Pavilion a6403w windows 7 ultimate 32 bit freezes during restart

Similar Questions

• Windows 7 Ultimate 64 bit freezes on startup after the last update.

  I think I have updated a major problem with the latest update from microsoft.

  I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

  That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

  This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

  I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

  I gave up, I formatted the hard drive last night and just reinstalled.
  Microsoft Windows 7 Ultimate 64 bit,
  NVidia graphics driver
  Microsoft Security Essentials,
  Microsoft Office 2007 Ultimate,
  Apple's iTunes and Quicktime.

  The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

  My processor is an Intel Pentium D
  I have 4 GB of RAM.

  There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

  Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

• Windows 7 ultimate 32 bit freezing

  I install window 7 Ultimate 32 bit, and last night I got a problem, my Pc suddenly freeze in the middle of my work, after that when I restart manually, asked me to start window normally or repair. First I start normally and it took about 45 minutes to start, but after that every thing like was going slowly, as if I'm trying to run any software he responds after 69 seconds, usually, it takes 2 seconds and when I am trying to see any movie or trying to browse my other hard drive storage drivers it freeze and not ANSWER DO NOT so I left my computer idle it come to normal again, but even if do the same thing happens overtime. Please help me and please don't tell me to format and re install Windows 7 again.

  Here are my PC details
  Intel original 945
  Core 2 Duo
  2 GB Ram + 1 GB ram = 3 GB Ram (Zeon)
  500 GB hard drive of 160 GB = 660 GB (seagate)
  Nvidea 520 2 GB graphics card
  It out put: 230 VCA 50 60 Hz
  Please Sir, mam help me I am in trouble and almost sat idle until the screen because if I click PC shows me is unresponsive

  Hi Bubun10,

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. do this problem occurs everything working on all programs?

  I would suggest trying the following methods and check if it helps.

  Start in safe mode then put the computer in a clean boot state and check if there are any third-party program is causing the problem.

  Step 1: Start in SafeMode in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft support article and check if it works.

  Optimize Windows 7 for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope the information is useful.

• Windows 7 Ultimate 64 bit - freezes when playing

  Core i7 920 CPU
  8 GB Ram
  ASUS GTX285 graphics Card

  I had Vista Business 64 bit on for 9 months large runnning
  I play Call of Duty 4 and 5 - which, with Vista, went very well with all the settings of high
  I installed Windows 7 ult 64 bit without material change and then play COD 4 or 5 he began to randomly freeze the system and the only thing I could do was shut down the system by holding the power button in.
  Sometimes the game would go for fine 2 hours that other times she would freeze after about 20 min of (sometimes as fast as 5 minutes in the game)
  I tried to adjust the graphics in the game in low heat
  replaced HARD drive of (good excuse to get some old replaced HARD disk)
  I set up a dual monitor on the computer and run hardware monitor to check the time that the game was running - everything seemed fine, but every now and then as it froze it would give me a blue screen with the following error:

  A clock to interrupt not received on a secondary processor in the allotted time interval.

  0 x 00000101 00000000000000 x 0 x 0 000000000000000019 0xfffff88002f63180 0 x 0000000000000002

  what I did in the end is reinstalled Vista on a second partition so I could dualboot and reinstalled the games.

  so under the same hardware with the same software installed Vista 64 bit is fine and Windows 7 64 bit freezes randomly when you play

  I regularly update the two BONES and my bios is also updated - latest drivers for the graphics card installed

  everyone had the same problems and know of any way to solve this problem?

  Morley71,
  In addition to update your video card driver, you must make sure that all hardware components have installed drivers Windows 7.  Check for audio, NIC, chipset, etc...  and make sure they are all drivers of version of Windows 7.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion Desktop Window Vista ultimate 64-bit. Failed to start. Can not put in safe mode, cannot restore the system.

  HP vista ultimate: commissioning can not repair computer: Signature of the problem, Startup Repair v2; ongoing state: the disc problem signing 01:system; 02: 6.0.6001.18000.6.0.6001.18000 04:196611 03:05 6: registry corrupted 06: no causes 07:0 08:2 09:WrpRepair cause of root of ID:1033 local 10:0 found: c0000218 Bugcheck. papameters = 0x9046cc98, 0 x 0 0 x 0 0 x 0 Action required: System Restore. Result: Failure error code: 0 x 490 of this office that I bought as recently used pc, I have No Boot up, recovery disks. Please can someone advise? »

  I think that some malware has been inadvertently downloaded and deleted the entry of game and ran anti-virus and found no malicious software, again, I think that this has caused the problem I have now.

  Any advice appreciated,

  KatyK

  Hello

  Yes, you can create a repair disk.
  a. Click Start.
  b. click on all programs.
  c. click on Maintenance.
  d. click on create a system repair disc.
  e. Insert a DVD into the drive, and then tap on create disc.

• Windows 7 Ultimate 64-bit hangs during antivirus and backup system analysis

  I have problems with my PC. Last night, before retiring for the night, I noticed that Microsoft Security Essentials icon is yellow and warning me that my computer was in danger and had not been scanned for viruses for awhile. Normally it is set to run automatically on a schedule, but it does not work if my computer is set to go to sleep after a period of inactivity (which is because I want to save energy). So I have to manually run the virus scan. I have it set to run a FULL scan and then went to bed. In the morning, I noticed that my computer has been completely closed. It would normally be asleep and she simply by moving my mouse wake up. I had to hit the power button on my PC to start upward. The warning message that Windows did not close properly displayed and gave me the boot options. I just booted normally. As the virus scan has been the last thing my computer did the night before, I decided to try to run a FULL scan again. It crashed my PC. I started again and tried a QUICK analysis, which worked well. I searched "Microsoft Security Essentials plant system" and found a recent instance with someone else, and after more detailed diagnosis, they determined that it was probably a failing hard drive or a bad memory. The recommendation was immediately back up their system of hard drive and replace it.

  Before you run any Diagnostics to determine my culprit, I decided to start a backup system just to be safe. I ran Windows Backup and choose "Create a system image" and he has done on an external hard drive on a USB3 docking station. He got about 90% through the backup, then my system crashed. No error message, just a full stop.

  Unfortunately, a not save the link to the original set of instructions to diagnose why the system crashed during the anti-virus scan.

  Now I ask... What can I do to save my system if it crashes my computer?

  Hi Greg,.

  Thanks for posting your query in Microsoft Community.

  I understand that the system hangs when a complete analysis of how MSE or backup system and I'll be happy to answer your query. This could be due to MSE not updated and that's why he showed the yellow icon. We will try the following methods and check.

  Method 1: Microsoft Security Essentials (MSE) update

  For update to MSE, please see: How to manually download the latest Microsoft Security Essentials definition updates

  Here are some methods that you can try in order to solve the problem.

  Method 1: Perform the clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: Clean boot material and check.

  a. go to Start and type Device Manager in the start search field.
  b. type Device Managerand select Device Manager from the list programs.
  c. right click on the sound card, video card and NIC, one by one, then click on disable.
  c. restart the computer.

  If it solves your problem, allow hardware devices that in time to find the exact device originally this problem. After you find the device that causes the problem you can solve by installing the latest driver or replacement of the device.

  Method 3: Do restore the system from the Windows recovery environment and verify.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• HP Pavilion g6-2205sa upgrade lower of windows 8 for Windows 7 Ultimate 32 bit

  Hi all

  I am currently the decommissioning of a HP Pavilion g6-2005safrom 8 for windows work Windows 7 Ultimate 32 bit for a client and I'm having some difficulty in finding all the drivers for it that the HP OS selection shows that Win 7 64-bit to get drivers for.

  I have a problem with 2 devices are 1. PCI device and 2. SM Bus controller

  For the first time, the PCI device, the hardware ID are as follows:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183F103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  For the SM Bus controller, the hardware Id are as follows:

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183F103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183F103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  I hope this is enough information to locate a driver or two for me.

  Thanks in advance

  Ash

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55970.exe
  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55978.exe

  Kind regards.

• Problems with drivers hp pavilion dv6-6c65sx new after that I installed windows 7 ultimate 64-bit

  I have hp pavilion dv6-6c65sx A7P80EA #A2N. I installed my windows 7 ultimate 64-bit myself and I still have two problems with the hardware drivers.

  1 - once, I downloaded and installed the new graphics driver file name Win64_152822.exe for support of the Intel, the Standard VGA Graphics Adapter the unknown value and it may need new driver. Take a look at the screenshot for more information.

  

  

  

  2. I can't use a fingerprint reader to log on windows. It says that I have not installed on application management. I tried to download some applications also tried to update the driver but nothing works for me.

  It's for more details

  Validity sensors (WBF) (PID = 0018)

  Port_ #0001.Hub_ #0003

  Hello:

  It is the only driver you must install for your model.

  He installed the AMD graphics cards and Intel.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

  In order to register your fingerprints, as well as the print real finger sensor driver, you must install the security software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Pavilion a6220n Ethernet Controller Driver for Windows 7 Ultimate 64 bit

  I upgraded from 32 bit Vista to Windows 7 Ultimate 64 bit and the driver for the Ethernet controller is missing.  Can someone help me locate a compatible driver?

  Thank you very much!!

  Hello:

  This has me buffaloed.

  According to the specifications of your system, you have the Gigabit Intel 82566DC-2 network connection.

  OK, this is my last chance. If this does not work, I don't know what to tell you...

  I took the driver file and extract the files in a compressed folder, I named the network drivers. I downloaded on my space Skydrive Ms.

  Download the file, Unzip it and make sure that you take note where you saved to. It should record in your downloads folder in Windows 7.

  Now, click your network adapter in Device Manager, click on update driver driver. Select the browse my computer for the software option. Navigate to the folder that you have unpacked with network drivers and see if it loads the drivers then. If not, I give up.

  Paul

• 15 - ab098na: Pavilionm 15 Windows 7 Ultimate 64 bit drivers Ethernet required

  Hello
  
  I need the Ethernet drivers for my Pavilion Notebook running Windows 7 Ultimate 64 Bit OS.
  
  When I go to Device Manager I get the IDS of equipment as follows:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80B8103C & REV_07

  PCI\VEN_10EC & DEV_8136 & SUBSYS_80B8103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Everything works fine, but no sign of the NIC, and I really need this to work. Please don't propose that I return to Windows 8 or 10 will never happen as long as I have breath in my body.

  Thank you

  Excellent - all sorted, thank you very much

• Satellite A200 (PSAE6) crashes on Windows Vista Ultimate 32-bit

  Hello

  I recently had a few frequent freezes on Windows Vista Ultimate 32-bit Edition, I think it's maybe the video card (ATI HD2600 mobility). I have already downloaded and installed the latest drivers from the Toshiba site, but it continues to, sometimes, when I'm playing games, the screen blinks for 5 seconds or more and then would become black, completely erased, but the background sound and everything still works well and I am able to shut down the PC by pressing the power button once and then restart it normally.

  It's a minor problem, the major problem is the freezing point, it freezes completely without warning, but oddly enough, he freeze by practicing a game! But freezes on normal operations (internet, office, etc.). I did the tests, tests of HARD drive memory, all in good health, and worse, on the Windows Event Viewer could not detect any problem, simply says 'unexpected system shutdown.

  I'd appreciate help please.

  Thank you

  Hi I do not know if this will help, but you've got service pack 1 installed on your laptop, as when I installed it on my desktop the first time it caused blue screen errors and gave me a lot of problems, including the error messages that seemed to come with applications, I opened and a boring IQRL driver equal or less than but could not work why and then ultimately , I had so many problems that I had to completely reformat my office and I removed my scanner XP and webcam (both had vista drivers) and when I reinstalled service pack 1, it was beautiful, if by any chance do you have anything attached to your XP laptop and vista drivers as these seemed to be what was causing my errors.

  Also a question about your graphic card drivers, I have the same laptop as you and was looking for updates to the graphics driver and couldn't find them anywhere on the site, where did you find yours? I use Vista Home Premium 32 bit, my model number is A200-28 p (PSAE6) and I would like to know if there is a new graphics card driver but can not find on the basis of knowledge, so the fact you have updated your would be could you point a new user in the right direction :-)

  Thank you

  Simreaper

• G7 2233 pilots missing after windows 7 ultimate 64-bit new installation

  Hi - I received the computer modeled above with 8 pre-installed windows. I installed a clean install (wiped readers) and installed the operating system Windows 7 Ultimate 64-bit. When I did, none of the internet connections would even work. I since found (somehow) a pilot who was consistent, which deals with the missing wifi adapter, but I still need the following items:

  Ethernet controller: PCI\VEN_10EC & DEV_8136 & SUBSYS_184B103C & REV_05

  PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01

  UNKNOWN DEVICE: ACPI\HPQ004

  I can't find these anywhere, PLEASE help.

  When you request support, please provide the HP model name and/or product the full number of the computer in question.

  Assuming that you have a HP Pavilion laptop g7-2233 cl, specifications, other than the CPU, the RAM and the size of the screen, seem to be the same as my sister-brother g6-2210us laptop HP Pavilion computer. Drivers 64-bit of Windows 8 listed for two computers are the same. I installed Windows 7 64 bit on his computer about a month ago and used the following drivers of multiple origins;

  Drivers for Chipset AMD (Chipset, USB 3.0, SATA/RAID)

  AMD Catalyst Display Driver

  Realtek FE family LAN Driver 

  Card reader driver Realtek PCIe RTS5229 

  HP sp54972 Atheros 5xxx/9xxx WLAN Driver

  HP IDT HD Audio Driver sp59620

  HP sp58539 touchpad driver Synaptics PS2

  HP CoolSense sp60051

  and from Windows Update "HP Mobile Data Protection Sensor.

  It is possible that the WLAN chipset on your machine is different and may require different drivers.

  I've also updated updated the Synaptics driver to v16.2.21 on Synaptics site. Some of the factors above may require the HP sp59202 software framework. In addition, the WebCam requires the package of "VideoCM" of the "SWsetup" folder in the original installation of Windows 8 and CyberLink YouCam sp59986.

  When you are finished, there is no unknown device on its system.

  Please send Bravo

• 26 of Firefox crashes out of Windows Vista Ultimate 32-bit.

  No matter if I click on the red X, go to file-> exit or press Alt + F4 to exit Firefox under Windows Vista Ultimate 32 - bit. It almost always produces an error message that Firefox has stopped working.

  I can't find how to post a JPEG Screenshot of the error here.

  This will not occur under Windows XP Pro.

  Otherwise, the browser works fine in a BONE.

  Those are the two reports of the crash on Adobe Flash Player.

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G