Pavilion dv6 DV6-1215AX: errors when reinstalling Vista OS?

Similar Questions

• Get an IRQL error when reinstalling Vista on a formatted HARD drive.

  My (HP a1700n) office has been very slow, perhaps a virus. I ran Norton NIS and also had Norton disk utilities cleaner. Before that the Office stopped completely, I was able to shoot the important things (pictures, videos, etc) nothing else I could lose and wasted. I decided to start over and reinstall the Vista operating system, since I don't have the disk. Has gone so far as to choose the partition and after that he began to «analyze...» "it froze and gave me some kind of error that the partition not could not be found or something like that, well I deleted the partition with the recovery partition since I created a disc a new partition using all the available space, but now I get the not_les_than_ error message. I only go as far as to choose the partion and starts to analyze then the BSOD appears. I did not add anything other than a 1 GB of ram and I removed it, so now the computer only has the 1 GB it is came with, everything else is what came with when I bought it 2 years ago. I don't know if it's hardware related or I'm doing something wrong.

  Any help would be greatly appreciated.

  Eric

  If you get BSOD when installing, try the Vista repair Forum for advice and give them all the details of BSOD error.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Fan cooling 90 b on Windows 7 Pavilion dv6-3225dx error

  Hi, I have a HP Pavilion dv6-3225dx, winddws 7 64 bit laptop for over a year and I started to receive a black screen at startup which said cooling fan error 90 b problem.

  The problem started when I was still at school and I had to watch this long movie for an assignment.

  The error would only be the beginning on all 2-3 weeks or so, one or two times, and especially when I turn it night and turn it on again 12 hours the next day later. I tried to update the BIOs from HP support assistant menu, but twice the update failed once it restarts after a update.

  When the laptop starts it starts smoothly without problem, and the fan does not strong when the error screen appears.

  A friend told me it might be dusty inside the fan or the fan needs to be replaced. But I thought I'd ask around on the forum to see if anyone has a solution (maybe something is not installed?)

  the BIO system version is F.29

  Thank you!

  Hello:

  Your friend is correct.

  I would try cleaning first cooling system since it is the best thing to do.

  Unplug the computer and remove the battery.

  Get a can of compressed air at your local office supply store.

  Put a toothpick in the air intake fan and place it between two of the fan so the fan blades don't pinwheel when you spray compressed air, as setting the fan will ruin the bearings.

  Spray the air in two ways - through the socket of the fan and the exhaust fan vents. Do a couple of times until you see no more than dust coming out ducts.

  Failure to remedy the problem then maybe the fan/radiator Assembly will be replaced.

  Looking at the specifications of product for your laptop, it seems that the Fan/Heatsink Assembly you need is

  603690 001.

  Consult the service manual, Chapter 3, page 21 for more information and Chapter 4 for the procedures for removal and replacement.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

• HP Pavilion dv6 2021TX: error code-72352777

  Enter the administrator password or power on password... hp Pavilion dv6-2120tx... pls help me... error code 72352777. kindly help

  @saget

  Enter 63030379

  Kind regards

  DP - K

• Pavilion DV6 - 1247CL upgrade from Windows Vista to Windows 8. 1

  I want to improve my Pavilion DV6 - 1247 CL Windows Vista at Windows 8. 1. I read on the site of Microsoft support that the only way to upgrade Vista to Windows 8.1 must do a clean install of DVD. Will I have problems with the HP drivers, etc... ? If so, what should I do to avoid these problems?

  Yes there is no direct upgrade path from Vista to Windows 8. 1. I provide a counterpoint here. Your laptop is powerful enough to run Windows 8/8.1 and I bet all the drivers work just very rare possible exceptions that will be easy to fix. I would say what you can do to give up Vista is a good thing. You might want to consider Windows 7 as an alternative, but all that will take place in 7 runs generally 8/8.1.

• FSX 1722 error when reinstalling windows 8

  Hi, I recently bought a new laptop from MSI game with win 64 8 x but before installing FSX it tells me 1722, but it is almost done and I tried the CMD thing and it did not work I tried first of all it does not work waiting time tried also does not (due to error HAUL)

  And who have been something that I was expecting more than 5 months!

  See if you can adapt this for Windows 8 and then use it as a guide for setting error 1722.

  HP Scanjet products - Windows Installer MSI display errors during the Installation of the product
  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=1118287&prodTypeId=15179&prodSeriesId=1118287&ObjectID=c01278160

  Have you tried?  If so make sure that you right click on CMD.exe and use the option 'run as Admin '.  Perform, even if your own username is administrator.

  Error 1722 when reinstalling Flight Simulator X

  http://support.Microsoft.com/kb/928080

  Error 1722 FSX 8 windows installation

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/error-1722-when-installing-FSX-Windows-8/6d465c3e-9FB4-4287-aa5e-631c30b1c6ae

  How to open a command prompt in Windows 8
  http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-Windows-8/

• On the Pavilion dv6 network error

  I use a HP Pavilion d6-2190us. operating system is Windows 7 64 bit. When I started this morning, I was greeted with the following error:

  Windows has detected an IP address conflict
  Another computer on the network has the same IP address that
  This computer. Contact your network administrator for help
  to resolve this issue. More details are available in the windows
  In the system event log.

  Since I'm only one computer on my wireless network, it is quite confusing. What measures, if any, should be taken?

  I had this problem in the past with a laptop. To resolve this problem, all you need to do is restart the modem. I would recommend the tension of your devices (printer and laptop, pull the power cable to the back of your wireless router or modem, wait 30 seconds and plug it back. When all the lights are back on and stabilized, turn on your laptop and printer. When they finish of turning it back on, the router will assign them new IP addresses. This should prevent you from having more conflicting IP addresses.

• Pavilion DV6 LAN driver issues on Vista 64

  Hi guys,.

  Just installed Vista Ultimate 64-bit on your laptop DV6-1131EA but I have problems with the network drivers.

  Despite the page drivers for my laptop with Broadcom LAN drivers, Device Manager displays an installed Realtek LAN device but does not.

  Tried to install the Broadcom drivers anyway and update the drivers for the Realtek device but no luck.

  What should I do?

  Thanks for your time.

  Try a driver Realtek LAN wired HERE directly

  For the wireless... you may need to Atheros rather than Broadcom.

• Pavilion dv6 3140SA freezes when plugging in / deleting USB items

  When I plug my USB PC keyboard will freeze for anything in 5 minutes. The hard drive light is constant and nothing works. The screen freezes, but if I watch a movie on the sky, for example, the sound will continue. This also happens if I remove a USB device (stick of memory, for example) without first turn it off in the remove the material Panel. Some devices (keyboard and mouse, for example) do not appear in the hardware Panel remove but once again, they can cause the lock to the top occurs when I remove them. I am running the latest version of the BIOS, Windows 7 64 bit.

  Any suggestions would be welcome.

  Hello Fattage.

  Your USB ports will cause the computer to freeze.

  Go to Device Manager, uninstall the USB port and restart the computer.

  This uninstall and reinstall the drivers for the ports.

  Here is a link to the Device Manager.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  If he has not visited for a long time the problem started, you can run a system restore.
  
  
  
  This will bring the system back to when everything worked correctly without affecting your personal files.
  
  
  
  
  
  Here is a link on how to do a restore.

  I would like to know how everything goes

  Nice day.

• Pavilion dv6 LY090UA #ABC: I reinstalled Windows 7 and my wireless network adapter does not work

  I just reinstalled windows 7 and I can not get my work a wireless adapter. I went in all directions looking for drivers to use and everyone I try does not work.

  I tried:

  Atheros Wireless LAN Driver 2011

  I saw someone talking about DriveTheLife in another forum and decided to try it.

  IT WORKS LIKE MAGIC, I don't know how he did it but he found and installed all the drivers I needed!

• I lost my files when reinstalled vista.

  I need to know why files got wiped out. Norton worked in my system and all of a sudden updates has been reinstalled windows vista. I lost my files...

  I don't know why or how Vista has been reinstalled (you have a partition recovery with a keyboard command to access it, or did you have the recovery disc or the installation disc in the drive)?  If it occurred in a clean install (which is most likely), then the hard drive was wiped clean of everything (you probably have Norton or any of your other programs more either) and the recovery will be difficult and largely a matter of chance.  If it occurred as a repair/upgrade (which I do not see how it could happen) then the files and programs will still be there (even if perhaps not in the same place even though they should be another reason, I think that it was a facility clean return to the conditions of the factory).   Norton has been known to do strange things to the systems (I do not recommend one of their products - there are better alternatives, some of which are even free - poster back if you want some recommendations - it could happen), but this is the first time I've heard of him causing a re-installation of the operating system (but it is not beyond the realm of possibility - the update could have triggered the order of re-setup in a way (, or maybe you accidentally hit the order during the process).

  There is no way to recover your programs or settings (unless you have a full image backup - that will recover your data as well), but there is a small chance for your data (or at least a part of it).  You have even a normal backup of your data available - which could save you here?

  Here are some free recovery programs that might help (try recuva) but read the following before doing anything else on your PC.  The fact that you did so (including re - install the operating system) goes against what is successful-, but it's worth a try.

  http://www.r-TT.com/

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://www.SnapFiles.com/get/undeleteplus.html

  http://www.Piriform.com/Recuva

  http://www.munsoft.com/EasyDriveDataRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they offer generally no guarantees (meaning you pay full price no matter how much or how little they recover).  In the circumstances, I don't think that even they will be able to recover all or maybe not even most of it.  The decision is yours.

  I'm sorry that what happened to you - it's very bad luck.  Subsequently, please keep a backup of your data to protect you from happening again (or any number of other issues that could lose your data).  Even better would be a full image backup that would preserve your system as it was when it was backed up (including programs, settings, data and all the rest).

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• Get the error when reinstalling windows 7 on the drivers

  Im having a problem reinstalling windows, I hope someone can help me the finishing process.

  When I start the machine I get an error saying please insert boot media device., so I inserted my disc of windows 7 to begin the intall

  I chose Custom just to do a clean install but when comes the next page, it says that I have not all drivers. I guess his doesn't see is not my hard drive and I have no option to choose and im stuck in this page... can someone help me with this one

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Yahoo messenger gives configuration is incorrect error when reinstalling

  I tried to reinstall yahoo messenger and an error message appears, which stipulated that "the program could not start because the configuration is incorrect and try reinstalling the program. I did and I still can't get into my e-mail. What should I do to fix this?

  Contact Yahoo to fix the problem with Yahoo Messenger.

• 0xc0000033 error when installing Vista Service Pack 1

  I have a Tablet HP that I install Vista SP1, but instead I immediately get an error 0xc0000033. (The application could not initialize properly (0xc0000033). A message appears saying that MS Installer has stopped working the event name APPCRASH problem. I tried to turn off the system update service, delete the C:\Windows\SoftwareDistribution and restarted the service, but I get the same error. Any ideas?

  Have you tried this link

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-code-0xc0000033/20cd6678-A916-45CD-A038-433ed185ae21

  Run SFC

  http://support.Microsoft.com/kb/929833

  Bravo to fly high!

• Error when reinstalling windows from recovery disks

  My laptop crashed and could not find Windows, so I ordered a recovery disk (TR-IM00209299 - Win7 64 bit HomePremium (NH) SP1) through Toshiba recovery media shop. Now that I got the Windows 7 recovery discs, but they do not install successfully, and I'm not clear if there is an error on the discs I received or a problem with the hardware. Here are the details of the error. Is it a mistake that some of you know? Please notify

  Unpack the system/Windows re...
  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.
  Version6.1.7600.16385

  Error opening file V:\HDDRecovery\SWImg\15583XSP.swm
  These data are incorrect.

  ERROR: ImageX could not apply system/WinRE V:\HDDRecovery\SWImg\15583XSP.swm index 1 of the HARD drive to W:!
  Press any key to continue

  Are you able to boot from other bootable disks?
  If so, then it means that your hardware (optical disc ODD) should be ok and the problem is associated with disc.

  Contact the reseller of disc (Arvato?) and ask again drive