Pavilion dv6-3025dx: cannot boot in the bios because of a SMART hard disk error

My hard drive has failed and now I'm making constant pop ups to replace

I think Windows to transfer to an external drive until I can replace internally, but I need to access the bios to set the options for monitoring of the boot every time I use f10 to start in the bios it is as if it is popped and gives me the error screen smart disk where my only options are to start windows or run diagnostics.

I tried to run the diagnostic, but each test resulted in an instant failure.

Yes, get out of the hard drive and connect it to another PC. Get assistance from your service manual for the procedure to apply for, it:
http://h10032.www1.HP.com/CTG/manual/c02659236

Adapter, something like this: Http://www.amazon.com/Anker® - converter - adapter - cable - included / dp / B005B3VO24

To configure the boot order, try this:
http://support.HP.com/in-en/document/c00364979

Press f9 key shortly after switching on laptop, if the above does not work.

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

    Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

    Hello

    Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

    http://support.HP.com/us-en/document/c00364979

    Kind regards

  • My computer is not forward from the Bios, he said: 3rd master hard disk error? (Processor core 2 quad, mother board MSI G41 - P26) Help me!

    CPU core 2 quad, MSI-G41 - P26 motherboard, RAM 2 + 2 Gb, hard disk 640Go

    Hey Suman,

    You can change the configuration of the jumpers to make the slave hard drive. If you are not sufficiently uncomfortable by doing that, then you can get in touch with the local Techshop to do the same.

  • How to reset the screen to start a SMART HARD DISK ERROR

    Hello

    I have a presario CQ56 ((XH167EA) which gives an error screen almost immediately at startup "smart hard drive control has detected an imminent failure".

    I checked the drive Samsung HM321HI with Seagate Seatools for DOS and it confirmed 4 errors (either incidentally, Seatools does not fix the errors of Samsung, although they admit, it should, like Seagate look after "Samsung" readers - they say they "work on it"..)

    I know I have to replace the hard drive thereafter, but have backed up all my files, etc. and the problem does not appear to be a lot worse (for now...).  I am a clear user and am glad to use it until it dies, then buy a replacement.

    Is it possible to stop this form to appear at startup.  My bios is updated.

    And, Yes, it is legitimate!

    In addition, the player is now just out of warranty, but if I can identify when the BULLET is fired, HP will honor the warranty if it is triggered in the warranty period?  I think I can guess the anwer, but worth asking maybe, if anyone knows the rules of HP on this...

    Thank you.

    HA, I know my limits!  We'll leave it at that then - thank you very much for your help with her.

  • G2F98PA #UUF: I have a HP Pavilion x 360 - Smart hard disk error 301 convertible.

    You must back up all important data and replace the hard drive.

    S.M.A.R.T.

    You can run a HDD diagnosis to confirm the hard disk error.

    Test of hardware failure

    You can check if your system is still under warranty with the link below.

    Check the warranty

    If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

  • Pavilion P6-2378: Cannot get into the BIOS

    I've recently updated my BIOS to v8.19 on my motherboard of Jasmine using service pack SP67068 after seeing a security warning on my original BIOS on the HP driver update site.  After the update, I am unable to enter the BIOS and more!  I see more startup or other screen.  Here's what I've done so far:

    (1) I entered "bcdedit/set {default} bootmenupolicy legacy" (and standard).  No splash screen.

    (2) I momentarily pressed and also pressed the ESC key during several start ups.  No splash screen.  When I press ESC after turning, the drive just stops.  To continue, I have to press Ctrl-Alt-Del to continue, and it starts Windows normally without a splash screen.

    (3) I went to change the settings of pc and navigated at startup in the UEFI Bios, but after the restart, but the computer crashes just until I press Ctrl-Alt-Del, then it boots normally into windows 8.0, but without the boot (legacy or HP splash) screen.

    (4) I opened the discount to zero the BIOS jumper and removed the battery for 5 minutes, several times.  No splash screen and press ESC or F10 after that reboot causes hang until you press Ctrl-Alt-Delete.

    I wouldn't have updated the BIOS if it is not for the security warning, as it worked very well. Now, I can't get into bios no more.  Help, please.

    Hello!  Yes, your right, it's the graphics driver!  But I had already updated just before I had this problem, so I rolled back the driver and still had the problem.  But then I realized that my TV is connected to the computer when I upgraded and downgraded the graphics driver.  I've updated the driver with the TV disconnected and VOILA, I see the spash screens and am able to get into the BIOS.  The graphic resolution of boot has been masking splash screens.  THANK YOU for your help.  I am very grateful.

  • HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

    I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

    I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

    How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

    Thanks in advance.

    Hello

    Drive smart error 301 indicated fall drive hard/failed hard drives

    If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.

    You can also order HP recovery discs

    You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.

    If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418

    Back up all your personal data now first.

    Thank you

  • "Smart hard disk error" - HP Pavilion dv6 Notebook PC

    Hello

    I have a HP Pavilion dv6 Notebook PC, which has been meeting for the past weeks starting problems. Normally, this meant a long cycle of-->--> reboot Recovery Manager startup repair until it finally started up properly when trying to 4th/5th so far...

    Now, I get the 'Smart hard drive 301' error message. The "test drive" fails, and I am unable to start my pc.

    Thanks for your help...

    Hello

    Smart disk hard error 301 or failure id XXXXXX-XXXXXX-XXXXXX-XXXXXX indicates the disk HARD on our machine is a failure. You need to replace the HARD drive. It is still under warranry? In the affirmative, please call HP for a replacement.

    In the United States:

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://welcome.HP.com/country/W1/en/contact_us.html
        
    Kind regards.

  • HP Pavilion dv6 - 3320st - Smart hard disk error - replacement?

    Hello

    My laptop is hp pavilion dv6-3320 st and I get smart disk error. I understand that my hard drive is a failure and I need to replace it.

    Unfortunately, I do not know how to find a compatible hard drive for my computer.

    Here's my computer;

    http://support.HP.com/us-en/document/c02735818

    and the hard drive I think to replace;

    http://www.Directron.com/wd7500bpkx.html

    Any help will be much appreciated.

    Kind regards

    Your laptop has a regular 2.5 "SATA hard drive installed.

    Any 2.5 "SATA hard drive should work just fine.

    The hard drive that you have access to will work fine.

    If you do not use a lot of space on the hard disk, I recommend to install an SSD. It is much faster but more expensive.

  • Drive SMART hard disk error no boot device

    I have a HP pavilion dv7-4170us, and I got an error when I turn it on. I finally bought a new hard drive to replace my hard drive but now nothing works. It says error hard drive SMART, it detects an imminent failure and I needed to back up the content and then run a hard drive test in the diagnostic system. I did a test drive and it says failure with failure id: product GG3SXH-5JW77L-XDOO3F-609AO3 id: XH1O4UA #ABA. I can get anywhere on my computer to save anything and when I turn on the hard disk, it is said to put a bootable device but I did not. Help, please!

    No, I just needed to get revovery media dvd and then I have can use my new HDD is I did fjnd but thanks!

  • HP Pavilion 15-r007TX: Smart hard disk error

    Hello.

    The last 2 days im getting Smart hard drive failure, everytime I turn on my laptop. But it works very well but there are some unexpected Frost in between jobs.

    It is said

    Hard drive 1 (301)

    If I run the system diagnosticks, it gives me an ID QCU008-7AK882-XD7V7F - 80A 203 failure
    and a product ID (i forgot to remember).

    What could have caused this problem? And what is the solution for this?

    I need to replace the hard drive? How much it could cost to replace?

    My PC is under warranty Accedential and type of HWM on-site service.

    Please help me.

    You need to make a claim. The hard disk will be covered and will cost you nothing so that the replacement of on-site service. It's a bad hard drive. You save?

  • Laptop 17 inch Pavilion Pc.: Smart hard disk error

    Respected by all those that I got a "SMART disk error" error smart disk check has detected an imminent failure. To ensure no data loss Please save the content immediately and run the system diagnostics hard drive test. Hard drive 301.
    Now what should I do?
    My model number is 17-f114dx
    Please advice me a good way to solve this problem.

    Hello

    Your laptop is listed as coming with a 750 GB hard drive - the drive on the following link is an example that would be perfect for your laptop.

    750 GB hard drive.

    The procedure to replace the hard drive begins on Page 104 of your maintenance & Service Guide.

    Once this is done, simply use your recovery DVD to reinstall the original operating system (Windows 8.1) on the new drive and then upgrade to Windows 10 once again.

    A better option, as long as the previous installation of Windows 10 had activated Ok after the original 8.1 upgrade, would be to simply perform a new installation of Windows 10 as detailed in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Best regards

    DP - K

  • When I turn on the laptop I get the error SMART hard disk error message

    HP Pavilion DV7 windows 7.

    How can I fix it to this laptop works?

    It is a warning of hard drive.  If the PC does not start, there no more than likely.  I hope that he there backups of data that is valuable, because it may be unavailable now.

    Replace the hard drive and use the Recovery DVD that was made when the PC was new.

  • Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key


    Thanks for your help and please excuse my bad English.
    Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

    (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

    (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

    (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

    (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

    So I have 2 HDs identical with the same system on both drives, fully working and tested.

    (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

    (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

    (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

    (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

    Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

  • Cannot get into the BIOS on my Portege R700

    Hello friends,

    I have laptop Portege R700-1321.
    1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
    try a passer-by but noway :(

    When you press F2 after you restart the computer nothing add and put it back again.
    try to change ro F10 boot order but still just restart :(
    I need to change the boot order to install the new OS fresh and of course my BIOS setting.

    Please help me.
    If any body had a same problem or know how to fix it :(

    First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
    You can press F12 all turn on/off the unit.
    Then a menu should appear where you can change the boot device.

Maybe you are looking for

  • Why the keyword "google" is not accepted?

    I use keywords in search bar url bookmarks. Now the key word 'google' for my missing suddenly google search and if I reintroduce, it is not stored with the bookmark. Different bookmarks are accepted, but not "google".What can I do (except using a dif

  • Move SSDS to a MBP to a newer MBP

    I'm looking for a 2008 Macbook Pro 4.1 update 17 "A1261 to a Macbook Pro Unibody 8.2 2011 15" A1286 The 17 "Macbook Pro has an SSD that has a managed installation of OS X El Capitan. Is it possible to remove the 500 GB HARD drive at least 15 "Macbook

  • Windows 7 000000643 update error

    I am running Windows 7 and just did an update. Windows Essentials has been updated and installed, but Microsoft Silverlight will not settle. Error code 000000643 has come. Can I remove the Silverlight program and try and download the new version? Or

  • Wireless on dm4

    Had to do a clean on a new dm4 install, after that it has been infected by viruses.  I installed from a stock disc Windows 7 home Premium, not a manufacturer OEM HP. Currently having trouble getting wireless working network card.  I can't seem to mak

  • How can I move music from windows media to a sd card player in the f drive?

    I cannot copy music windows medea on my sc card player in drive f...