Pavilion DM4-1265dx does not start after the restoration, the new hard drive

Hello:

I have a laptop of clients that a hard drive has been giving an iminent failure message.  I was able to create a disc of recovery and replaced the original HD (640 GB) with a 500 GB HD.  I can't do the factory recovery because the hard drive is smaller, but it allows me to perform a recovery of the operating system.  The question that I am running is after he read the DVD 6, the system wants to re-start and then it crashes just in the HP splash screen.  If I turn it works, I get could not find a boot device.

How can I get around that, before the establishment with a win 7 CD?  Is this process of recovery to a waste of time, as I did on the previous model HP computers and it has always worked.

Thanks in advance for any ideas.

Mike

Hi cloud:

To be more precise, of memory, there are two options, reset and factory restore.  Factory restore won't do it because the disk is slightly smaller.  Factory reset will allow me to put the recovery disk hard, but when he re - start, it crashes just in the hp splash screen.  When I do the three fingers of salvation, then I get cannot find the boot device.  I made the internal test and everything passes with flying colors.

I finished download an iso image and install from scratch, but I can tell you that it is the system more screwed up that I never ran into 30 years of working with these toys.  I tired to do a repair, but that creates just again the same symptom.

I have an Acer Tablet that I've been able to use the computers acer recovery disk that was not intended (but had the same version of the operating system) and at least was able to get the operating system and software and finished to the top with the right drivers, size of the hard drive has been ignored in their case.

Thanks for help you, it is appreciated, but I doubt I can recommend HP to one of my clients in the future based on what I've run here.  This is inconsistent with a solution of recovery as far as I'm concerned, that MS requires manufacturers.  Lets get real, hardware fails for various reasons, and you may not necessarily the same size hard drives with the rate of change occurring in the industry.  Personally, I prefer a game of installation for the operating system and drivers disks.  Dell is one of the only ones I know who did this, and as much as their material is so so, they do at least that right of the party.

Once again thank you.

Mike

Tags: Notebooks

Similar Questions

  • Pavilion dm4-1265dx does not start after Windows 7 logo

    My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

    I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

    Test Drive: 1
    INTELLIGENT control: passed
    DST short: failure

    Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
    Product ID: XZ298UA #ABA

    Hard drive 1

    --------------------------------------------------------

    Test drive: FAILURE

    How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

    Hello

    You will need to replace the hard drive.

    HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
    Click on the link below and choose your country:
    Contact HP worldwide

  • Satellite 1800-712 does not start with the new HARD drive

    Hello world.

    I am currently trying to install a new HARD drive in my notebook of 1800-712.
    I'm having a few trubbles as my Satellite won't start with my new HARD drive.

    I upgraded my BIOS to the latest version.
    The new HARD drive is a 40 GB Samsung.

    Any suggestions on what I need to do to make it all works?

    THX, Philippe

    Hello

    This device was shipped with 20 GB HARD drive.
    You again is 40 GB.
    I guess that the BIOS does not recognize the HARD drive because of the size.

  • SMU 8108 does not start with the new hard drive

    Hello

    I am currently using SMU 8108 with SMU-1062 q.

    The previous record was borken, so I had to install a new hard drive.

    The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

    Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

    When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

    LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

    I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

    In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

    I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

    You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

    If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

    Was your hard drive damaged through certain events, or it just stop working?

  • Pavilion dm4-1160us does not start after the failure of system recovery

    I have Windows 7 Home edition is installed. In my view, it is 64-bit.

    I get everything by initializing the error message is:

    "BOOTMGR is missing".

    Press Ctrl + Alt + Delete to restart»

    When running various tests (Tuneup, break-in, Start-up, hard drive) in I always get the same failure ID: M4PC2J-5KQ6N0-XD6V41-60VG03. The poduct ID is XH124UA #ABA.

    The case began after my computer froze and I forced the reboot.

    I guess that the hard drive is a gonner. Is this correct?

    Hi Mario,.

    Personally, I recommend to replace the hard drive yourself - it is a surprisingly simple process (and much cheaper).  A brief guide on this is detailed below.

    Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.

    Hard drive 500 GB

    750 GB hard drive.

    The procedure to replace the hard drive begins on Page 61 of your & Maintenance Guide.

    Once this is done, simply use your recovery media to reinstall the operating system on the new drive - this is described in the document of HP here.

    If you do not have your recovery media, let me know because there is another option, you can use it as long as you can clearly read the activation of 25-character product key on your label COST.

    Best regards

    DP - K

  • laptop does not start after you install a new hard drive

    HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

    Hello

    That sound great for the hard drive.

    With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

    The image that should be used is on the following link.

    Windows 7 Home Premium 64-bit.

    You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

    Kind regards

    DP - K

  • Inspiron 13-5323 does not start after the new installed hard drive

    Fall of my Inspiron and Geek Squad said she needed a new hard drive.  I installed a new identical to the former myself blue WD.  When activated, it immediately passes to "Phoenix Securecore Tiano Setup.  Pre-launch tests indicate that the new hard drive works fine.  I tried to start in safe mode UEFI and in the boot Legacy mode, but no boot.  I get a message "Not found operating system".  It is my understanding that this computer has an operating system embedded on the motherboard.  I previously had it improved Windows 8.1 to 10.  When I tried to boot mode safe mode using F8, I had the same operating system not found message.  The F2 and F4 keys on commissioning do nothing different, either.  Am I missing a step in the window settings of Phoenix?  Suggestions while in Phoenix window bringing me could happen to start the system would be appreciated.

    In fact you have reloaded the operating system?  If not, the new drive is empty - it's why you see the message you see.

    You will need all the recovery media, as you did when you received the system - or, if you do not prepare a set, you will need to call Dell to buy a flash drive with the media today.  The alternative is to download Windows 10 TH2, of the same version (standard, pro) that has been installed and activated previously.  You can then reload the operating system.

  • Inspiron 560 does not start after the new mobo

    just relpaced mobo with nine years of old stock that it does not start in windows 7, just goes into repair options, but will not repair.

    He's trying to start windows, it happens from windows, you see the glance just color logo on the screen, then it restarts.

    Yes, it's the same model mobo.

    TIA.

    Check the operating mode SATA for disks - it must be about the same as it was before the jury was replaced (AHCI, RAID, etc.).

    F2 at startup to check.

  • Satellite L30: CD player does not work with the new HARD drive

    Hello

    Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

    My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

    However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

    The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

    Person not answering, so I'll do it.

    I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

    It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

  • Acer Aspire S7 392 does not start after the new Antivirus installation

    Hello

    I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

    As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

    Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

    Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

  • Laptop running Windows 7 does not start if the external hard drive is connected

    I know what is already on a thread, but here it is again (i.e. thread became uncontrollable anyway and did not offer me solutions). I have an ASUS K53S laptop computer Series and use it as a desktop PC. It sits on my desk and never move, I plugged my larger screen, a keyboard and mouse, printer and external hard drive that I keep all my information on i rarely save to local disk. These things represent more than ports USB to the laptop, I have a hub 4 ports on there also. It is just background information; I mean, the laptop is a must.

    Here's the problem: when I start, as I do every morning, I used to see ASUS inspire Innovation - first of all, persistent Perfection for about 1 second, then the laptop will just get on the job and complete its start-up in about a minute (including login). Which was very good until a few days ago when things started slows down a bit, then I rebooted as I always used to with my Windows XP tour. All closed but return is reactivated and it hung on the opening screen of ASUS and show no signs of getting further. I went outside and continued on another work that does not need a computer, thinking that if I ignored it it would be bit go further, but I came back hours later to find that it is always locked.
    Well after a little, I took the plug my external hard drive, and he continued to start where he left off, like nothing had happened.
    This settled this possibility, but before that, I had established a thing; I need to connect my external hard drive before starting, otherwise it wouldn't connect properly.
    When I managed to finally get both going at the same time (Yes, after some persistence, he recognized the drive but I still would like a solution to this when it exists), I looked at the hard drive and all my files are corrupted or something. photos are not valid, some files that I know to have files in appear them as empty and I can't make any sense at all. Is there someone out there who has had this problem before and fixed, and if so, how?
    My external hard drive is a Seagate 1 TB, if it helps.
    I really want an answer to this, I have data on that disc that I need and I'm not.

    If the problem affects only one PC it says its something specific to this PC.

    Is there traces of yellow warning in Device Manager?

    At whatever it is updated / installed on this PC before this problem, or run a maintenance utility?

    If there is no warning of the Device Manager, then if you perform a clean boot PC http://support.microsoft.com/kb/331796 NB this isn't the manual method the Fixit which helps?

  • My Dell all-in-one printer does not print from the new hard drive installed

    I reinstalled the printer from the drive home, but when I ask it to print it says that it is not implemented. It will copy but not print. I also tried repairing the system, and it is said that it does not find anything wrong.

    tcarter015,

    Have you installed the desktop system utility / portable and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the Correct order. If there is a Dell computer. If a non - computer Dell, the chipset drivers still need to be installed first.

    Dell inkjet printer?

    What program anti-virus and firewall are you using?

    Rick

  • Windows 7 pro says that my activation is not valid after the new hard drive.

    Diagnostic report (1.9.0019.0):
    -----------------------------------------
    Given WGA-->
    Validation status: invalid license
    Validation code: 50

    Cached Validation code: n/a, hr = 0xc004f012
    Windows product key: *-* - M3DJT - 4J3WC-733WD
    The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
    Windows product ID: 00371-OEM-8992671-00524
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7600.2.00010100.0.0.048
    ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
    Admin: Yes
    TestCab: 0x0
    WGA Version: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7600.win7_rtm. 090713 1255
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7600.16385

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
    Installation ID: 006123886611989160227626608456521816115195059822524626
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 733WD
    License status: Notification
    Reason for the notification: 0xC004F057.
    Remaining Windows rearm count: 3
    Trust time: 04/12/2015-18:47:01

    Windows Activation Technologies-->
    HrOffline: n/a
    HrOnline: n/a
    Beyond: n/a
    Event time stamp: n/a
    WAT Activex: registered
    WAT administration service: registered

    --> HWID data
    Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    ALASKA APIC HAS M I
    FACP ALASKA A M I
    HPET ALASKA A M I
    ALASKA MCFG A M I
    FPDT ALASKA A M I
    ADELINE ALASKA A M I
    SSDT AMD POWERNOW

    Diagnostic report (1.9.0019.0):
    -----------------------------------------
    Given WGA-->
    Validation status: invalid license
    Validation code: 50

    Cached Validation code: n/a, hr = 0xc004f012
    Windows product key: *-* - M3DJT - 4J3WC-733WD
    The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
    Windows product ID: 00371-OEM-8992671-00524
    Windows product ID type: 2
    Windows license Type: OEM SLP
    The Windows OS version: 6.1.7600.2.00010100.0.0.048
    ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
    Admin: Yes
    TestCab: 0x0
    WGA Version: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Professional
    Architecture: 0 x 00000009
    Build lab: 7600.win7_rtm. 090713 1255
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7600.16385

    Name: Windows 7 Professional edition
    Description: operating system Windows - Windows (r) 7, channel OEM_SLP
    Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
    Installation ID: 006123886611989160227626608456521816115195059822524626
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 733WD
    License status: Notification
    Reason for the notification: 0xC004F057.
    Remaining Windows rearm count: 3
    Trust time: 04/12/2015-18:47:01

    Windows Activation Technologies-->
    HrOffline: n/a
    HrOnline: n/a
    Beyond: n/a
    Event time stamp: n/a
    WAT Activex: registered
    WAT administration service: registered

    --> HWID data
    Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    ALASKA APIC HAS M I
    FACP ALASKA A M I
    HPET ALASKA A M I
    ALASKA MCFG A M I
    FPDT ALASKA A M I
    ADELINE ALASKA A M I
    SSDT AMD POWERNOW

    The type of key and partial media product indicates that you have used a reinstall drive (or other media) that was produced by Dell for a Dell computer.  Your motherboard reports himself can be made by Gigabyte Technology, (which would not arise a Dell system).  The BIOS does not have the required for activation OEM SLIC input.

    You must change the key non - SLP product key, as in a detail (product complete package), selling retail or OEM system builder version of Windows 7 upgrade.  for example the COA/sticky label that came with the computer or the installation media of Windows 7 and then try to activate online or by phone.

    If you used a modded BIOS of third party who attempted to add the string SLIC 2.1 for a motherboard that is not made by a royalty OEM (which Microsoft believes that a form of hacking), then the BIOS mod has not done correctly.

  • Satellite L655-149: recovery does not work with the new HARD drive

    Satellite L655-149

    PSK1JE

    Windows 7 Home Premium 64-bit (factory installed)

    Recovery of HARD drive on drive D (factory installed)

    My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

    I created USB Flash HARD drive recovery.
    When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

    I've updated the bios
    I loaded by default in the bios
    I changed the SATA AHCI mode to compatibility IDLE

    assistance in this regard will be highly appreciated

    Set the BIOS to the default settings and try again.

    With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

    By the way: do you use that stick of recovery for the first time?

  • Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

    Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

    Original title: recovery problem

    Hello

    According to the HP Support Forums, this error may be to do with the hard or for other reasons.

    You never have it replaced with a no HP bought in car?

    Read these threads HP on your error code:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

    http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

    If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

    See you soon...

Maybe you are looking for