Pavilion dv6 Validity Sensor does not work

Similar Questions

• Validity Sensor does not work after a while

  Hello

  I have a HP DV5t with windows Vista running on it. The fingerprint sensor works very well for a while when the system is started, but then does not respond when I slide my finger on it.

  In addition, I go to services and see the service Validity Sensor has the status 'on the road', but then when I restart the sensor service starts to meet again for a short period of time before it returns to the dormant mode again.

  The time it takes to reach the stage where it stops responding is not consistent. Could you please help me identify the problem and fix it?

  just an info. . I tried recovering system, driver upgrades/restorations to date but in vain.

  Thanks a ton!

  Prashanth

  I think you're right and it comes down to a driver problem.
  There is probably a problem with the sensor when it shuts down or trying to 'wake up '.
  Whatever it is, you will probably have to wait just for the seller to come out with a patch.

  Are there settings in software sensor that have to do with power? I doubt it, but it's worth the trip.
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv6-2170eo: UEFI does not work on the Pavilion dv6-2170eo

  I updated the BIOS on my Pavilion dv6-2170eo of the e.17 release (I think) for F.1CA, the last of them. I have installed Windows 8.1.

  As there was no partition HP_TOOLS, I could not use the BIOS Setup. I created a HP_TOOLS partition and installed the HP System Diagnostics UEFI, sp52093.exe, but I can't always run the tools of diagnosis or the configuration of the BIOS. When I press ESC, F2 or F10 when booting the computer locks.

  If there is no other solution, I would like to go back to an older version of BIOS, without EFI, because it worked well before. Where can I find such a version?

  Forget it. I misunderstood the problem.

• Pavilion dv6 / Ralink wifi does not work

  Hi, I'm installing win7 on my computer, but I can't use a wifi adapter. By HP utility I have the correct driver, but my wifi can not see any network. When I press F12, led changing color but I don't have to display information on the wifi adapter and in Device Manager is stil wifi on, but bluetooth adapter change its visibility.

  pavilion dv6-6b85ec is my computer, wifi adapter is Ralink RT5390BC8 and installed driver is the HP website sp56889.exe.

  Thanks for help.

  So, today, I put inside the battery and unplug the AC adapter / CC and then I noticed that my wifi indicator have a yellow star, finally! I don't know why. I thing it's occur after I have inserted the battery. So my problem is solved, thank you for your help!

• HP Pavilion dv6-6154nr: cpu does not work

  Hi all! Recently, I cleaned my cooler fans that my laptop had a sound strong. When I reassembled all the pieces, I that I had discovered this comp. is not the scene. The screen is black and the capslock flashes once preiodically. I discovered that can be a CPU problem. I tried the 'dry power up' method, and it did not help. If someone in front of the same problem, please could you write your solution or maybe someone knows what to do? Thanks in advance.

  Ok.

  If it worked before you took it apart, it means dismantling to see what you missed when assembling it.  You may need to have someone with more experience to take a peek. This usually means a shop or HP.

• HP Pavilion dv6-6103er: sound does not work on your laptop. With the audio driver IDT high definition (HD) 6.10.6330.0 Rev.

  
  

  Hello:

  See if this driver works for you...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• HP Pavilion dv6 3127tx: Microphone does not work on Windows 10 IDT High Definition Audio Driver 64 bit?

  After 10 of Windows upgrade to Windows 7 facing big problem with my table Microphone internal (IDT High Definition Audio Codec): '(incapable d'utiliser Skype à Cortana et plus encore... s'il vous plaît essayer de résoudre dès que possible.)

  Thanks and greetings
  HP laptop Lover

  Hello @Shas_HP,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the Microphone and wanted to help you!

  First of all, try to use the HP Support Assistant to find updates for your Audio drivers.  I also recommend to use back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10
  
  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on the update of Windows 10 for a few weeks, until what drivers can be updated.

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• HP DM4-2070US fingerprint sensor does not work

  I have a HP DM4-2070us, and the sensor does not work. I reinstalled Win 7 Pro 64 bit with all the drivers of HP and all updates from MS, but the HP Simplepass software will not recognize the drive. I uninstalled the driver and Simplepass software and reinstalled both using all versions listed for my model on the support page of the HP drivers. The drive is correctly listed and shows installed in Windows 7 Device Manager. I installed another unit of material Validity Sensor and still the same issue.

  Yes, so apparently the software downloads & driver from HP support was insufficient to restore the function of sensor of fingerprint on top a new installation. It's a machine on which someone had partitioned and formatted the drive. I cloned the drive from an another DM4-2070us with the original configuration of the software and then it worked. Thanks for the suggestion.

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• The fingerprint sensor does not work

  Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Thank you for your attention

  I finally found the problem reset the pc thanks for your attention somehow

  Good day.

• my laptop computer vpcsb16fg prints print sensor does not work

  I have sony vaio vpcsb16fg notebook and his impression fingerprint sensor does not work as I had sony remote India too but I was told that my laptop is having hardware problem, help and how this problem will be corrected.

  Hello Verhoeven.

  Try following the steps below and check if it works:

  Download and install the driver of fingerprints from here: http://download.sony-asia.com.edgesuite.net/vaio/downloads/Win7Original/20111Q/VPCSB/AUDFPD-00243103...

  Then, reinstall software TrueSuite software VAIO Care following all the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1017143

  Then, try to register a fingerprint and check if it works.

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony support team in your country to start the service: http://www.sony.net/SonyInfo/Support/

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Envy of HP dv6 7210TX: Validity Sensor does not not on windows 10

  I recently installed windows 10 and downloaded the validity on the site sensor but the sensor does not, what may be the problem and how to solve?

  @faisalabir

  Although there is not a Windows 10 validity driver for your system, Windows 8 driver can work.

  sp58900 validity sensor V4.4.234.0 W8 - W8.1

  To use the program SimplePass, know that before, you can do if you need complete a few items:

  Implementation / assign a PIN code in settings PC as if you are going to use Windows Hello.  The PIN code is necessary, regardless of whether you actually 'Hello' - requirement for the PIN code is an additional security that Windows has put in place.

  Without taking into account Simplepass, you want to get the native Windows logon work of fingerprints - while the Windows logon provides access to Web sites, it does not support connecting to your computer.

  Once arrived at the point where you're ready for SimplePass, you want to use the latest version of the program in the respective series.

  There are two different flavors of SimplePass:

  • Windows 7 through Windows 10: series 6 HP SimplePass V6.0.100.276 (AuthenTec)
  • Windows 7-Windows 10: series 8 HP SimplePass V8.01.46A and upward (Softex)

  These "flavors" are programs separated; You cannot 'upgrade' of series 6 to 8 sets - you can change the program from one genre to the other, that is, remove one and install on the other.

  -------------------------------------------------------------------------

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Article (s):

  • Order of events is important
  • Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Pavillion dv7 6c95dx: print software prints and SimplePass sensor does not work

  Hey there,

  I have a HP Pavilion dv7-6c95dx and prints print sensor and SimplePass software does not work.  I am unable to find the relevant drivers/etc on HP website.  Any advice would be appreciated.  The unit was bought in the USA.

  Thank you.

  Hello:

  I think that this driver since the dv7t-7000 will work as well as the security software to save your fingerprint.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

• Pavilion DV6-2140ED: Pavilion DV6: 10 Windows does not start after the upgrade memory (4 GB-> 8 GB)

  After I upgraded the RAM in my HP DV6 from 4 GB to 8 GB (2 x 4 GB Kingston KTA-MB1333 / 4G), Windows no longer starts. I get a blue screen and it keeps restarting.

  I think that the memory specifications are similar to the Samsung M471B5673EH1-CH9 original memory: Ghz 1333, non - ecc, 1.5 volts, case latency 9 etc.etc.

  It's a laptop DV6-2140ED HP with a processor Intel i5 - 430 m and Intel mobile chipset HM55.

  The bios detects 8 GB and it also passes the check/test of memory. As far as I know that I have also installed the latest bios firmware: F.1D. Reinstall my Windows 10 64 bit does not work either: with 8 GB I also get blue screens, after I try to boot my Windows 10 bootable USB drive.

  I read other people having the same problem, but I have not read a solution yet. What can we do about it?

  Hello:

  Please see this discussion.  You buy a very specific memory for any HP laptop with Mobile Intel 5 series chipset.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/memory-upgrade-6550b/m-p/5340551/highlight/true#M207994

• Windows 8.1 installed on my HP Pavilion g7 & Player DVD does not work

  Hi all, I installed Windows 8.1 on my HP Pavilion g7 and now my DVD player does not work for some reason, ideas? I tried troubleshooting and it detects that there is a problem with the USB - IF USB Host Controller xHCI driverfor.

  THX,

  GSlice

  Hello:

  I would try each of the steps in resolution 2, 3, 4 and 5 on the link below.

  One of them can work.

  http://support.Microsoft.com/kb/314060