Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

I'm not about to spend all that money on a battery just to know that it is not the battery.

Hello

If you have the 64 bit rescue CD, you would have received an error if it was bad.

Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

Bootrec.exe

bcdedit/export C:\BCD_Backup

c:

Boot CD

BCD attrib s h - r

Ren c:\boot\bcd BCD.old

Bootrec /RebuildBcd

Bootrec /fixmbr

Bootrec /fixboot

Remove the rescue CD and try to restart now.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Windows Vista does not start. I can just buy the upgrade to Windows 7 to fix this or do I have to purchase the full version of Windows 7?

    update helps... Difficulty helps lol

    I have vista Home premium, but does not start it tells me to put my disk installation and repair process. can I buy windows7 upgrade or should I buy the full version, I'm not going to do...? I got my pc checked thourghly and everything is running perfect

    Please use the Vista system repair and recovery forum to fix your departure upward.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

    Yes, as long as Vista is still installed on the hard drive you can use a copy of Windows 7 upgrade to upgrade your computer but you will need to boot the computer with the Windows 7 dvd and perform a custom installation.  Which will remove all your programs and data so there will be very practical backups.

    The best option is to repair Vista first.

    Before dismiss you the idea of buying a copy of the full license of Windows 7, remember that it would be transferable to a new computer much more easily that an upgrade copy is.

  • Windows Defender does not turn and I can't access it. I get the error Code is 0x800106ba. What does this error code mean?

    I can't turn on Windows Defender, nor can I open it upwards. The error code that is displayed is 0x8800106ba. What does this code mean?

    Hi, tonytiger34.

    The usual solution to this error is to make sure that the service is automatic. Oferror message when you run Windows Defender: 'Error 0x800106ba Code' :

    "To resolve this issue, follow these steps:

    1. Set the Windows Defender service on Automatic rather than Manual or disabled . To do this, follow these steps:

      1. Click Start

        The collapse of this image enlarge this image

        type services in the Start Search box, and then clickServices in the programs list.

        The collapse of this image enlarge this image

        If you are prompted for an administrator password or for confirmation, type your password or clickcontinue .

      2. Double-click the Windows Defender service and then in the Startup type box, clickAutomatic .
      3. Click OK . »

    If the automatic commissioning does not resolve the problem, try reinstalling Windows Defender.  Note, however, if you have installed Microsoft Security Essentials, Windows Defender disabled installation because MSE includes anti-spyware protection.

    Additional steps are available in the article referenced in the Knowledge Base.  Please let us know how make you out.

    Corrine, Microsoft MVP (consumer security)
    My Blog: Security garden

    This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

  • my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

    my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

    Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

    If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

  • my windows firewall does not start and I get a erroe code 5, can someone help me

    my windows firewall does not start and I get a erroe code 5, can someone help me

    Hello

    1. What is the brand and model of the computer?

    2. what security software is installed on the computer?

    3. have you made changes on the computer recently?

    Method 1.

    To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

    Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

    Method 2.

    Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    I hope this helps.

  • Creative cloud does not start and I can't re - install

    I had problems with creative cloud, it does not start and I can't uninstall it because a prompt appears telling me I can't uninstall it because the programs use. I really need to get the latest update for Illustrator, because it also crashes without reason.

    Help

    Hi tsumera,

    Try to uninstall the application office creative cloud through the cleaning tool

    If that doesn't help, please try the following steps to completely uninstall the creative cloud.

    Remove the OOBE and AAMUpdater folders.

    Mac OS:

    1 leave the creative Cloud Desktop application

    2 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

    3. navigate to \User\\Library\Application Support\Adobe *.

    And/Library/Application Support / Adobe *.

    To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 and later.

    4. search and delete the files AAMUpdater and OOBE

    5 / Library/Application Support/Adobe (rename Adobe Application Manager and Adobe of joint office)

    6. go > utilities > (rename Adobe Application Manager and creative cloud)

    7 re - download creative-cloud

    https://helpx.Adobe.com/creative-cloud/help/install-apps.html

    Windows:

    1. Exit creative Cloud Desktop
    2. Force quit Adobe all processes from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
    3. Go to \Users\AppData\Local\Adobe\

    And C:\Program Files (x 86) \Common Files\Adobe

    C:\ProgramData\Adobe

    1. To view the AppData folder and program hidden data, see files, folders, file name extensions. Windows XP, Vista, Windows 7.
    2. Find and delete the files AAMUpdate and OOBE
    3. Download creative-cloud

    https://helpx.Adobe.com/creative-cloud/help/install-apps.html

  • My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

    Original title: can you help me?

    My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

    My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

    You in fact 2 questions.
    I will answer the one who is the most important, for you it is.

    RE: Change startup programs

    You can access this way startup programs...

    Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
    To disable, uncheck the box in front

    To activate... check the box opposite.

    RE: Windows Defender cannot be found.

    If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
    Bottom line: it's ok. It's normal.
    List of AVs which will stop Windows Defender:
    Norton
    McAfee
    AVG
    Microsoft Security Essentials

    If you don't have AV programs above, here's how to restart Windows Defender:

    Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows Defender > click Properties >
    in Startup Type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.
  • My CD/DVD on computer does not work and I can't update the Office XP Service Pack 3. Microsoft can do for me?

    The CD/DVD on my computer does not work and I can't update the Office XP Service Pack 3.  Microsoft can do for me?

    Hi Nancy,.

    I suggest you provide more details as to how the problem came to be or how and when it happens. There are many experts here, but you must give specific details
    See you soon ~
  • I have the Free AdAware from Lavasoft and suddenly it does not start and I can't remove it or re-insatll it; all solutions?

    All of a sudden my free AdAware spyware program does not start. I can't delete AdAware from the control panel or reinstall from the Web of Lavasoft site... There are some missing component installer. WHAT HAS HAPPENED, HOW CAN I REMOVE IT?

    Hi BobRullo,

    If you have installed the AdAware software recently, try to do a system restore that will repair return the computer to the point while it was working fine. Then, try to install the software.

    How to restore Windows XP to a previous state

    You can also ask your question in the Lavasoft forum for assistance.


    Reference:
    http://www.lavasoft.com/mylavasoft/support/faqs

    Hope the helps of information.

    Please post back and we do know.

  • Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

    original title: URGENT

    How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

    Hello

    for starters, the info you received a DVD of windows 7 repair vista usage are BAD

    you need a DVD vists or a vista Startup Repair disk repair vista

    and you can NOT do a repair installation of booting from a DVD in vista

    Repair facilities are on within an operating system

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    If necessary

    Data recovery

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method depends on your hardware in the computer that failed

  • Wil Windows 7 does not start and is not able to solve the problem

    Hello

    I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

    When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

    I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
    At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

    Thank you

    > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

    This is a typical symptom for a faulty HARD drive.
    I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

    > At some point, the screen showed that there is a cable that is not connected or something.
    Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
    This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

    In my opinion, you need to change the HARD drive.
    I think this should solve the problem.

  • Windows Update does not start and other problems...

    When I connect to windows update, the page becomes white and everything continues to load.  I can't start in safe mode to run all the patches.  I also have an annoying problem of svchost that takes more than 90% of my memory.  I ran every virus known to man program... MalwareBytes, Kaspersky, ESET, to name a few and they all say that my computer is clean.  I am running windows xp pro service pack 3.

    Hi Bopatop,

    1. did you of recent changes on the computer?

    2. you receive an error message?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click on Start , then run.

    (b) type msconfig , and then click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    (d) when you are prompted, click restart to restart the computer.

    Also, check out the articles below and check if that helps.

    You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

    http://support.Microsoft.com/kb/927385

    A description of Svchost.exe in Windows XP Professional

    http://support.Microsoft.com/kb/314056

  • After a breakaway of electric failure does not start, or I can boot from the cd that the drivers won't load

    I get the logo and the system beep.  Seems to hang for about 2 minutes then tricking black screen reboot and select proper boot device or insert boot media in selected boot device and press a key.  When I insert the dvd-rom supplied with the pc recovery, it takes about 4 minutes for so-called load windows and off to install windows for me.  No matter what I select, I'm only able to download the drivers that may be defective and then find and I can retry or cancel.  If I try again once I get the same cycle but I can't get into windows, nor can I access any of the disk recovery tools.  I can't enter the Bios or any other file.  I tried power market and stop and start cold without result.  The pc was in hibernation because of non-use, but had been shut down when the crash occurred.  It is on a surge protector.  I could really use some help and appreciate suggestions - I'm a little computer but certainly not a tech guru.   Thanks for any help.

    Hello

    ·         What is the brand and model of the computer?

    ·         What exactly happens when you turn on the computer?

    ·         You get the error message?

    If you are not able to boot in the BIOS there is a problem with the hardware. I suggest you contact the computer hardware manufacturing for this problem.

    Also check out the link below and check if it helps:

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  • 12 c on the repository server management agent does not start due to a failure of the system

    My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

    @DBSERVER: (OEL6.5, x 86-64)

    -12 c Enterprise Manager Cloud Control (EMCC)

    -Database 11.2.0.4 which acts as a repository for 12 c EMCC

    Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

    VM12: (OEL6.5, x 86-64)

    -12 c Management Agent which monitors host and database (12.1.0.1)

    The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

    [orcl11204g@dbserver bin] $. / emctl start agent

    Oracle Enterprise Manager Cloud control 12 c Release 3

    Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

    Starting Agent... failed.

    Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

    See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

    [orcl11204g@dbserver bin] $

    The targets.xml file contains the following information, which do not seem to be of any help:

    [orcl11204g@dbserver emd] $ cat targets.xml

    <? XML version = "1.0"? >

    <>targets

    < / objectives >

    [orcl11204g@dbserver emd] $

    Anyone can provide assistance in such circumstances?

    The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

    --> $/ AGENT_INST/bin/emctl stop agent

    If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

    --> Move your existing target.xml file

    MV target.xml target.xml.old

    --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

    --> Start the agent of

    $AGENT_INST/bin/emctl start agent

    That starts agent but without all the targets in targets.xml

    To the discovery of targets saw agent console resynchronization

    Concerning

    Krishnan

  • When I open a new tab, my braces are not displayed, and I can't find the place with the 9 boxes of light it up, what do I do

    When I open a new tab, the page is empty, and I can't watch my braces. I tried to look for the box with 9 squares inside at the top of the screen to turn it back on, but it does not appear. How can I get my rear braces?

    Hello

    First go to Tools > > Options > > Privacy > > Firefox will change to not forget history, then go to Subject: config and search for browser.newtab.url change its value to on: newtab.

    Also:

Maybe you are looking for