Pavilion dv6: cannot get Windows 10 to work for more than a few days before video fails
I have a HP Pavilion dv6 with two graphics cards (Mobile Intel (r) Graphics and Raedon (TM) HD 6490 M). I installed the new Windows 10 twice and had a lot of success for about three or four days, then the display did not work. I was able both to restore Windows 7 but I want to take advantage of the free upgrade to Windows 10. Does anyone know of an incompatibility with my HP Pavilion dv6 and 10 Windows?
It could be windows update tries to give you updates of adapter bad display every time. You have updated automatically whenever you install windows 10? If so, update the manual and ignore all updates that show the AMD, ATI and INTEL. I had the same problem but not with windows 10, I had it on windows 7 and 8.1 with the same computer, I didn't go to http://support.amd.com/en-us/download . Then select the automatically detect and install download and run it. If the screen turns off right after finished installing your drivers, then it must be the war video card causing problems.
Maybe it's your video drivers are fighting eachother for domination, when the screen messes up, try to hook up an external monitor, if your computer has an additional port. Let us know.
Tags: Notebooks
Similar Questions
-
Get Mail does not work for more than the first two of my 5 email addresses.
In order to access new messages for the other 3 accounts I have to select them individually.
Menu Tools > account settings > server settings and ensure the control of this server when getting new messages is checked. (if available)
-
How can I get my receipt of purchase for more than one year?
How can I get my receipt of purchase for more than one year?
Hi thomasfonality,
Please see to manage your membership and your payment. Creative cloud. You will find the instructions to print your receipt in the payments section & credit card.
Please let us know if you need additional assistance.
Best,
Sara
-
I upgraded from Vista home premium to Windows 7, you use an Acer upgrade pack, I have an Acer 6935 G. Yesterday, the upgrade is stuck at 18% during the 'gathering of the programs and setting files. I left it overnight to see it was still on the same section but had reached 88 percent. Its now been stuck at this point at least 10 hours (do not know where it has reached this point last night so it could be longer than 10 hours).
I am a novice with computers so don't want to stop the upgrade to halfway through, I do not know the consequences could be, but what I can do? THE SUMMER IS GOING FOR MORE THAN 24 HOURS! He could go to 24 others. I tried to get on the Microsoft technical support, but my product key was not recognized? and it would have cost £47 to pay for the support!
It's very frustrating, I am at my wits end but I can't find any help for this specific problem.
Thanks for the help everyone, has been flooded with tips, really very good to everyone.
In frustration, I opened and closed the CD tray with instantly invites him to work again. If someone falls on a similar problem, they might try the trick that the laity were to formulate itself despite dark and sincere call for help.
-
try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work
After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall. For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.
I have a copy of Windows XP Pro, installed in such a way that very well. Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc. I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet. Would have hoped that these devices are plug n play, but apparently not.
I used a Ubuntu LiveCD to connect to internet. So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.
Found the drivers on this site:
Those downloaded across the network. In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel. Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found. So I guess that's the Broadcomm one. This driver, installation actually installed. However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.
Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above. Windows indicated that the correct drivers were not found there.
I'm at one end. The material seems to work under linux, but cannot get the win to install the drivers. Advice or help appreciated.
Hello:
This is exactly what I need.
First install the Chipset driver and reboot:
Then, install the graphics driver;
Then, install the MS UAA HD Audio Bus driver:
Then, install the HECI driver:
Now for your pesky NIC... It's a NIC from Intel.
Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).
Paul
-
I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!
Hello
Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.
If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.
Just in case you need to reconfigure your network.
---------------
Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
* Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
-----------------------
Jack MVP-networking. EZLAN.NET
-
Is it possible to get Windows 7 Pro to recognize more than 4 GB of ram?
I added and additional 4G of ram, is it possible to get Windows 7 to use it?
Hi Joseph,.
Using Windows 7 Pro 32-bit or 64-bit?Unfortunately, if you use 32 bit, 4 GB of RAM is the maximum.However, if you don't use a 64-bit, go to control panel > system > advanced system settings > under 'Performance' settings > Advanced tab > change under "virtual memory".Here you can set pagefile size to be set automatically, or you can set the size manually yourself. -
How can I get windows update to work for sp2 to vista, I get the error 0800f0900
I tried everything to windows update. Usually, I would get my updates but not Vista SP2. I have the Vista SP1. I tried to download Microsoft security updates, you name I did. Help, please.
Hello
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
no further details
It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.
See:
-
I'm resetting of creation of a network of small business @ a client Office. They had a network configuration before but she was lost. I reset the network and made sure that we were on the same workgroup. All works well for a month. Then yesterday they not access network. I have performed remotely in Win XP main machine (two Win 7 machinces on the network). He failed. What is the failure of router? He could not computers ping, ip, etc...
Hello
The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Just noticed newspapers Windows for my 6/iR PERC have been reporting these errors almost every day for a year, is my bad controller? If Yes this is very unfortunate because it is integrated.
1.) sense unexpected. SCSI sense data: Sense key: sense 3:11 qualifier detection code: 1: physical disk 0:0:0 controller 0, slot 0
2.) SAS port report: SAS wide port 0 link lost on PHY 0. : controller 0 (SAS 6/iR integrated)
3.) predictive Failure reported: physical disk 0:0:0 Controller 0, slot 0
4.) (ERROR MORE RECURRING): a disk media error has been corrected. : virtual disk 0 (virtual disk 0) controller 0 (SAS 6/iR integrated)
5.) \Device\RaidPort0, restore the device, has been published.
Hello.
In addition to the Windows logs, what is the status of the disk (VD) virtual and physical disk 0:0:0 in the BIOS of the controller or the OpenManage Server administrator? If the status of predictive failure is constantly reported, then you can consider replacing the physical disk 0:0:0. If the replaced disk is offline, try to force if online via the controller BIOS. Make sure that your BIOS and controller firmware is up-to-date.
-
Outlook 2010 offline Exchange Server after Windows 7 has been locked up for more than 1 hour
Hi guys,.
I recently got upgraded to Windows 7 at work. I have rules that run scripts first thing in the morning and then run macros and so I have data ready for when I get into work.The problem is that when Windows 7 is locked for more than 1 hour for a reason any Outlook is disconnected Microsoft Exchange then it is impossible to retrieve emails and my scripts don't end up running.What can be done to fix this? When I had XP it wasn't drama leaving the computer locked at night, everything went very well. What has changed for Windows 7?It's not only Outlook which disconnects it seems all my connections are disconnected however outlook is my main concern.Kind regardszystofHi sirot,.
I was sent here from my previous post as they said it was a windows problem. Laughing out loudin any case, I think I could have solved the problem. I changed the send/receive settings.In the file-> Options-> advanced. In the Send/received subcategory, click send/receive.Here, I've changed schedule a shipment / automatic reception from 30 minutes to 10 minutes.This seems to keep the connection with the assets of the Exchange Server.Kind regardsChris -
AM very couldn't send Windows Mail or Messenger for more than a year angry. windows excuse is the error code to do with my server. the error code is your reference, not mine! Im very disopointed not being able to use the product directly to the description. GTE frustrated Windows defender blocking programs iv has spent £30, to try to correct the mistakes? and still no better off?
Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.
Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you
-
SR 3015 HP Pavilion dv6 8.1 Windows x 64
Good afternoon. Installed a new windows 8.1, pilots have become almost everything automatically, except one. I found the missing driver with help DriverPack Solution 14 R407. But this problem is not resolved, I don't work mode "sleep" after having closed the back cover, he did not return to the standby mode. Dear experts please help with utilities for HP Pavilion dv6 SR 3015 windows 8.1 x 64, where I can download the full program or game required for this model. The fact that on the official site, this model HP Pavilion dv6 SR 3015 supports only windows 7. Thanks in advance for your collaboration. HP - OUR CHOICE!
I want to add that, after installing windows 8.1 x 64 does not work its LED button, it remains lit in red when turned on or off
Maybe you are looking for
-
How do I know if I have viruses / whatever
It seems that 'my computer' is send emails since, apparently, sent my items... to those who who do not have them. How to stop this... or if I have a virus / whatever? Also send emails to myself with nothing else than a "zip" attached file?
-
Office jet pro 8600: vertical lines on photos
for many years, I printed excellent photos, what impression one thin vertical black line have published recently in several places on the photo. I cleaned the heads and still get the same results. How can I go back to a photo impression?
-
Hello guys,. I'm working on an application which, stat-up, read a few basic values of configuration in a file and passes control ring text, such as an ini file. The ring text control is ideal for use in the blocks diagram because I can choose a speci
-
PROBLEMS WITH THE UPDATES AND INTERNET
WHENEVER MY COMPUTER DID AN UPDATE AFTER THE UPDATE I CAN'T GO ON THE INTERNET, I HAVE TO RESTORE TO A TIME BEFORE THE UPDATE, ALSO WHEN I TRIED TO DOWNLOAD JAVA AND FLASH, IT WOULDN'T LET ME ON THE INTERNET, NONE OF THE TWO, I HAVE A LAPTOP TOSHIBA
-
How to disable Wi - Fi on MG6220?
Is it possible to turn off Wi - Fi printer?I use a Canon MG6220 printer on Windows 7.I'm using the cable USB and no more need of LAN wireless. Thank you.