Pavilion dv6-2124el: problem with the volume key

Hello

I wanted to know if someone could help me with this question: I have just formatted my laptop and installed Win7 HP 64 bit computer and I can not anymore in order to visualize the volume HP bar on the screen. I tried to install HP Quick Play, quick launch buttons and touch fast, but it does not work. Maybe I installed wrong version? Maybe I missed another driver/software?

How can I solve this problem?

Thanks for reading it.

Hello

For your particular laptop volume on the display screen is provided by HP MediaSmart SmartMenu on the following link.  Note:  Make sure that you have installed at least 1 other MediaSmart software before installing this.

HP MediaSmart SmartMenu

After the installation is complete, restart the laptop.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

    Hi all

    My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

    summer giving a helping hand by making the upgrade.

    Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

    processor, it seemed to be good upgrade to improve the performance of the laptop.

    We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

    ( interview guide , page 108), and the seller assured us he tested the CPU on some different

    HP pavilion and it worked fine.

    But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

    on the front and the setting of the power and volume buttons would light up periodically. The screen was black

    All the time.

    Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

    and it starts fine.

    I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

    same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

    I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

    missed, or the problem elsewhere?

    Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

    on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

    Any help, advice or general guidelines as to what should be done would be really appreciated.

    Thank you for your attention.

    Hello:

    The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

    In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

  • Problems with the product key

    I have a mac book pro which has a partition with windows 7 pro (I SOUL, in the way that you need to restore the computer whenever you need to use the window). I installed fusion 3 for both systems without having to restart. I deleted the partition and tried to reinstalled the window. now, I have a problem with the product key, what can I do?

    Hi Lumareli,
     
    What is the error you get when you enter the product key?
     
    If you have difficulties to activate Windows 7, open the Windows Wizard of Activation in Windows 7 to use the phone and activate Windows:
     
    Try this and wait for a real person and explain what happened:

    a. Click Start, then in the Find box type slui.exe 4
    b. press enter on your keyboard.
    c. Select your country.
    d. Select the telephone activation option, then call and hold to a real person.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • I have problem with the escape key

    I have the problem with the ESC key... is sometimes from time to time I press my ESC key on my labtop that he would open to the top of my Start menu... there at - it a config that I can turn it off?  Sometimes I play computer game it just annoying someone help please (I'm using Windows vista)

    Hi techon,.

    Welcome to the Microsoft answers site!

    Make sure that you not press CTRL when ESC is crossed.

    Please note the keys CTRL + ESC will bring up Start menu.

    You know, keyboard shortcuts
    http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

    If the problem persists, you can follow the steps mentioned in the link below:

    Troubleshoot wired keyboards that do not or only the erroneous characters category

    http://support.Microsoft.com/kb/258826

    If the problem persists, please consult the manufacturer of the laptop computer for more information.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with the arrow keys in the editor

    Hi, I have problem with the arrow keys in the editor. I don't use arrow in the editor to the bottom and select list (list of table fields, for example). Arrow in the result window or navigator to work normally.
    In the editor, I have problem with SHIFT + left arrow also key.
    Someone at-similar problem? (Developer SQL 1.5.5 with patch)
    Thanks for your reply, Petr

    Could be the old and known problem with accelerators, try:

    Preferences - accelerators - load - default setting

    Hope that helps,
    K.

  • Pavilion 15-e070sl: problem with the key "cancelled."

    Hi guys,.

    I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

    I hope you find a solution

    With the availability!

    Hi @MichaelMazz ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

    If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

    Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

    Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

    I hope this helps.

    Thank you.

  • Satellite L850 - 1 H 4 - a strange problem with the FN key

    Hello

    I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

    When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

    Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

    Thanks in advance!

    Its possible to use the function buttons by pressing another button without the use of the fn or FN.
    This option can be changed in the BIOS.

    Go to the BIOS by pressing F2.
    In the BIOS, choose Advanced-> system configuration Options
    Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

    By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

  • HP Pavilion dv6 3110ez: problem with video drivers

    Best regards to all,
    Can someone post a links to drivers for these graphics cards with switchable?
    I tried different drivers, and it does not work on Windows 8 Pro x 64
    and Windows 8.1 Pro x 64.

    The laptop is HP Pavilion Dv6 3110ez.

    Manufacturer: Hewlett-Packard
    Model: HP Pavilion dv6 Notebook PC
    BIOS: Default system BIOS

    Processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
    Memory: RAM 6144MB

    **********************************************************
    It's the code of the ATI Mobility Radeon HD 5000 Series:
    ------------------------------------------------------
    Hardware ID:
    PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C & REV_00
    PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C
    PCI\VEN_1002 & DEV_68E0 & CC_030000
    PCI\VEN_1002 & DEV_68E0 & CC_0300

    Compatible IDs:
    PCI\VEN_1002 & DEV_68E0 & REV_00
    PCI\VEN_1002 & DEV_68E0
    PCI\VEN_1002 & CC_030000
    PCI\VEN_1002 & CC_0300
    PCI\VEN_1002
    PCI\CC_030000
    PCI\CC_0300
    **********************************************************
    **********************************************************
    It's the code of the integrated graphics card (Intel):
    --------------------------------------------------
    Hardware ID:
    PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C & REV_02
    PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C
    PCI\VEN_8086 & DEV_0046 & CC_030000
    PCI\VEN_8086 & DEV_0046 & CC_0300

    Compatible IDs:
    PCI\VEN_8086 & DEV_0046 & REV_02
    PCI\VEN_8086 & DEV_0046
    PCI VEN_8086 & CC_030000
    PCI\VEN_8086 & CC_0300
    PCI\VEN_8086
    PCI\CC_030000
    PCI\CC_0300

    **********************************************************
    **********************************************************

    I solved this problem with the drivers of AMD.  As there'are the drivers of this model of graphics card just for Windows 7 and not later versions of Windows, I just installed this driver in compatibility mode. All drivers for Windows 7 can be downloaded by following this link. Concerning

  • Problems with the shortcut keys, suggestions?

    I have an Asus computer is a portable computer, N56VM. I have problems with my shortcut keys. I can use is no longer the fn + key that usually let me adjust the back of my bright keyboard commands, or my volume (mute, raise/lower the volume), however, my brightness on the monitor shortcuts keyboard still works, and so did my black screen key. Oh, and also, my toggle mouse shortcut is not no longer works. I was looking at the forums, and I upgraded my bios and also reinstalled my ATKPI files and still nothing. I think the problem might have to do with the mechanics of the system, but I am not sure. Any suggestions?

    Hello

    Welcome to the Microsoft community where you can find all the answers related to windows.

    According to the description provided, its looks that you are facing a problem with the system hotkeys, this problem could arise Hotkey readers or the parameters of the system.

    I suggest you day chipset drives and driver hotkey from the manufactures Web site and check if it helps.

    http://www.ASUS.com/notebooks/Multimedia_Entertainment/N56VM/#download

    Note: If the problem persists then I advise you to get in touch with the computer manufacture for further assistance and check if it helps.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • Problem with the volume on Satellite Z30 control - A

    Hello

    I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

    See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

    Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

    If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

    I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

    I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

    Any idea?

    Thank you very much

    PHILIPPE

    Hello

    According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
    That's why the Realtek HD audio Manager software should be available in the control panel.

    Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

    In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
    This software provides audio improvements in your computer.

    To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

  • HP pavilion n242se 15: problem with the BIOS software

    Hello
    I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
    Please, I want to again software for BIOS for Windows 10 64 bit

    Can you help me?

    SyrianCow

    Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

    They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

    The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

  • Problem with the function keys

    Hi a few days ago my computer did an automatic update of windows.  This combination of time keyboard shortcuts in my Microsoft Flight Simulator 2004 have changed.  For example, ctrl + any Fkey and shift-several different keys do not work.  Some commands are not options in games keyboard assignments.

    Is there a way to restore my original keyboard settings?

    Thank you...

    Are you sure that Windows Update caused this?

    Restore your computer (by using the system restore) to a previous state - before you install the updates and see if it restores the 'fn' and other features with FS 2004.

    See http://support.microsoft.com/kb/306084 (assuming you are using Windows XP, because the game is compatible with XP and legacy OS)

    If restore fixed the problem with the keys on the keyboard and FS2004, manually install the updates one: after the installation of each update, restart the computer, try to play the game and check if the problem reappears at all.

    This, until you have installed all Windows updates.

    MRI!

  • Problem with the volume of a new 7 Slate

    I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

    Am I missing something?

    How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

    What if you use headphones?

    Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

    Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

    A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

    _
    As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

  • Problem with the signing key

    Hai guys I have problem with the key signature when signing request l click appears "impossible to ask for signatures until this application with all the necessary powers of signature. any body know this problem? I have send an email to [email protected] no answer not until now.

    * my windows is problem *.

    Thank you

    Well Yes send another.

  • Problem with the product key of windows 8

    I have problem with my product key of victory 8. I installed it in front of my laptop and it is normal until something goes wrong with my laptop. I decided to reinstall my win 8, and when I put the product key, it does not work. What should I do?

    (1) If you encounter problems with activation, try to reboot / restart your PC a couple of times.
    (2) if it is a new installation of Windows 8 / 8.1 try options refresh or Reset.
    If the two options above do not solve the problem of activation, then try activating the phone.

    How to activate Windows 8 by phone

    Press the Windows key + x then click Run, then type: slui.exe 4
    (Another method: press Windows + r and then type: slui.exe 4)

    Then press the ENTER"" key.

    Select your "country" in the list.

    Choose the option "activate phone".

    Stay on the phone * do not select/press any option * and wait for a person to help you.

    Clearly state your problem to the support person.

    ================= Alternatives ===================================

    Microsoft - U.S. support
    http://support.Microsoft.com/contactus/?PID=17655&TID=100109454

    Microsoft - UK support
    http://support.Microsoft.com/contactus/?ln=en-GB

    How and when to contact Microsoft and support Customer Service:
    http://support.Microsoft.com/kb/295539
    Clearly explain your problem to the support person and they will transfer you to the activation service

    How to contact a Microsoft Product Activation Center by phone:
    http://support.Microsoft.com/kb/950929

    To get a list of telephone numbers see method #1

    J W Stuart: http://www.pagestart.com

Maybe you are looking for

  • Repair Boot (Bootcamp)

    Dear members of the Forum, in the past, lonely T helped me already once for this problem - but I need help once again. The original plan: I wanted to extend my Bootcamp partition by stealing some capacity from the OS X partition. That day, I was runn

  • Firefox seems to be ignoring DNS TTL and DNS resolved cache indefinitely

    Hello Since we started to serve our js and css by CloudFront a few weeks ago, we started to see a problem with Firefox, where these goods would not sometimes be charged. So far, the only way I could reproduce the problem has been to load our home pag

  • Overview of the interface user Localizer: possible bug?

    In the CVI 9.0 (and 9.0.1) Localizer UI there's a preview feature which I guess should give a quick overview of the location of the User Interface. But I noticed that if in the file *.uir a channel has a 'Native' character set, the Localizer user int

  • pulse wave simulated

    Hello I try to count the edges of the wave, or simply if a square wave goes from 0 to 1. However, I don't want to use the built-in meter to data acquisition. I want this to be purely software metering without using data acquisition. When I try to det

  • Several tabs in Taskmgr.exe displayed for Vista disappeared!

    While I was moving the mouse on the screen of Taskmgr, all of a sudden everything has disappeared except Services and I couldn't get it back.My taskmgr.exe no longer has a menu bar and has only Services; I can't see performance or Applications tab.Al