Pavilion dm4 2191us: restoring a backup made with HP Recovery Manager - data recovery manager has since been removed

My system (portable Pavilion dm4, Win 7 Home Premium x 64)) is works well but I would like to restore a backup of data made with HP Recovery Manager. HP Recovery Manager has since been removed from the system and I don't have a recovery disk. I tried to install sp45415 that supposedly runs a silent installation for the Recovery Manager program, but it fails silently on my system. The notes say that it applies to Windows 7 computers and the Pavilion dm1 and dm3. There is no mention of the dm4.

Y at - there a trick to getting sp45415 to work properly?

Y at - it somewhere that I can download an installation package for HP Recovery Manager that works on the Pavilion dm4?

Is there another tool that can restore the backup made by HP Recovery Manager?

Thank you!

If you have uninstalled Recovery Manager he probably removed the recovery of files in the recovery partition. When these files are not deleted download Recovery Manager will install. You will need a recovery media to boot from to restore the files and the recovery partition. If you do not have a recovery media you order from HP.

As for the files you are trying to restore - if it's a backup of personal files, photos, etc. to the outside hard disk or DVD must be a file .exe inside these files, probably of Restore.exe or Recover.exe. Double click on the .exe will extract files to a folder on the hard drive of your laptop.

Tags: Notebooks

Similar Questions

  • Pavilion dm4-2191us cell phone: no network after reinstall win7

    Hi Paul_Tikkanen,

    I found the following hardware ID

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

    If you or soemone could help me with the correct wirelss on this laptop card so that I can download the drivers, who will be highly appreciated.

    Laptop: Portable Pavilion dm4-2191us

    S/N: [personal information]

    Thank you very much

    You are the very welcome.

    I you have given only one because it is more recent than the one on the support page of dm4-2191us.

  • HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

    My HP Pavilion dv6-6c29wm recover disc that was made with HP recovery Manager

    Windows 7 64 - Bit on 650 GB of disk.

    Error: "the system support does not support this computer. You are not able to restore the system with the media. »

    I'm about to order the recovery disks from HP and with a bit of luck, being able to bring this notebook to conditioning factory with all the correct partitions and sizes, after that I have format the hard drive.

    Yes, our recovery disks will return your device to factory State. All the software that came with the unit will be resettled. What you have added, you have to reinstall.

  • I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

    WHS backup

    You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

    Hello

    Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

  • HP Pavilion dm4-2191us SATA II or III?

    Hi, I have a HP Pavilion dm4-2191us and I am interested in upgrading the hard drive. I looked for the SATA technology (II or III, I guess), but everything on the site just says HP Web "SATA". Does anyone know that this laptop uses the SATA technology? Thank you.

    Hello:

    This is certainly the SATA II. Don't know to make it SATA III.

    You can download and install this free utility and it will tell you what your HARD disk controller sata is rate, among other interesting things.

    http://PC-Wizard.en.softonic.com/

    Paul

  • Pavilion dm4 2191us touchpad scroll

    I just bought the Pavilion dm4 2191us d - the touchpad does NOT SCROLL, I updated the bios, I've updated the touchpad driver and nothing works - I don't want to send the machine back due to the touchpad but grow more and more frustrated - please help!

    For HP pavilion dm4 2191us - only is not safe for other models!

    OK found! so you have to uninstall and reinstall the ALPS POINTING DEVICE - make sure that the other is not installed synpetic or other (don't remember the name) so the only way I could find the device was looking for the word "pointer" and clicked on "Change mouse" or something then you will find some features of this device, where you can activate the option of scrolling - Phew! Why in the world that is not enabled manufacturing, affecting only GOD knows! -HP cruel joke!

  • Pavilion DM4-2191us / DVD SuperMulti burner

    Driver DVD (DVD SuperMulti burner) on a Pavilion DM4-2191us read and burn CD & dvd?

    Hello

    Yes, he does.

    Kind regards

    DP - K

  • None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

    None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

    What is your system brand and model?

    What is your Version of XP and the Service Pack?
    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
    What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
    Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

    For example, if you use Norton/Symantec products, you will see a message like this:
    Restoration incomplete. Your computer cannot be restored...
    It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
    According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
    Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
    System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
    That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
    Give these ideas some consideration if they apply to you.
    Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
    No matter what you use for protection against malware, I do so and then only begin to solve any problems:
    Download, install, update and do a full scan with these free malware detection programs can solve any problems:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    It can be uninstalled later if you wish.

    The scans by operating clean, reboot, test and we can fix any other issues

  • is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

    is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?

    I m edition trailer of friends, but the very first version is not fully updated, so it does not recognize the project... Is it possible to fix this?

    There is no way to go "in time" and do older versions of body include the latest versions of the project file format.

    Sorting is to get your current version.

  • A backup made with "Backup And Restore" on xperia z2 cannot be downloaded to a synchronization service?

    I backed up my xperia messages, contacts and more... (checked eveything) in "Backup And Restore" application and I chose to go back to my sd card. Now, when I go to the command file and look for the back up, I can't find (the file is that contains all the data that I saved), also it is not present in my memory. The reason why I want to find is that I want to upload to syncing like Dropbox or Mega service, because it takes so much space on my sd card.

    I tried to find the backup also file to manage the files from the device to the computer, but it is not found, and if I browse the application backup and restore on my xperia, I see that I can restore the backup that I did.

    However, is it possible that I can download the backup that I did with backup and restore application on my xperia to a synchronization service?

    @uliwooly @Alam1998

    I have passed this:

    https://talk.sonymobile.com/T5/Xperia-Z5-Z5-compact-Z5-premium/online-backup/m-p/1082198#U1082198

    Maybe when I get information I can update this thread too.

    EDIT: The solution can be found in the link above.

  • Can I restore a backup made using Windows OneCare Backup now that it has been discontinued?

    I am running Windows Vista and need to restore files from a backup made using Windows OneCare backup before it was abandoned.  Is it possible to do this?

    http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads

    Windows Live OneCare Backup and restore

    They will help you with this question in the Forum in question above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

    Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

    I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

    My computer is old - 1 year and 25 days to 25 days outside the warranty period.

    Thank you.

    Hello

    Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

    Bootrec.exe

    bcdedit/export C:\BCD_Backup

    c:

    Boot CD

    BCD attrib s h - r

    Ren c:\boot\bcd BCD.old

    Bootrec /RebuildBcd

    Bootrec /fixmbr

    Bootrec /fixboot

    Remove the rescue CD and try to restart now.

    Kind regards

    DP - K

  • Digitally sign is gray in CD player unless the document has been saved with Reader Extended PDF - option activate more tools in Acrobat. Is the feature to sign without options Reader Extended broken or has it been removed?

    If we just save a PDF document, users with CD Player cannot sign because the option "digitally sign" in the upper part of the certificates bar is grayed out. According to other information that I read, the ability to sign with earlier versions of the player requires the PDF file to be registered as a Reader Extended PDF with the option enable the tools more. If I save the document in this way, our DC users can sign it. We took the latest version (2015.008.20082). This feature - the ability to fill/sign a regular document (no Reader Extended PDF) - has been removed in later versions, or is it a bug that was not shown or even fixed?

    You can use fill & sign on documents without the form fields.

  • How to restore a backup made via the Dell USB key Solution?

    I have a backup on an external disk created with the Dell USB key Solution and takes the name 05-01-2012_135210_Backup and looks like this:

    Directory of E:\05-01-2012_135210_Backup
    05/01/2012 17:21

    .
    05/01/2012 17:21 ...
    05/01/2012 17:21 APPS. INP
    05/01/2012 APPS_0000.INP 942 17:21
    05/01/2012 APPS_0001.INP 1 449 984 17:21
    05/01/2012 17:21 3 713 788 DATA. INP
    05/01/2012 17:21 949 160 DATA_0000.INP
    05/01/2012 16:59 DATA_0001.INP 650,996,224
    05/01/2012 17:00 DATA_0002.INP 650,377,728
    05/01/2012 DATA_0003.INP 650,780,672 17:01
    05/01/2012 DATA_0004.INP 650,156,544 17:01
    05/01/2012 DATA_0005.INP 650,135,040 17:02
    05/01/2012 17:03 DATA_0006.INP 650,592,768
    05/01/2012 17:03 DATA_0007.INP 650,867,200
    05/01/2012 DATA_0008.INP 650,413,568 17:04
    05/01/2012 DATA_0009.INP 650,225,152 17:05
    05/01/2012 DATA_0010.INP 650,678,272 17:05
    05/01/2012 17:06 DATA_0011.INP 651,130,880
    05/01/2012 17:07 DATA_0012.INP 650,716,160
    05/01/2012 DATA_0013.INP 650,323,968 17:08
    05/01/2012 DATA_0014.INP 650,544,640 17:08
    05/01/2012 17:09 DATA_0015.INP 650,903,552
    05/01/2012 DATA_0016.INP 650,121,728 17:10
    05/01/2012 DATA_0017.INP 650,273,280 17:11
    05/01/2012 DATA_0018.INP 650,703,872 17:12
    05/01/2012 DATA_0019.INP 650,381,824 17:13
    05/01/2012 DATA_0020.INP 650,613,248 17:13
    05/01/2012 DATA_0021.INP 650,506,752 17:14
    05/01/2012 DATA_0022.INP 650,527,744 17:15
    05/01/2012 DATA_0023.INP 650,539,008 17:15
    05/01/2012 DATA_0024.INP 650,273,792 17:16
    05/01/2012 DATA_0025.INP 650,347,520 17:17
    05/01/2012 DATA_0026.INP 651,014,656 17:17
    05/01/2012 DATA_0027.INP 650,540,544 17:18
    05/01/2012 DATA_0028.INP 478,608,896 17:21
    05/01/2012 include.xml 2 281 350 17:21
    05/01/2012 migr.xml 1 330 286 17:21
    35 file (s) on 18,053,022,754 bytes
    2 dir 607,587,577,856 bytes free

    I was not able to complete the full implementation of the solution Dell Direct USB key due to various problems.  .    Dell ended up sending me a new Windows 7 HARD disk image.   I have now the laptop up and running again with Windows 7 and have various applications installed.   That's all pretty well.  But now how do I get my data files restored?   Basically, I want to connect the external drive to backup and complete step 19 of the solution, as described below.

    
    Here are the steps OS using the Dell USB key: 
    
    1. Boot from the Direct USB Key by tapping F12 at the Dell logo, then select the
    USB Memory Key option from the boot device menu. 
    
    2. Accept the Dell End User License Agreement (EULA) by clicking the box next to
    Accept, scroll down till the end of the license agreement and then click on
    continue. 
    
    3. On this screen, the usb key gives an overview of the process it is about to
    perform, click continue when ready to proceed. 
    
    4. The Smart Repair solution runs a surface scan on the system to identify any
    errors with the boot record or the startup files. If any errors are found, they
    are automatically corrected. 
    
    5. Once the process completes, there will be an analysis summary, in this case,
    there is no issue found by the smart repair, click continue. 
    
    6. In this window the user can select what data they would like to back up, they
    can either go with the default backup solution or they can click select more to
    select more files for backup, click continue after selecting files for backup. 
    
    7. If user clicks on select more, they will get the screen below, they can go
    ahead and select the necessary data for backup by checking the box next to the
    respective folder, sub-directories are selected by default once the root folder
    is selected. 
    
    8. The user will be prompted to attach a USB hard drive to the system, user
    needs to connect the USB Hard drive at this point and click continue. 
    
    9. Once the solution detects the USB hard drive , it goes ahead with file
    backup. 
    
    10. Once the files are backed up, the solution will back up the user personal
    settings. 
    
    11. The Direct USB Key displays a summary of the data and personal settings
    backup. Click continue. 
    
    12. The Direct USB key then proceeds to install the operating system image on
    the system. 
    
    13. Once the operating system image is transferred, the drivers are also
    transferred. 
    
    14. After the operating system image and driver transfer, a summary page comes
    up giving the user information as to what process was performed successfully and
    what failed. The user needs to remove the USB key at this point and click
    restart. 
    
    15. The system restarts and comes to a flash screen on recovery and restore. 
    
    16. After the flash screen, the applications start installing. 
    
    17. Once the applications are installed, the user would see a summary screen
    informing them that the Operating system has been restored, connect the Direct
    USB Key and click restart. 
    
    18. After the restart the user will be prompted to connect the data backup hard
    drive and then click continue. 
    
    19. The files and personal settings are then restored from the USB backup drive. 
    
    20. After the files are transferred the system comes to the desktop with a pop
    up window informing the user to check the device manager for any exclamation
    marks, the tool also guides the user to download the drivers from the support
    site and the applications from My Dell Downloads and Dell Digital Delivery. User
    needs to select the check box to prevent the message from being displayed again
    and click close. 
    
    =============================================
    
    What program/utility can be used to run step 19  to restore my data?
    
    Thanks in advance!
    
    			 

    The Windows Migration utility (MigRestore) was obtained from Dell, decompressed and Support execution of data taken with the backup restore.

  • How can I delete old backups made with backup?

    The software that I use at home for backup allows me to program it so that I keep only full backups n.  It deletes the oldest backup automatically performed after the backup complete n + 1.

    At work, I have to use the backup utility that comes with XP Pro.  I was unable to find a way to delete older backups even manually.  As a result, my backup disk is almost full.  Although I really like the automatic deletion that makes my home software, I would be perfectly happy if I could manually delete any backups older than the nth backup complete.

    Is there somehow in the backup utility to remove these old backups?  If Yes, can someone describe how make it?  Thank you.

    Hi tochjo,

    NTBACKUP does NOT contain functionality to do this automatically.

    If you are looking for *. The BKF files and sort by date. Subsequently, remove files from your computer.

    Hope the helps of information.
    Please post back and we do know.

Maybe you are looking for

  • Why is forgetful of Parental control?

    Why Parental controls (often, not always) forget and do not take account of my settings? I have, for example, deselected some apps, but when my daughter logs in to his account on our MBP she gains unfettered access. Is there a sequence in which the p

  • How can I control what applications run at Start Up?

    I have a number of applications running and eating memory that I don't know what they are, or if I don't know what they are, I don't want to work when I start the computer.

  • How to install an audio output device

    The sound was coming out the speakers tour earlier today. When I tried to plug in a pair of high office speakers, I couldn't not all sounds on their part at all. Speakers were plugged into a power outlet and worked, the green light was on which indic

  • Cisco ASA5505 Gigabit?

    Hi all Checked the POST on an ASA5505 (9.1 (3)) one it shows 2 Gigabit NIC: Total network cards found: 10 88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002 88E6095 rev 2 Ethernet @ index 08 MAC: 885a.92d9.f938 88E6095 rev 2 Ethernet @ ind

  • Cursor blackBerry Smartphones and video problems

    Hello I can't control my cursor or video games.  Is this one problem for others?  I am trying to decide if I would return my Storm because of these problems. Thanks, Liz