Pavilion DV6 3055tx blue screen after RAM Upgraderei

The product name and number: HP Pavilion dv6 3055tx

 

Pre-installed RAM: 3 GB

Operating system: Windows 7 Home Basic 64 Bit (90 days)

 

Error message (if any): blue screen on startup of the BONE

All changes to your system until the problem occurred: RAM upgrade

 

In the title of the topic, include a brief and accurate description of the problem and your product information: I use this product for a long time... Good...

 

One day, I thought to upgrade my RAM, so I ordered "CRS 4 GB LT_CMS04GX3M1A1600C11"

 

Corsair 4 GB DDR3 RAM simplified eBay India

 

After I received the product, I open the back panel and removed the 1 GB RAM Samsung and Corsair inserted one I ordered.

 

After this, I restarted my system

 

When starting Windows came to loading blue screen suddenly comes and laptop restarting

 

Then a black screen comes with 1. Launch the tool to restart System 2. Start Windows normally

 

I gave my chance for both, but the same blue screen.

 

After that, I removed the two Rams and inserted as a single Corsair

 

Same blue screen

 

Then I open BIOS and it says 4096 MB installed memory

 

After that, I inserted the 2 GB with it means Total two-channel 6 GB

 

But again Blue Screen and BIOS saying 6144 MB

 

What is the problem?

 

Please help me solve the problem.

 

The eBay seller is ready to replace the RAM, but I want to know if this could be a compatibility issue.

 

Thank you... Waiting for a good answer

Hello:

I can't find any specs on that you bought it from memory.

Your PC will run from 8 GB of memory, but you must be careful as to what memory you select.

You must get the PC3-10600 (1333 MHz) memory and it must be of low density.

You can't get PC3-10660 or PC3-10666 memory and cheap will be high density and will not work in any case in your laptop.

You can see this related posts with someone who had the same problem, and when he bought the good memory, his problem was gone.

http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dv6t-3000-RAM-upgrade/m-p/2492127#M17965

I think you bought PC3-12800 memory and this is probably the high density - two bad things.

Tags: Notebooks

Similar Questions

  • Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

    Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
    Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
    When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

    By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
    -

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033

    More information about the problem:
    BCCode: 1000007e
    BCP1: FFFFFFFFC0000005
    BCP2: FFFFF88006EFF443
    BCP3: FFFFF88003399D68
    BCP4: FFFFF880033995C0
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\031212-28672-01.dmp
    C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt


    -
    Can someone give me advice on how to solve and prevent this problem?


    Thank you

    you have the HP-tools installed?
    They often conflict with VMware.
    Try disabling the startup of the HP-tools

  • HP Pavilion dv6-1277el blue screen and disk hard error 303

    Hello

    I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

    I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

    Restarting the laptop I received the following message from the HP auto test:

    Hard drive 1 fast (303)
    Hard drive 1 full (305)

    The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

    What should I do? Anyway to change my HARD drive or her trust?

    Thank you

    Hello new solvayhütte.

    Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

    You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

    To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

    If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

    I hope that this information has been useful.  Have a great day!

  • Blue screen after the recent updates of security for Windows XP SP3.

    I got following error messages "Blue screen" after the latest updates from Microsoft:

    0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

    @Jazzman1962 and flowie,

    I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

    -------------------------------------------------------------------
    Naveen
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • game problem: blue screen after 10 min

    Hi all

    my system is the 3000 N200 0769 - BDG (T5250, Intel X 3100) with 4 GB of RAM and Windows XP Professional. I know that this laptop is not designed for games, but it should not crash, if I want to play something.
    So far, I tried HL2 and Trackmania Nations Forever. Both games run under low or good enough way of details, but I get a blue screen after a few minutes.
    I installed the latest graphics drivers from Intel and all my other drivers are up to date. BIOS version: 68ET26WW
    I have not yet met problems with other programs.

    Thanks for help


  • Adding RAM causes freeze or blue screen. RAM works well with Win XP

    I upgraded from Win XP to Win 7.  I had problems with the installation so I removed all non-essential equipment and was able to complete the installation.  When I add more RAM, I had emoved (two DIMMs of 512 MB) to the current 1 GB DIMM, Win 7 either freezes or I get a blue screen after boot up (it does not boot up to the desktop computer).  Even RAM works very well with my old XP OS (I did a disk clone before moving to Win 7).  The card motherboard BIOS is up to date (according to eSupport) and DIMMs are the same characteristics (a 1 GB DIMM and two 512 MB DIMMS for a total of 2 GB).  Windows 7 works very well with just the 1 GB DIMM in memory 1 of 3 location, but any combination of causes freeze or blue screen.  Is there something on the way Windows 7 manages RAM which is causing the problem?  If so, is there something I can do to solve the problem?

    try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
    confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
    http://www.memtest.org/

  • Satellite L450D - 13 X - blue screen after BIOS update

    I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

    Is there contact information for Support TOSHIBA?

    Hey,.

    > Is there any TOSHIBA support contact information?
    No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

    Here is a list of aspic, where you can look closer:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

    Good luck! :)
    ?

  • 8530p blue screen after the awakening of the mode standby.

    Hello.

    Windows 7 Enterprise 32-bit. (EDITED)

    A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

    The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

    According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

    Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

    The online tool, said there is no update available on the BIOS drivers.

    I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

    I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

    So so I need help to find out what software might be behind this error.

    I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

    So is it a known software that could be the cause of these problems?

    EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

    Sorry I have not responded earlier.

    It seems that the problem is solved since the user had no blue screens for over a week now.

    The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

    Best regards

    Ljungan.

  • Get windows error blue screen after installation Service

    I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

    I tried to install GO twice and got the same error.

    Awating for your valuable review

    Hi piZviZ,

    Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

    (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

    (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

    (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

    I recommend just update to the latest going TO if possible.

    Kind regards

    Joseph

  • Blue screen after installation KB2393802 / KB890830

    Windows 7 Ultimate

    I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

    My impression is also that other side to this problem if you for example search KB2393802 on google.

    Is it a known Microsoft issue and if there is a fix available for this?

    Any hint is appreciated.

    Cheers, mikeych

    Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

  • Blue screen after installing security update KB2419640

    After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

    TIA

    See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Get blue screen after Windows KB968389 updates

    I got the blue screen after that almost each update of Windows, but later is the following:

    Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)
    Update for Windows Vista for x 64-based systems (KB968389) (11/08/09)

    I have a new Dell laptop Studio 15.  Do the system restore still does not work, or do not put the machine in Mode without failure.  I'm tired of spending hours trying to get my machine up and running

    Hello

    Certainly Support Dell help you change things anymore they can claim it was something
    you did it.

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/

    My thoughts are that it is a driver problem. Try to update your drivers, and then stop the updated driver in Windows Updates.

    -----------------------------------------

    This is my generic how updates of appropriate driver:

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ----------------------------------------------------------

    My generic blue screen troubleshooting if necessary:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -----------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------------------
    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    ------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

    Hello
    I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

    Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

    Any guidance will be appreciated. Thnx Nick

    Hello

    If you meet this new,
    http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

  • HP Pavilion dv6-3055tx keyboard key problem

    Dear Sir

    My laptop is HP Pavilion dv6-3055tx and win 7 ultimate 64 bit installed.

    Leave for a few days, I noticed that three keys on my keyboard don't work all the time that the wifi key is YOU.

    These keys are:

    1 remove

    Left arrow 2

    Right arrow 3

    When I disable the wifi key, it works normally.

    I don't know what really is the problem?

    Please help me with this problem.

    Thank you

    Hello

    Sugg_r_es following.

    Open windows control panel, open Device Manager, expand keyboards, right-click on the "Standard PS/2 Keyboard" entry and select uninstall.

    Shut down the laptop - if you're running Windows 8/8.1, do it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

    Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Kind regards

    DP - K

  • Unable to start - blue screen after Windows update

    original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

    Can not even go in safe mode

    Hello

    try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    If you can make the above change how you receive updates to find the update problem

    When right-clicking on it UAC prompt you hide it

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Choose one of these settings:

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

Maybe you are looking for

  • Problems of cable 20 m ethernet LAN card

    I connect to the Internet through a router via an ethernet cable from 5 m. I want to extend that to a 20 m cable. When I plug the cable of 20 m, the lights at the rear of the lappie did not and I can not establish a connection. I tested the cable and

  • Disk space issues

    Hello, I discovered this problem, try to install some programs, I got the message "Complete startup disk" pop - up so I opened the storage news. As you can see in the picture 'Other' section is supported of the disc space. I have no idea of what occu

  • . HP Photosmart 5514 will not print black

    I changed my black ink cartridge in my HP Photosmart 5514 (CQ183A product number, serial # {Private Information Removed}) and now it won't print black.  The colors work fine, just no black. I have cleaned the print heads, made the secondary allignmen

  • last logon of the user to the database

    HelloI need to find the last logon of the user to the database, any ideas who view data dictionary can help me?Thank you.

  • Automatic sorting of members in good standing of the load

    Dear all,How to disable automatic sorting when I use rules files to build my dimension? I use the default setting of the build dimension parameter that is defined on any of the members of tri and I sort by request (the source is SQL) but it failed. I