PAVILION A6504UK (FK508AA) BLACK SCREEN on HP w1907v LCD MONITOR

My A6504UK is 2 years old, has built-in integrated graphics Nvidia GeForce 6150 SE nForce 430 and I use the HP w1907v LCD wide screen monitor.

Recently, the monitor was flashing to a black screen and then return to the Windows form, showing what I did previously.

This flashing lasts for about 10 seconds and is intermittent, there is absolutely no reason or warning to what happens.

There seems to be no breakdown in the quality of the screen, but I struggled to install the Nvidia drivers for 1440 x 900 native resolution. When the driver is installed, it does not always show the native resolution from the list of choices.

By pressing the button Auto / Select on the monitor makes no difference either.

I'm running Windows 7 Ultimate and it's a complete installation after the PC has been returned to factory Vista settings.

Can someone give me a hint as to if it is the monitor or the integrated graphics card (more likely)?

I can install a separate graphics card and disable the onboard easily graph?

Any help or advice would be much appreciated!

Question of likely monitor, less likely a video card problem. Can be confirmed with another monitor if you have an or try this monitor on another system. Installing a video card will automatically disable the onboard video.

Tags: HP Desktops

Similar Questions

  • Pavilion x 360: black screen after log in

    My hp Pavilion x 360 worked very well today in the morning when I turned it on it everything seemed normal I put in the password journal and access the screen once I hit went balck bu the slider was still showign how can I solve this problem since I really need for school?

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

    Kind regards

    DP - K

  • Pavilion G6 1332el: black screen after installing drivers

    I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

    Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

    After all, I did a normal Shut Down.

    When I powered THE next day, after Windows Logo disapier, only black screen remains.

    I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

    I'm here, can I di to solve my problem?

    Thank you!

    apashi

    I'm guessing that you have reinstalled Windows from a DVD, right?

    Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

    You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

    You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

    Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

    Or, if you prefer, you can do the same by contacting HP Customer Service:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

    Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • HP Pavilion g7 Notebook black screen at startup (freezing applications)

    Hey everybody,

    I use a laptop laptop HP Pavilion g7 running on Windows 7 Home Premium (64 - bit, 6.1 Build 7601).

    Processor: Intel Core i3 CPU M 380 @ 2.53 GHz (4 CPUs), ~2.5GHz

    Memory: 4096 MB RAM

    I use this laptop for two years and this is the first time I have encountered this problem.

    The problem:

    Whenever I turn on my computer, it goes to start normally.  Before the connection with my user name appears, there is a pure black screen on during about 5 minutes before.  During this time, all I can see is my move move.  Whenever I can finally connect, I wait until it has finished start up and continue to open an application.

    Whenever I was able to open an application, it will run for about 3 minutes, but then everything freezes.  After the use of CTRL-ALT-DELETE, I see a message on a black screen that says "Failure to display security and stop options." He then told me to press ESC or press the power button.  If I press ESC, the laptop is still frozen. If I press the power button, I go through the same process over and over again.

    Even with the SafeMode (Networking), I get a black screen for a few minutes before being able to see my username on the login screen. Fortunately, Safe Mode works very well.

    I ran scans using Norton and Malbytes, found tracking cookies and malware and removed them, but my laptop is still the same.

    I don't know what to do. I hope someone can help me solve this problem.

    Thank you!

    Tsukiou,

  • HP Pavilion 14-n059TX: black screen

    Hello!

    I have a problem with my HP laptop Windows running 8.1. At first, when I go to the computer setting, he showed that this app can not open. File Explorer is running with administrator privileges. Restart the Explorer of files normally and try again. I thought it was told me to restart the computer. So I restart my laptop, but after that, he showed me the black screen and a blinking cursor. I tried a solution to remedy, but it won't work. Can someone help me with this?

    Hi @LeonValentine,

    Welcome to the HP support community!

    I read that you have a problem with the file Explorer on your HP Pavilion Notebook 14-n059tx and some applications not working not properly. To restart Explorer. Press Ctrl + SHIFT + ESC to open the Task Manager, locate the Windows Explorer, right-click and select restart, and then restart your computer and see if it helps.

    You may need to turn on network discovery. Here is something that shows you how to do this, it is Windows 8, but it works the same.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

    Please get back to me how that happens.

    If you want to say thanks for my effort to help, click on thumbs upward to give me a Kudos.

    Thank you.

  • Pavilion g6t-2000 black screen & Sleep Mode problem

    Features of the laptop:
    Name: HP Pavilion g6t-2000 CTO Notebook

    CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

    GPU: AMD Radeon HD m 7670

    OS: Windows 7 64-bit

    So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

    Things I've tired:

    • Removed the beta driver and the GPU of HP drivers installed via the HP website
    • Update BIOS f.25 (latest driver)
    • Changed the power of options such as checking to see if hybrid sleep is turned off
    • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
    • Running sfc/scannow

    On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

    I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

    I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

  • Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

    System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

    Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

    Hard reset has been tried 3 times with no improvement.

    External monitor is connected but no signal has been out of the laptop, screen is black.

    Done a few times this page to reset the BIOS setting blindly:

    http://support.HP.com/us-en/document/c02217843

    BEEPS heard when you press F10 or F5 during procedures. But still black screen.

    What can I try again?  Please advice kindly!

    Hi @ sokw,

    I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

    HP technical support are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

    (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click the "Show Options" at the bottom right.

    (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

    I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

    Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • HP Pavilion laptop g6: black screen with white cursor, connect

    My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please

    B_S2

    Hello;

    Let me welcome you on the HP forums!

    As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display.  Could be a runtime program. could be drivers, might be a Service.

    No easy way to tell.

    Demarrer start in safe mode, type MSCONFIG in the start area.  When that opens, turn off ALL startup items. Reset.

    The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again.  The last of them that you re-activated was the problem.

    Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/

    If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab.  Check the hide services Ms.  Then turn off half superior Services.  Reset.

    If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.

    If the problem is not resolved, turn off the other half of the services.  Repeat as above.

    No easy way to do...

    Good luck

  • HP pavilion i5-n040us: black screen.

    Thank you PK of Provost David. Your solution to my problem of closure has worked. But there is another problem that persists. When the screen turns off screen always appears in black. Pressing the mouse button or pressing any button turns on normally display. But when the screen was interrupted with the appearance of the black screen for extended periods (45 min or more), touching the mouse pad or any key back on display. All I am able to do is to keep away the machine by the power button and put back on.
    And with the solution that you have given for the closure, it worked. But turning Starter fast return on brings back the problem of closing so I turn that on.with that I have no problem closing.
    Any help with this?
    Thank you

    Hello

    You are welcome

    Try the following.

    Download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62417.exe

    When this has completed, restart the laptop.

    When windows has reloaded, download and install the following.

    Intel Smart Connect driver technology.

    Intel HD Graphics Driver.

    Once completed, restart the computer again.

    Kind regards

    DP - K

  • HP Pavilion dv6-2008eo: black screen

    After downloading Windows 10 my work computer stop, black screen and I can't turn it on.

    Hello

    Thanks for posting in the HP Support forum.

    * Scenario1 * if you press the button to turn on the computer and it does nothing (no light, no sound, no picture on screen) that sound like a hardware problem and is less likely to be caused by Windows 10.

    * scenario2 * if you press the power button, the computer starts (it has little light on the screen) but the screen is black and white (but working) happened after Windows upgrade 10, then it's software caused by the bad update of the new operating system (defective or full).

    Here's a full article on the startup problem. It's very good details and covers pretty much everythng. Please, read and follow the instructions. Even though it says Windows 8.1, it is applicable for Windows 10, so > http://support.hp.com/us-en/document/c03515402

    If the problem is as scenario 2, I guess you can use the built in the recovery of the computer partition so that you restore the computer and Windows if you default factory and get back to work. Information and instructions here:

    > http://support.hp.com/us-en/document/c04758961

    > http://support.hp.com/us-en/document/c04758961#AbT8

    Looking forward to your comments.

  • HP Pavilion 13-s128nr: black screen on startup = upwards

    My wife has a 13-s128nr Pavvillion.  When you turn on the machine, you get a black screen.  The power light is on but nothing shows in place... totally black.  I rebooted the machine a few times the same result.  I left the machine on the battery drain.  He plugged restrted and back in her question.  We bought the machine in November 2015.  What are my options to get this back up and running.

    Thank you

    Rob Topham

    Hi Robtop,

    The steps that I've shared below;

    -Unplug all the devices usb, battery and power cord.

    -Press and hold thebutton / stop' "for 30 sec.

    -After this, connect the battery and power cord again.

    -Turn on again and check the status of your device.

    If the problem persists, your device has most likely outcome of the corruption of the bios.

    The steps that I've shared on restoring the bios below;

    1. Turn off the computer.
  • Pavilion dm4 1041tx: black screen after the windows logo

    My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
    Hard drive test results:
    Smart check: past
    DST short: PAST
    Long DST: PAST
    Help, please...

    Hi @vikash4309 ,

    At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

    If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

  • Pavilion dv6 - 7013cl - black screen with caps lock led flashes constantly at startup.

    The laptop was running hot. I cleaned the dust from the fan area. The battery is bad. I checked the voltage on the charger that was 43v - bought a new charger is 18.5 v. I wiped the ram and started with one and moved to different positions. I have now a black screen with the cap lock key blinks blue continuously and the f12 key led light ceases to orange. Any suggestions what I should try next and which snaps the seeing Cap continuously flashes means - that is a code or have a meaning?

    According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • HP Pavilion PC p2: black screen after log in

    Hello

    My screen on my desktop turns black after login.  I can still see the cursor.  I hit ctrl alt del, went to Task Manager typed in rstrui to do a system restore.  I went back a few months of restoration, but it did not work.

    The weird thing is sometimes I wait about 30-45 min disappears from the black screen.  But then reboot, I have to start the same thing.

    Any ideas or help would be very appreciated.

    Ryan

    Hi Ryan,

    Check the following points.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press DELETE.

    Select Task Manager.

    At the bottom left, select "show processes from all users".

    Click the name column header to organize processes in alphabetical order.

    Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

    If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)-in your downloads folder.

    https://toolslib.NET/downloads/finish/1/

    A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

    Click the scan button.

    When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

    It starts on the desktop correctly now?

    Kind regards

    DP - K

  • HP - Pavilion x 360: black screen

    My laptop turns on request for password goes through the process making known but then goes black, but I can see the mouse cursor and can move even the pop-up to renew my virus software rises and the Task Manager works but except that it stays black it happened when trying to download Spotify, when 2 trying to turn it on market and everything came and my spyware virus made a scan and deleted the program I had downloaded a reset and when she came back he was black.

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, old the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session problem occurred initially and then proceed to the system restore.

    Kind regards

    DP - K

Maybe you are looking for

  • How can I find Thunderbird in Afrikaans?

    Once, I found a page that says: download Thunderbird in Afrikaans. When I clicked on the download was made in English and the e-mail page was also English.

  • constant anti virus reports when using firefox

    I constantly receive anti alerts of virus using firefox I was not do this with the Explorer, it seems to be related to the "search request". I get this message "windows cannot find"C:\Users\FAMILY-1\App Data\Local\Temp\NEW26A4.tmp.exe". Make sure you

  • After repair of Staingate

    Hi all I just got my macbook pro 13 "screen replaced for free in Bangkok (I live here) for free by Apple, which I am pretty happy given they don't have an official store here (part came from Singapore and a centre of service of third party played the

  • Want x 360: AccelerometerSt.exe/MSVCR110.dll question

    I recently bought a HP Envy x 360 (literally yesterday), because it was highly recommended by my help at best buy. Since yesterday afternoon, I had a problem with the display driver that comes will not be corrected. When I start my computer, it says

  • Malwarebyte Anti-Malware

    Hello Happy New year, I have a version of Malwarebyte Anti-Malware pro. Now my question is, can I uninstall the antivirus one another and let Malwarebyte Anti-malware as my main AV? Need help. Thank you!