Pavilion dv6-6c55se: My HDMI port is not working

Hello

I upgraded my windows to 8.1 - 64 bit and after that I found my HDMI port and Bluetooth does not work, since this page, I have Download Intel high definition (HD) Graphics Driver that complete the installation with an error that says:

---------------------------
This computer does not meet the minimum requirements for installing the software.

---------------------------
also, I downloaded Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows, but nothing happened, however, I'm prety sure that my bluetooth product is the Intel® PROSet/Wireless software for Bluetooth® technology (it was the previous windows driver) that I downloaded from this link, and it didn't work.

I'd appreciate if someone helps me.

Procuct model: pavilion dv6-6c55se

Maybe your model didn't need driver wireless button.

The dv6-7000 models require this driver running W8/8.1.

Most of the older models do not use it, but I didn't know where the break was.

I just guess that maybe that was the problem.

Unfortunately, I don't have any other suggestions for you to try.

I have rarely, if ever use bluetooth, so I have zero skills of troubleshooting for bluetooth.

Tags: Notebooks

Similar Questions

  • HP Pavilion dv6 Notebook PC: HDMI Port does not

    I updated my Windows 10 operating system and since that time the HDMI port did not work to my TV. This worked fine before the upgrade. I deleted the Intel drivers and installed the chipset as recommended on a previous post.  I tried another cable. It did not work.  The message on the TV is No Signal.

    Hi @Saxnot, @muzza180,.

    HP has worked closely with Microsoft on the development of Windows 10 and drivers for graphics cards. Currently there is no driver available for your system. You can try and check at a later date, because I see new drivers all the time.

    Thank you.

  • HP Pavilion DV6-1355dx: all USB Ports do not work

    All the USB port of my laptop, identified above, has stopped working. I tried in many troubleshooting recommended by the operating system (10) and support Microsoft centre but I could not solve the problem. Device Manager still show the (!) exclamation point for all USB ports. Can I have the drivers or a fix that allow me to re - install the Intel® ICH9 Family USB Universal Host Controller?

    Thank you very much

    Carla Hamilton

    The problem is resolved.

    I reinstalled Windows 10 a recommendation of Microsoft Community available to

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/USB-ports-not-working/275b9f17-fd56-4DBF-ba71-c674c68d7060

    I want to thank those who have made efforts to help me on this issue.

    Thank you.

    Hamilton

  • HP Pavilion dv6-6130us: My USB ports do not work!

    Hello, I had installed Ubuntu on my computer for awhile, then I decided to re - install Windows 7, and when I did, the two USB ports on the left side of my keyboard did not work. I also have Ubuntu along side windows in a dual boot, and they work perfectly well under ubuntu. I'm having a bit of trouble, and it becomes very frustrating. Yes, there are things that I need to install or drivers? Or am I out of luck?

    Hello:

    Yes, your laptop is probably missing drivers USB3.

    The problem is that there are 3 pilots USB3 from different model on the support page, so please do the following steps and I stood at USB 3 controller your model and I'll post the link to the right driver, he needs.

    If the drivers are not installed, you will see a device named USB controller listed in the category other devices.

    The USB controller will have a little! mark next to him (which means that he needs a driver installed for it to work).

    If you see that, click the USB 3 controller device.  Then click on the Details tab at the top of the USB3 controller window.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the second element (Hardware ID).

    After the first string of characters you see in the window.

  • HDMI port does not work

    Original title: HDMI port stopped working after the update.

    This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

    I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

    Update your BIOS can help you too.

  • HDMI port does not work after you refresh the computer.

    Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

    Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

    If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

  • Satellite R830 - HDMI port does not work

    Hello

    Is there a driver for the HDMI for the Satellite R830 port?
    It is no longer connects to a TV.

    I tried different TV but still nothing.
    Also there is no HDMI in under the control panel Device Manager, should there be?

    Thank you very much for any help or advice.

    Hello
    I put t know what Windows system that you use on this laptop, but the driver HDMI isn't available from the HDMI port driver is part of the system and should be recognized automatically.

    Capacity Audio HDMI you need to install the right audio driver and should allow this in Control Panel-> sound-> playback device

    HDMI (digital out) would be not listed there, right click and choose:
    Show devices disabled, view hidden devices.

    Usually the HDMI connection isn t very delicate. Everything should run automatically.
    Connect both devices with a HDMI cable.
    Turn on the TV, then the computer.
    Now, use the exit function FN (key) video combination in order to get to the video (HDMI).

    Note: the correct HDMI channel must be selected on your TV

    All that s

  • HP pavilion dv6 notebook (my dvd burner does not work

    I have a hp pavilion dv6 laptop. my burner does not work. I went to the Device Manager I uninstalled, shut down the computer, restart the computer, the device mgr.enable the writer went I have little yellow guest. still, the writer does not.

    I perform a driver update, the response was: the driver is already installed is to this day. My dv6 is 28 months old.

    need some advice.

    under Device Manager.  CD-ROM/DVD-rom readers

    HP cddvdwsn-208bb

    "device usb HP dvd writer 940D thank you billy'g"

    Hello

    Try please run now from the following link:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Kind regards.

  • Pavilion dv6 - 7 k: HP wireless button not working not!

    Sorry, my bad English!
    I use a laptop A3E82AV product name. After upgrading 8.1 wireless F12 key does not work when I hibernate & resume. If I retart or shutdow, it works normally. When I was with Windows 7 (OEM), it worked normally.

    I am currently using the latest version of the driver for HP wireless button 1.1.2.1

    Anyone have a same problem with me? pls help. Thank you!

    Hi @ANTRAN2106 ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7000 and issues with the F12 key after and 8.1 of Windows upgrade. This is a link toHP Quick Launch software. It is under Software Solutions on your driver page.

    It will help with the F12 key.

    Make sure that all updates have been met with Windows it is under change PC settings. It is enough to click on the Windows key and start typing the laptop settings.

    I hope this helps with the wireless button.

    Thank you.

  • Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

    Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

    Hi cdk14031


    You have set display up-to-date drivers installed?

     

    Step 1 :
    To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Step 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

     

    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    You can also check the support link and check if these help - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    I hope this helps.

  • I recently installed Windows 7 Home Premium (x 64) on my HP Pavilion DV6 laptop and now Aero does not work!

    It is all opaque and I'm trying to install the Intel graphics drivers and Nvidia graphics will not work!

    What I'm doing! She also does not connect to the internet, the sound does not work and I cannot adjust the brightness of the screen.

    Should I try Windows 7 Ultimate? (My PC is recorded, not mobile phone).
    I will provide you more details if you need.

    Hello

    Please review these links and see if the problem is resolved.

    Open the Aero Troubleshooter

    Please visit this link and check if the hardware and software requirements are met.

    What is the Aero visual experience?

    Please get back to us with the State of the question.

  • U460 HDMI port is not working

    Just got U460 (i5), plug a cable HDMI to HDTV, nothing comes out.  Do I need any configuration or is a default unit.


  • I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

    I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

    As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

    You should probably use a video capture card that can capture from HDMI source,

  • After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

    Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

    • HDMI port does not when I connect the laptop to my led tv
    • In the windows operating system sleep mode is dissappers.
    • On the start menu, the language is Hindi

    There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

    Hello

    As mentioned above, restoring Windows 8 will allow:

    http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

    Good luck.

  • Hi, my HP pavilion DV6 1250 headphone us port is burned. Necessity of the replaced part.

    Hi, my HP pavilion DV6 1250 headphone us port is burning with a kind of a power back I think. I had hooked him up to a DJ sound system when electricity is out and CAME back in a few seconds, then I heard a few sparks and saw that when the headset plug was plugged into the pc, he smoked.  I pulled the plug, but at this time that the pc had already closed. Fortunately for me it works including my speakers so I can hear my sound through the pc speakers but fails to plug in headphones and microphones. I opened the pc and removed the circuit board that the helmets are on and now I need the part replaced. Where can I get one?

    You can use Google or eBay search number, call HP or usage, catalogue of spare parts surf

    http://PartSurfer.HP.com/contactus.aspx

Maybe you are looking for