Pavilion dv6-1216sa: Startup freezes after upgrade to Windows 10

Similar Questions

• HP Pavilion DV6: HP Pavilion DV6 Sleep transmit Mode after upgrade to Windows 10 (go to sleep after two minutes of inactivity)

  I recently updated my laptop from Windows 7 to Windows 10. The upgrade went smooth and everything seems to work fine except for one annoying problem. After approx. 2 min of inactivity my post laptop goes into sleep mode and disconnects me. I checked all my power settings settings settings/sleep/screen saver... etc and I finished all updates to windows. I do not see all timers anywhere that requires an adjustment. Any help would be appreciated.

  Note: The laptop wakes up fine with no problems.

  For those who are interested. I found the solution by activating the 'system unattended Sleep Timeout' and then by changing this day here. The timer seems to have a pre-selection of 2 min for some reason any that was causing the problem together.

• Problem with the hp pavilion dv6 2155ee wireless adapter after upgrading to Windows 7 Service Pack 1.

  Help me my wireless was working well and I have formatted my laptop windows 7 sp1 to windows 7 and I installed all the drivers and all

  work well only the Wireless does not and his permit and I can access the internet via cable (ethrnet) and when I troubleshoot say: problem
  with the wireless adapter or access point. Please help and thank you

  Thanks Nicolas and Hula, but Nicholas I told you my router works well I can access internet from another laptop and my mobile problem with my laptop however I formatted my laptop and I think that the problem was because I installed a driver that I can't install it and now my without wire is to find networks and I can access internet again however thanks for your help

• Pavilion DV6 6154 TX: Problems after update to windows 10

  I upgraded my OS from windows edition laptop home premium windows 10. Then, I am facing so many problems with OS (black screen, striking cursor before start up and bluetooth disabled and not able to update to the new version of Bluetooth).
  
  So I think going to the earlier version of windows, but I have some doubts in this regard. Please find me answers to the following questions.
  
  (1) if I come back to windows 7, will solve my problems?
  (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

  dabbada wrote:
  
  (1) if I come back to windows 7, will solve my problems?
  (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

  Hello

  Thanks for posting in the Forum from HP Support.

  REP 1) If you didn't have a problem with Windows 7 but only with Windows 10, probably the problems resolve and will not happen on Win 7. I can't guarantee 100% but it seems normal.

  REP 2) Yes, if you go back to your previous operating system (aka Win 7), you will be able to try to Win 10 later if you wish.

  A few tips:

  > > If you want to try to solve your problems of Windows 10 without going back to Win 7, you can try to download/install HP Support Assistant

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

  http://support.HP.com/us-en/document/c03467905

  Please, download it, it's about 39 MB, run it and update all the drivers and all of the HP software.

  Please, go to the control panel and make sure that your Windows is fully updated

  > > If this is not enough, here are the instructions how to return to Win 7 (they only work if you upgraded to Win 10 in the last 30 days):

  http://www.howtogeek.com/220723/how-to-uninstall-Windows-10-and-downgrade-to-Windows-7-or-8.1/

  http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

  Once you return to Win 7 and if you later decide to reinstall Win 10, note that the free update will be available until the fall of 2016. Here are the instructions how to upgrade to Windows 10 (please use the USB/ISO method) > > http://support.hp.com/us-en/document/c04730900

• Satellite U500 - freezes after upgrade to Windows 7

  Hello

  I'm trying to upgrade from Vista home premium 64-bit Windows 7 Home premium 64 bit on a U500-119.

  After completion of the activation process, I started Windows 7, but the screen not appear and my U500 froze the message 'welcome. ' I was able to restart Windows 7 in repair mode, but I can not find which sw component prevents Windows 7 start and work in normal mode. Used the incorrect installation option, process automated instead of the custom one?

  What should I do, restore Vista from recovery of HARD drive and re-install Windows 7, this time using the perconnalised mode?

  Hey

  To be honest, I also don t know what software driver is causing this gel, but you can start Notepad in safe mode?

  In addition it of not possible to use HARD drive recovery anymore because you have installed another OS. In this case, you have the Toshiba Recovery disk to restore Windows Vista.

• Video playback freezes after upgrade to Windows XP SP3

  Since your update to service pack 3 my look on Internet Explorer the TV started to freeze every few seconds, can you tell me why this is happening now. It was perfect before. Thank you

  My operating system is windows XP. My video card is NVIDIA

  Hello

  · What version of Internet Explore on the computer?

  · This happens when plying the video on a particular Web site?

  You can download and install the latest version of adobe flash player on your computer and check if it helps.

  Uninstall the previous version of Adobe. Link for reference: Uninstall Flash Player | Windows: http://kb2.adobe.com/cps/141/tn_14157.html

  Install the latest version from the following link: Adobe Flash Player Support Center: http://www.adobe.com/support/flashplayer/downloads.html

• Pavilion dv6 sd card reader does not work after upgrade to windows 8

  Hello

  My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

  Hi SanSam.

  Thank you.

  Install the driver from Realtek for Windows 8 card reader.

  Please post your results.

  Best regards
  ERICO

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Wireless button not work (orange rest) after upgradation from windows 8

  the orange wifi light does not change to white light after upgrade to windows 8 windows edition OS Home premium. I don't use the pavilion dv6-7011tx laptop, my product. is. B0P39PA #ACJ this is very frustrating as theres no wifi as well as bluetooth connectivity, the solution button wireless key doesn't help. HP guys please give a solution that we expect more than a month.

  If you open Device Manager (key Windows + X and select Device Manager) and see an unknown device with the following details as in the picture.  I had the same bad experience when I upgraded my Hp Envy17-3002ea loan last weekend.

  

  then download and install sp59720 should do the trick.

  Best regards

  ERICO

• After upgrading my Windows Vista computer to SP2 double my user account icons.

  Original title: After upgrading my Windows Vista computer to SP2 double my user account icons. I'm not trying to delete one of them, because all of the account will be deleted.  How can I fix it?

  I use a laptop Lenovo Dual 32-bit CPU. My OS is Windows Vista Business.

  Hello
   
  Where it seems double?
   
   
  Method 1:
  Step 1:
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
   
  If step 1 work, try step 2
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
   
  If the problem persists, you can uninstall service pack 2, put the computer in start state in minimum mode, and then reinstall Service Pack 2 and see if that helps.
   
  Step 1:
  
  Perform the system restore and go back to a date when Service pack was not installed on the computer.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Step 2: Put the computer in a clean boot state.
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Step 3: Download Windows Vista Service Pack 2 here:
  http://www.Microsoft.com/download/en/details.aspx?ID=16468

• Unknown device after upgrade from windows 7 to windows 8

  My laptop is a Pavilion m7 1015dx

  I just upgraded to windows 7 to windows 8 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\VEN_HPQ & DEV_6001
  ACPI\HPQ6001
  * HPQ6001

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Much appreciated!

  Hey thought I'd tell someone on the Microsoft Answers site found the driver. It is the wireless button driver.

  Here is a link for the driver:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  Here is a link to the MS Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/unknown-device-after-upgrading-to-Windows-8/e46bfb7a-70cb-42be-B21C-9b6688b68009?page=4&TM=1351432666168#LastReply

  Thanks for your help.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.