Pavilion dv6-6145dx and Windows 7 - touch pad sensitivity

Similar Questions

• HP Pavilion dv6-6b56er and Windows 7 x 64 Professional

  Hello.

  I bought Pavilion dv6-6b56er with pre installed Win7 x 64 Basic, which is not convenient for me, because of its lack of features. So I made a full backup of the hard disks in the Pavilion and removed all software it. Then I installed Win 7 x 64 Pro and facing difficulties regarding the drivers of USB 3.0. Everything else works fine. I know that HP is not responsible for all of the experiences with the software that is not pre-installed, but I have a few questions.

  First of all, should what driver I install to ports USB 3.0 flag? To the download page, I found three different options:

  1 Renesas.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99763-1&cc=us&DLC=en&LC=en&...

  2 NEC.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en...

  3 fresco.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102204-1&cc=us&DLC=en&LC=en...

  and

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100237-1&cc=us&DLC=en&LC=en...

  The first two were installed (I mean they CAN be installed), the third - not at all settled. So what is the reason to put it on the download page?

  We're crazy. When you try to install the package with driver NEC, installation master tells you, that it is pilot of Renesas. There therefore no NEC drivers on the download page at all. Why I paid so much attention to it? I installed Everest, so I know what driver is needed. He tells me that I "NEC uPD720200 USB 3.0 Host Controller". Thus, there is no driver available on the download page for NEC chipset and we have NEC chipset inside.

  During this time, Windows Support Center offered some NEC USB 3.0 driver (http://ftp.hp.com/pub/softpaq/sp47501-48000/sp47677.exe ).

  So, who's right?

  The second question. If attempts to connect to the USB 3.0 a compound device (e.g. usb hub), then in "devices and printers" appear strange devices with the label "no data". If Renesas driver has been installed then ' USB 2.0 hub "appeared, and so Windows proposed NEC - then «NEC Electronics USB Hub» The County of strange devices depend on the number of devices connected to this unit composed. It's my main problem - these strange devices.

  So I came to a dead end. Any ideas to fix this?

  Any response will be appreciated.

  PS. Sorry for my bad English.

  The Recovery Manager is indeed on the hard drive. The version that is on the dvd discs doesn't have as many options as the original get the version of the partition.

  If you use recovery factory reset it will install all the original drivers and also recreate the recovery partitions. After finishing of the recover and have restarted the PC, you should be able to use the F11 key to access the hard disk again.

  You will need to reinstall the UEFI utility using the download from the section web software support and drivers under utility-tools. Given the usefulness of UEFI hard disk is a good thing.

• HP Pavilion dv6-6077er and Windows 8

  Is - this HP is going to add Windows 8 x 64 (as pilot) support for HP Pavilion dv6-6077er laptop? If so, when?

  Hey Alex.

  Try your luck here

  http://Forum.NotebookReview.com/HP-drivers-software-Forum/556469-drivers-HP-DV6-4xxx-DV6-6xxx-dv7-5xxx-dv7-6xxx-envy-14-2xxx-envy-17-2xxx-Intel.html

• HP Pavilion dv6-3011so supports windowS 8?

  Hi I m asking if HP Pavilion dv6-3011so supports windowS 8?

  Hello:

  It could be, but I don't know about the graphics.

  I ran the 8 upgrade advisor windows and see what it reports.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

• My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  My Pavilion dv6 upgraded to windows 10 what happened to my external screen does not

  Hi @Jake08,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and questions with external screen works not properly. You can try this without the connected external monitor.

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Please let me know how it goes.

  Thank you.

• HP pavilion dv6-6150sl and I need to find drivers

  Hi, I bought a hp pavilion dv6-6150sl and I need to find the drivers for it, can someone please help me thank you, im using win7 64 bit

  All the drivers for your model that are compatible with Windows 7 64-bit can be downloaded from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5144860

• Dv6-1308EL: Pavilion DV6-1308EL - upgrade Windows 10

  Hello all, as I wrote in the topic I like upgrade to Windows 10.

  I got the notification about the free upgrade, but I'm corcerned on drivers and compatibility in general.

  Some time ago I tried to install it and try it for 30 days Windows 8.1. I installed the drivers from windows update in regards to the trackpad driver that the operating system will freeze and restart continuously making it impossible to use.

  My laptop is a Pavilion DV6-1308EL with Windows 7 Home Premium (64-bit).

  I also tried to call the customer service, but the one thing they tell me, is to wait a while to see if will be released drivers.

  I hope that someone has tried to upgrade and can share his experience or if someone from HP can I update level or no advice and tell me if the drivers will never be released.

  Hi, Lorenza:

  It is a peer to peer forum.

  The volunteers here at HP person is allowed to respond to all positions on behalf of the company.

  I can assure you that HP will not release the drivers W10 for this series of models.

  I can make that statement because they do not have all the drivers to W8 or 8.1, so that they free to W10, logical.

  If you have tested W8.1 on your laptop and it did not work properly, it will be the same or worse with W10.

  You can uninstall the driver for the touchpad that installs windows 8.1 and use taking in charge of your laptop and driver page.

  Ignore the touchpad Windows 8.1 update by unchecking it and hide.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• SR 3015 HP Pavilion dv6 8.1 Windows x 64

  Good afternoon. Installed a new windows 8.1, pilots have become almost everything automatically, except one. I found the missing driver with help DriverPack Solution 14 R407. But this problem is not resolved, I don't work mode "sleep" after having closed the back cover, he did not return to the standby mode. Dear experts please help with utilities for HP Pavilion dv6 SR 3015 windows 8.1 x 64, where I can download the full program or game required for this model. The fact that on the official site, this model HP Pavilion dv6 SR 3015 supports only windows 7. Thanks in advance for your collaboration. HP - OUR CHOICE!

  I want to add that, after installing windows 8.1 x 64 does not work its LED button, it remains lit in red when turned on or off

• I have a HP Pavilion dv6-2088dx, and the power light flashes constantly, that means?

  Help.

  I have a HP Pavilion dv6-2088dx and have had for a little less than two years now.  About 8 months ago, I replaced the original battery with a long life Rayovac battery.  Recently my laptop power light has been constantly intermittently to about 1 flash every 2 seconds, regardless of the level load and/or if its plugged to the power source.  What exactly my computer is trying to tell me?  Thanks for the help in advance

  -Kyle

  I found the link to your question.  I hope this helps.

  http://h10032.www1.HP.com/CTG/manual/c01884775.PDF

  

• Pavilion dv6: 10 for Windows upgrade fails Pavilion dv6 after update and entry of password

  After updating my Pavilion dv6 Windows 7 64 - bit of Windows 10 64 - bits, the connection to the computer to update resulted in a machine stuck with white (gray) screen. The upgrade seems complete without any problems. It is only after a reboot with the machine being upgraded and after entering the password that the lock status was encountered.

  You can see if any of the suggestions in the linked thread works - but DV6 succeed well in Win10, and if none of these work, you need to consider restoring to Win7: HP Notebook PC - computer starts but the screen remains empty (10, 8 Windows) | HP® customer support

  I have a DV6 and after many hardships, restored to Win7 because I felt that an older OS where everything worked was much higher than a more recent OS where many things were "broken."

  And there is no driver HP Win10 for the DV6.

• HP Envy m6 and HP Pavilion dv6: Bluetooth and Webcam on my two computers

  Hi, my name is Frank, how do you!    I posted this elsewhere as well for maximum exposure!  That is why it says that I just discovered your post but anyway: it's here >

  I just discovered your post response and I have a similar problem (the reason I'm here looking, Eureka!) so I thought that I would like to take this opportunity to ask, if you allow me to my situation.

  I bought my computer a little before 12/25/2012 at BestBuy.

  It of a laptop of HP Envy m6 with original 8 Win 64-bit free upgrade to Win 8.1 last year and is about to pass to Win 10 when it was released! Yes!

  Product number is C2N76UA #ABA

  BIOS is F.26

  Motherboard: 18A 4 73.50

  GRAPHICS CARD: GPU Intel(r) HD 4000

  Microprocessor: Intel9R) Core (TM) i5 - 3210 M CPU @ 2.5 GHz

  Operating system: Windows 64-bit upgrade 8.1 soon to be upgraded to win 10 64 bit!

  Memory: Two 4 GB Samsung 1600 MHz for 8 GB Total 

  l would like to know if the PC above was supposed to come with Bluetooth or not? and if not, if I could buy an adapter thru HP? who would do it works through this PC

  (I also have another older PC HP laptop Pavilion DV6 with Windows 7 service pack 2 (later) that I would also have Bluetooth adapter)

  (This Win 7 PC has broken built in WEBCAM I need to fix at some point, advice on this issue?)

  YES, I KNOW I STARTED THIS QUESTION ABOUT BT!   Anyway, I can't get built in webcam wanting to work more, it allows to work so after researching, I probably have to send it to HP (diagnostic research and trial and error to internet) for repair or buy an external (which is undesirable) but anyway:

  (if you can shed some light on this topic, I would appreciate it because I'm here asking questions anyway for efficiencies sake!)

  Or buy a new computer, haha, I don't really need except for this integrated feature and maybe the touch screen... (I'll probably do that if it is not repairable.)

  Sorry for being verbose but I wanted to take this opportunity to get rid of all the problems I've seen all at once and spend so much time in the research and diagnosis and try to troubleshoot and fix my computers instead of just using their...  The computers sometimes can be a waste of time, you know.

  I really want to use to be productive not only to maintain so I really appreciate any help I can get on it.

  Thanks in advance if you take the time to answer, and if the appropriate solution is provided, I'll be sure you shower with braces and others and you honor as a true expert!

  Bravo. Congratulations to give, hurrah!

  Thank you and I'm waiting... (s) to more than 3 numbers!

  Sincerely,

  Your internet friend,

  Frank H

  PS: I will monitor your response, thank you! : bravohelen: hmm no showing emoticon...

  Hi, Frank:

  Your Envy laptop does not come with built-in bluetooth to the specifications of the product on the link below.

  http://support.HP.com/us-en/product/HP-envy-M6-notebook-PC-series/5296045/model/5312259/document/c03489413/

  If she had come with built-in bluetooth networking, this feature would be are indicated as well as WLAN 802.11b/g/n wireless connectivity specifications.

  I bought this external usb bluetooth adapter for my HP desktop computer, and it would work very well any laptop too.

  http://www.Amazon.com/Kinivo-BTD-400-Bluetooth-4-0-adapter/DP/B007Q45EF4

  Unfortunately, I wouldn't be able to help you with the problem of the webcam.

• HP pavilion 15-E015TX: my computer laptop touch pad keeps freezing

  I had this problem with my HP laptop for a while now. My mouse freezes randomly when I use my touch pad, please tell me what to do with it.

  Product no: E3B55PA #ACJ

  Operating system: Microsoft windows (64-bit)

  Hello

  Try to download and reinstall the Synaptics TouchPad driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63353.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Pavilion dv6: cannot get Windows 10 to work for more than a few days before video fails

  I have a HP Pavilion dv6 with two graphics cards (Mobile Intel (r) Graphics and Raedon (TM) HD 6490 M). I installed the new Windows 10 twice and had a lot of success for about three or four days, then the display did not work. I was able both to restore Windows 7 but I want to take advantage of the free upgrade to Windows 10. Does anyone know of an incompatibility with my HP Pavilion dv6 and 10 Windows?

  It could be windows update tries to give you updates of adapter bad display every time. You have updated automatically whenever you install windows 10? If so, update the manual and ignore all updates that show the AMD, ATI and INTEL. I had the same problem but not with windows 10, I had it on windows 7 and 8.1 with the same computer, I didn't go to http://support.amd.com/en-us/download . Then select the automatically detect and install download and run it. If the screen turns off right after finished installing your drivers, then it must be the war video card causing problems.

  Maybe it's your video drivers are fighting eachother for domination, when the screen messes up, try to hook up an external monitor, if your computer has an additional port. Let us know.