaced a cracked screen by following the instructions in the maintenance manual and now it does not start. The power light turns on and the fan works but nothing else happens. What can I do to trouble shoot this problem?

  The most common problem is the connection of the cable to the screen.  Make sure that it is tight. Check the connection to the motherboard as well, but it's usually OK.

• HP Pavilion dv6000 will not contribute to that.

  I have a HP Pavilion dv6000 for some years, and suddenly, he will supply any.  I don't know that something happens at all when I press the power button.  What's weird is that when I connect the power, the LED AC (the one with the lightning bolt above it) lights and stays on for 30 seconds and then turns off.  During this time and afterwards, not at all, the lights, and the computer will not power.  I tried to remove the battery and power cord and holding the button power for 45 seconds, several times, but nothing is working.  I hope you can offer some tips on things to try.

  Thank you

  Zach

  I made a breakthrough!  When I took the screen out, I also unplugged the inverter Board who joined the power to the LCD screen.  I plugged the AC and tried the power button, but it does not turn on.  While I would not lose the Commission, I plugged into the computer.  Before my eyes, the computer began to market.  At this point, I was able to switch to an external display (using Fn + F4) and I was good to go.  Bottom line is, if you have a laptop series dv which only lights up with a broken screen, remove and the inverter Board, plug AC in the reatattch of the Council of the inverter.

  Now, this won't probably solved most of the problems you guys are, but it fixed mine, then I'll call the expressions of folklore on this one.

  Thank you

  Zach

• Pavilion E017DX: Keyboard Pavilion E017DX will not automatically detaches the Instructions in the manual will not work

  (It is not relevant to OS)

  I have very very alert followed the instructions in the manual 'for laptop HP Pavilion 17"downloaded from the HP website.

  There was no ambiguity on the two screws to remove to release the keyboard.

  However, after releasing their (and, of course, carefully following all prior instructions as well), the keyboard will not loosen, it remains as tight as a tick and is not even remotely let go.    All that happens when I "insert a thin tool into the output port of the keyboard and press the back of the keyboard" as indicated in the manual is that the "." key (period) comes off!

  There is also a hole size of finger under the WLAN (not mentioned in the manual) that is labeled clearly communicated keyboard (engraved on the metal).    Pushing hit as firmly as possible without risk of breaking the computer accomplishes absolutely nothing.    The keyboard still not loosen.

  Something seriously missing in the instructions and/or the design of this computer is seriously insufficient.   My next computer will not be a HP.

  PS: I got a lot of experience in the repair of laptops of all kinds.  Lack of familiarity with the technology of the laptop is not the problem remotely.

  Usually, you will have to lift the loose keyboard around the edges while pushing from the rear. I hope that this video will help: Remove keyboard

  If you found my answer helpful please say thank you by clicking on the icon cursor.

  If my answer has solved your problem please mark as the "acceptable Solution". Thank you!

• HP pavilion zv5000 will not cds or dvds. Operating system is Windows 7.

  I was able to run Microsoft Office and download on my laptop, but now when I put another cd in the drive it will not work.  My computer tells me to insert a cd, even if I already have.  Thank you.

  Hello

  If you do not have restart then try the CD/DVD drive.

  Check with HP, their drivers support and documentation online and ask in the Forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  --------------------------------------------------------------------------------------------------------------

  After all the foregoing:

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• HP Pavilion dv7 will not play audio via HDMI

  Hi I noticed recently that my laptop Pavilion dv7 entertainment will not play sound through the TV. The image is on the tv but its is running through the speakers of the laptop? I never had a problem with it until now. When I open the sound options, the ATI HDMI says it is not connected and it won't let me select it so it is connected? Help, please?

  Best regards, Sez.

  Sez Hi,

  Try to use Recovery Manager to reinstall your graphics driver AMD package as this will also reinstall the driver Audio HDMI AMD - how to use the Recovery Manager to reinstall the software and drivers is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP Pavilion: spooler will not delete print jobs

  Printer spooler will not delete print jobs.  The status is: Error - sent to the printer.  Canon has tried to help by using several methods to remove print jobs in the spooler.  None of them worked.  What I can do next.  Thank you

  Hello

  Please click HERE to access the procedure which should solve the problem.

• Pavilion a6500f will not play CD/DVD

  Everything has worked until a couple of days, when the Optiaric DVD RW cannot read or recognize anything. It will not read a music CD or a CD of the software. I tried to reinstall/upgrade to update the driver, but each time it says that the installation/update failed. I tried this from the menu troubleshooting as well as HP Web site.

  I've tried using pages say to do. I even uninstalled all hoping it would recognize it as new, but when the computer restarts, I received a message that says that the driver installation failed.

  Is there anything else I can do?

  Thank you in advance, I hope!

  Follow this drivers:

  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

• My Aspire will work you tube videos but does not run any other type, advice please.

  As stated above, my aspire will work you tube videos but for example if I try to watch traffic cameras all I get is a black screen. The meter also trying to run an internet speed test does not appear? I'm not computer savvie then please don't baffle me.

  you're probably missing some Java components (download x 86 and x 64) or the flash from adobe on your system drive (chrome has its own).

  https://www.Java.com/download/

  https://get.Adobe.com/flashplayer/otherversions/