Pavilion dv4: problem in installing drivers

Similar Questions

• HP Pavilion DV4-1225dx remote control drivers

  I have a HP Pavilion DV4-1225dx, I bought at bestbuy and I am running windows 7 64 bit, I was wondering if there was drivers availible for remote control of my laptop, I would prefer not having to install the whole suite of HP, but I'd do it if it means I could make it work I used 64-bit drivers for vista for the rest of the machine and they all worked perfectly, but for remote control Setup crashes my whole upward machine when I try to start it, if anyone has any ideas?

  Try this driver.

• HP Pavilion dv4 problem of disk controller!

  Hello, I have a Core i5 Pavilion dv4, wich is recently have frozen, and then a BSOD appears with stop 0x000000F4. I checked for software issues, but everything is normal. I ran the memory and the disk self-test with results 03F0 in two tests.

  I noticed that when I do the computer work stronger than normal (e.g. a 6 GB on an external disk file copy), or as when installing Adobe Master Collection CS5, the computer freezes at a part of the installation and then the HARD drive is not recognized by the BIOS, so I have to on your computer (then turn on turn off).

  After X times to get the same question, I look for the events in the event viewer, I get only an event source 'Disk', with the comment «the driver detected a controller on \Device\Harddisk error...» "blah blah blah... This event is coded: 11.

  What could be?

  I also have a problem with the WebCam, it is not recognized by the software.

  Help! Please...

  $ $ DJ-JaaM

  Hello

  03F0 is a failure of the bios hard disk test, you may well need to replace.

  It may be useful to check the following running.  Click on the Start Menu, computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Part of this process will require a reboot to check the disk.  After the restart, as Windows checks the HARD disk, keep a watch for the number of defective sectors found.

  Kind regards

  DP - K

• Problems after installing drivers.

  For a long time, I had a same problem installing drivers.  I finally got out it was because I have my program files all together for my E drive (my C drive is a smaller SSD).  I made the necessary changes to my system to allow the drivers to be installed on the C drive.  After installation I copied the entire tree on my E drive and changed my system to install on E.

  Since that every time I try to print I am told that the printer is offline.  I can't open the scanner either.  Windows find the printer successfully, and I'm able to do things like check my ink level.  I can not print correctly on other computers on my network so I know the printer is fine.

  The printer in question is a Photosmart HP 6510, computers are all windows 7 and connections are all wireless.

  I am sure that the problem is the way I have all my files on my E drive program and not my C drive at 90%.  The ideal solution would be for the HP Installer to assume not only that I want things on C, but I don't see that changing at any time soon.  Anyone with advice on how it works?

  Hello JPadilla,

  I set up a laboratory and recreated the error code that you receive when you try to change the drive in which the software is installed to. I'm able to successfully download, extract and install the HP software on my E: drive by following the steps below:

  1. Please make sure that there is no HP printing software installed on your C: drive, even if it's just the basic print drivers go ahead and remove them.

  2. clear your temp folder on the C: drive: click on your Start Menu in the search box type %temp% and delete the files.

  3. Please make sure you back up your registry before proceeding to #4.

  4. has created a folder on your D: drive and name it 'Test'.

  5. click on your Start Menu and search for "regedit", once you are in the follow-up record this way:

  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > current Version

  6. now that you are in the registry, I need you to right click on the following files and select Edit and change your:

  ProgramFilesDir to D:\Test

  ProgramFilesDir (x 86) to D:Test (x 86)

  ProgramFilesPath to Test %

  ProgramW6432Dir to D:\Test

  7. now, we can go ahead and download the drivers and full software features. Once you have clicked on the download, select Save as using the drop-down arrow and select computer and select your E: drive, click Open, and then save. Once downloaded go ahead and select RUN.

  You should now be able to install on your E: drive, as stated previously I managed to clear the error and changing the drive in which the software was the installation by following the directions above.

  Please keep me updated and I would like to know if it is a resolution that is successful for you or if you need more help, I'd be happy to help you.

  Thank you very much

• Pavilion G6-2005ax, cannot install drivers wireless and bluetooth problem.

  Hello, I installed windows 7 ultimate 64-bit on my HP Pavilion G6 2005ax after formatting. I downloaded and installed all my drivers from here . But '2011 Ralink 802.11 b/g/n WiFi Adapter "and"Ralink 802.11 b/g/n Wireless LAN Adapter Driver "doesn't install. There are yellow symbol on "Network controllers" in Device Manager. I could succcessfully install the bluetooth driver but I can't find any device, or it gets discovered. Please help someone. Thank you.

  Hello:

  Depending on the hardware ID will keep you (USB\VID_0CF3 & PID_311D & REV_0001), that decodes an Atheros bluetooth radio.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-101447-1&mode=3

  Paul

• Problem in installing drivers Sound and Bluetooth in a Satellite A100-712

  Hello everyone

  I have formatted the hard drive of my laptop Toshiba Satellite A100-712, downloaded the sound and drivers BT of this amazing site.

  But there is still a problem.
  In Device Manager, there are yellow signs with the realtek drivers and bt. I don't know what to do?

  Please, you can list the steps for a correct installation for these drivers?
  BCZ I'm crazy... :(
  Thank you

  Hello

  First question: why you n t use the Toshiba Recovery CD?
  This CD contains all the drivers, tools and utilities, and you do not have to install any drivers separately

  Secondly: The Toshiba driver page, you should find the installation instructions document
  Just follow the order of installation mentioned in the txt file and everything should work!

  PS: Don't forget to use the right drivers. I think that the A100-712 is outside the PSAA9E series

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Problems after installing drivers for HP Photosmart 5510e

  I was helping my sister set up his new printer HP Photosmart 5510e on a laptop that has Windows 7 64 bit.  She was not wearing the disc so had to download the drivers from the HP website.  Since she has downloaded the drivers, the computer not giving him stop, go to the Task Manager, or do much. I have check that she went to the site of HPs.  Has anyone else had problems with their computersw after installing the drivers?  I don't know what to do.

  Thank you
  Carla

  Hi Cmcgaw,

  Follow the steps below to completely remove the HP software. Let me know if you still have problems with the laptop after uninstalling the software?

  1. type % temp % in run

  2. look for a folder called 7z? Example: 7zS6D6F, and then open it.

  3. open the contents of the file Util

  4. open the folder titled CCC

  5. If you have an HP computer, run L3uninstall.bat. If your computer is not HP, then run the L4uninstall.bat

  6. once the uninstaller cleaning brush is finished, restart the computer.

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Drivers Windows XP for HP Pavilion dv4 - 1228ca

  I would be grateful if you could direct me to the drivers Windows XP for HP Pavilion dv4 - 1228ca.

  Thank you

  MS-UAA for SP2 (required with a reboot before Audio, Modem and ATI HDMI Audio) here

  MS-UAA for SP3 (necessary for a restart before Audio, Modem and ATI HDMI Audio) here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41698, vista, work reported in here XP driver

  2 sp41693, pilot, work reported in XP here view

  3 SP39671, driver, jobs reported in XP here or here view

  4. find your audio driver Vista on this DVD where you burned C:\Swsetup folder. It can also work under XP.

  When you install a sound driver with checking the success is your sound work.

  If there is no sound after reboot check this thread. There is information how to fix this problem.

  High-Definition Audio (HDA) Modem Installer and driver here

  ATI HDMI Audio here

  HP Quick Launch buttons here

  Atheros Wireless here

  or

  Broadcom wireless here

  Realtek RTL8102E Family PCI - E Fast Ethernet here

  ALPS Touchpad here

  ENE CIR Receiver here (your Vista driver)

  JMB38X card reader here 

  HP 3D DriveGuard 1.10 was here

  If you had for 7 unknown devices (buttons drivers), here (new link)

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices.

  Message edited by Daniel_Potyrala on 12/09/2009 15:53

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• Cannot install driver for hp pavilion dv4-2045dx cd player

  Computer: HP Pavilion dv4 2045dx using Windows 7 (64-bit)

  I currently have problems with my computer's CD drive.  He has been unable to read discs of any kind of music, DVDS and software programs for several months now.  The main problem seems to be with an inability to properly install the driver for the cd drive.

  When running "find and solve the problems" of section "Troubleshooting" in the Control Panel, I get an error message that says that there is a problem with the driver for the cd drive.  Whenever I try to install the driver, he is not able to do so and contact the manufacturer of your computer.  I also tried to download all the updates and I get essentially the same message.

  Also, here's all that I've done so far.  I followed all these steps, but the last two listed in the help or support of the site.  Here is the link I used:

  http://support.HP.com/us-en/document/c01897812

  I couldn't do a restore of the system in step 7, because the last date that I could find to a restore point has been today (or yesterday).  In addition, I couldn't do step 8.

  Any help would be greatly appreciated.

  Thank you

  Hello:

  See if ongoing automated microsoft fix tool for you works.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  If AutoCorrect does not work, try the manual fix in section "Let Me difficulty it myself, ' on the link below.

  Right to the title of this topic is a "click here to view the solution."

  http://support.Microsoft.com/kb/982116

• HP Pavilion dv6 3110ez: problem with video drivers

  Best regards to all,
  Can someone post a links to drivers for these graphics cards with switchable?
  I tried different drivers, and it does not work on Windows 8 Pro x 64
  and Windows 8.1 Pro x 64.

  The laptop is HP Pavilion Dv6 3110ez.

  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv6 Notebook PC
  BIOS: Default system BIOS

  Processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  Memory: RAM 6144MB

  **********************************************************
  It's the code of the ATI Mobility Radeon HD 5000 Series:
  ------------------------------------------------------
  Hardware ID:
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C & REV_00
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C
  PCI\VEN_1002 & DEV_68E0 & CC_030000
  PCI\VEN_1002 & DEV_68E0 & CC_0300

  Compatible IDs:
  PCI\VEN_1002 & DEV_68E0 & REV_00
  PCI\VEN_1002 & DEV_68E0
  PCI\VEN_1002 & CC_030000
  PCI\VEN_1002 & CC_0300
  PCI\VEN_1002
  PCI\CC_030000
  PCI\CC_0300
  **********************************************************
  **********************************************************
  It's the code of the integrated graphics card (Intel):
  --------------------------------------------------
  Hardware ID:
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C & REV_02
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C
  PCI\VEN_8086 & DEV_0046 & CC_030000
  PCI\VEN_8086 & DEV_0046 & CC_0300

  Compatible IDs:
  PCI\VEN_8086 & DEV_0046 & REV_02
  PCI\VEN_8086 & DEV_0046
  PCI VEN_8086 & CC_030000
  PCI\VEN_8086 & CC_0300
  PCI\VEN_8086
  PCI\CC_030000
  PCI\CC_0300

  **********************************************************
  **********************************************************

  I solved this problem with the drivers of AMD.  As there'are the drivers of this model of graphics card just for Windows 7 and not later versions of Windows, I just installed this driver in compatibility mode. All drivers for Windows 7 can be downloaded by following this link. Concerning

• Pavilion dv4: cannot install windows 8.1

  I installed windows 8.1, after installation on drive c. The PC reboots and start loading. But he remained at 8.1 windows logo. He drives half an hour. After saying the message "your PC ran into a problem needs to restart. What should I do? My PC information: pavilion dv4
  3 GB ram 32-bit.

  Hi @ismailbadhusha,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and problems with installing Windows 8.1. First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - has begun. Restart the computer after this stage and try to reinstall.

  Your system came with 64-bit Windows. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  If you have an error message could you let me know what it is.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Pavilion dv4: lack of drivers for Pavilion DV4 4141US

  I bought a Pavilion dv4 4141us in 2012, with Windows 7 Home Premium 64-bit. A few days ago I wiped the Windows 7 Ultimate 64 bit computer laptop clean and installed, and currently I'm missing 5 drivers:

  1. base system device

  2 BCM20702AO

  3. Ethernet controller

  4. network controller

  5 unknown Device

  Product: QE010UA

  Hardware ID device Base system:

  PCI\VEN_197B & DEV_2392 & SUBSYS_3585103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_358510C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  For network controller hardware ID:

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C & REV_01

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1795103C

  PCI\VEN_14E4 & DEV_4727 & CC_028000

  PCI\VEN_14E4 & DEV_4727 & CC_0280

  For the unknown device hardware ID:

  ACPI\HPQ0004

  * HPQ0004

  Thank you

  LastGREYwarden

  Hello:

  You need these drivers in the order that you posted the devices...

  Base system device:

  This package contains the driver that allows JMicron card reader in the notebook models that are running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp52809.exe

  BCM20702AO:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp54245.exe

  Ethernet controller:

  This package provides the driver Atheros local area network (LAN) that allows the chip of the Interface network (NIC) Atheros card in the notebook models that are running an operating system supported.

  File name: sp53699.exe

  Network controller:

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  Unknown device:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe